Trapping of soursop (Annona muricata) juice volatiles on porapak Q by suction

The trapping technique of Singleton and Pattee, in which the volatiles are swept to a Porapak Q trap by suction rather than by a sweeping gas, was modified and used to isolate soursop juice volatiles. Using fixed, low vacuum and operating conditions determined specifically for soursop volatiles, very high reproducibility was obtained. The majority of the peaks had a coefficient of variation less than 0.10. The relative amounts of the volatile components obtained by direct headspace sampling was fairly well maintained in the Porapak Q concentrate. The chromatograms showed distinct differences between two commercial brands or between lots of the same brand of soursop juice. The trapping technique appear to have wide applicability provided that the operating conditions are adapted to each product studied.     

Synthesis and Characterization of 2D Molybdenum Carbide (MXene)

Large scale synthesis and delamination of 2D Mo₂CT _x (where T is a surface termination group) has been achieved by selectively etching gallium from the recently discovered nanolaminated, ternary transition metal carbide Mo₂Ga₂C. Different synthesis and delamination routes result in different flake morphologies. The resistivity of free‐standing Mo₂CT _x films increases by an order of magnitude as the temperature is reduced from 300 to 10 K, suggesting semiconductor‐like behavior of this MXene, in contrast to Ti₃C₂T _x which exhibits metallic behavior. At 10 K, the magnetoresistance is positive. Additionally, changes in electronic transport are observed upon annealing of the films. When 2 μm thick films are tested as electrodes in supercapacitors, capacitances as high as 700 F cm^?3 in a 1 m sulfuric acid electrolyte and high capacity retention for at least 10,000 cycles at 10 A g^?1 are obtained. Free‐standing Mo₂CT _x films, with ≈8 wt% carbon nanotubes, perform well when tested as an electrode material for Li‐ions, especially at high rates. At 20 and 131 C cycling rates, stable reversible capacities of 250 and 76 mAh g^?1, respectively, are achieved for over 1000 cycles.     

Bandwidth Control and Symmetry Breaking in a Mott-Hubbard Correlated Metal

In Mott materials strong electron correlation yields a spectrum of complex electronic structures. Recent synthesis advancements open realistic opportunities for harnessing Mott physics to design transformative devices. However, a major bottleneck in realizing such devices remains the lack of control over the electron correlation strength. This stems from the complexity of the electronic structure, which often veils the basic mechanisms underlying the correlation strength. This study presents control of the correlation strength by tuning the degree of orbital overlap using picometer-scale lattice engineering. This study illustrates how bandwidth control and concurrent symmetry breaking can govern the electronic structure of a correlated SrVO₃ model system. This study shows how tensile and compressive biaxial strain oppositely affect the SrVO₃ in-plane and out-of-plane orbital occupancy, resulting in the partial alleviation of the orbital degeneracy. The spectral weight redistribution under strain is derived and explained, which illustrates how high tensile strain drives the system toward a Mott insulating state. Implementation of such concepts can push correlated electron phenomena closer toward new solid-state devices and circuits. These findings therefore pave the way for understanding and controlling electron correlation in a broad range of functional materials, driving this powerful resource for novel electronics closer toward practical realization.     

Immunocytochemical study of alpha 1 and beta 2/3 subunits of GABAA receptors in freehand isolated vestibular Deiters' neurons

Vestibular Deiters' neurons have been isolated from bovine brain by the Hydén's freehand dissection technique and challenged with monoclonal antibodies directed toward the alpha 1 and beta 2/3 subunits of the GABAA receptors. Subsequent challenge with fluorescent secondary antibodies and confocal microscopy allowed the study of the cellular distribution of such subunits. In Deiters' neurons the beta 2/3 subunit displayed a clear presence all along the cell body profile and the initial parts of the dendrites. The alpha 1 subunit was found highly present all over the cell interior except the nuclear profiles. The strong presence inside the cells possibly masked its presence on the plasma membrane. However, in part of the cells studied a distinct presence on the plasma membrane was evident. This subunit was visualized also all along the long dendrites of these neurons. The approach we describe here, involving freehand isolated mature neurons from adult animals, may allow a better characterization of the tridimensional distribution of different types of neuronal GABAA receptors in the respect of the approach with brain slices.     

Bio-cellular processes modeling on silicon substrate: receptor–ligand binding and Michaelis Menten reaction

Reducing transmit power is the most straightforward way towards more energy-efficient communications, but it results in lower SNRs at the receiver which can add a performance and/or complexity cost. At low SNRs, synchronization and channel estimation errors erode much of the gains achieved through powerful turbo and LDPC codes. Further expanding the turbo concept through an iterative receiver—which brings synchronization and equalization modules inside the loop—can help, but this solution is prohibitively complex and it is not clear what can and what cannot be a part of the iterative structure. This paper fills two important gaps in this field: (1) as compared to previous research which either focuses on a subset of the problem assuming perfect remaining parameters or is computationally too complex, we propose a proper partitioning of algorithm blocks in the iterative receiver for manageable delay and complexity, and (2) to the best of our knowledge, this is the first physical demonstration of an iterative receiver based on experimental radio hardware. We have found that for such a receiver to work, (1) iterative timing synchronization is impractical, iterative carrier synchronization can be avoided by using our proposed approach, while iterative channel estimation is essential, and (2) the SNR gains claimed in previous publications are validated in indoor channels. Finally, we propose a heuristic algorithm for simplifying the carrier phase synchronization in an iterative receiver such that computations of the log likelihood ratios of the parity bits can be avoided to strike a tradeoff between complexity and performance.     

Microstructure and domain configurations in ferroelectric PbTiO3 and Pb(Zr,Ti)O3 thin fims

Ferroelectric domain configurations in PbTiO₃ and Pb(Zr_xT_1−x)O₃ (PZT, x = 0.3 or 0.5) thin films have been studied by transmission electron microscopy. The PbTiOg and PZT thin films have been deposited by the ionized cluster beam technique and radio frequency sputtering, respectively. The grain size in these thin films is typically less than 0.5 μm. Lamellar 90°-domain features have been observed in both PbTiO₃ and PZT (30/70) samples. The domain walls correspond to the {011} twin boundaries. La-doping and Ca-modification are shown to affect the microstructure of the PZT films. No clear domain feature occurs in the PZT thin film that has composition near the morphotropic phase boundary. The effects of grain sizes are briefly discussed.     

Pacemaker interference by magnetic fields at power line frequencies

Human exposure to external 50/60-Hz electric and magnetic fields induces electric fields within the body. These induced fields can cause interference with implanted pacemakers. In the case of exposure to magnetic fields, the pacemaker leads are subject to induced electromotive forces, with current return paths being provided by the conducting body tissues. Modern computing resources used in conjunction with millimeter-scale human body conductivity models make numerical modeling a viable technique for examining any such interference. In this paper, an existing well-verified scalar-potential finite-difference frequency-domain code is modified to handle thin conducting wires embedded in the body. The effects of each wire can be included numerically by a simple modification to the existing code. Results are computed for two pacemaker lead insertion paths, terminating at either atrial or ventricular electrodes in the heart. Computations are performed for three orthogonal 60-Hz magnetic field orientations. Comparison with simplified estimates from Faraday's law applied directly to extracorporeal loops representing unipolar leads underscores problems associated with this simplified approach. Numerically estimated electromagnetic interference (EMI) levels under the worst case scenarios are about 40 microT for atrial electrodes, and 140 microT for ventricular electrodes. These methods could also be applied to studying EMI with other implanted devices such as cardiac defibrillators.     

Characteristics of the heterologously expressed human lanosterol 14α‐demethylase (other names: P45014DM,CYP51, P45051) and inhibition of the purified human and Candida albicans CYP51 with azole antifungal agents

Human and Candida albicans CYP51 were purified to homogeneity after GAL10‐based heterologous expression in yeast in order to resolve the basis for the selective inhibition of the fungal enzyme over the human orthologue by the azole drugs ketoconazole and itraconazole, used in the treatment of systemic fungal infection. The purified proteins have similar spectral characteristics, both giving a maximum at 448 nm in reduced carbon monoxide difference spectra. Substrate affinity constants of 20·8 and 29·4 μM and V_max of 0·15 and 0·47 nmol/min/nmol were observed for C. albicans and human enzymes, respectively, in reconstituted enzymatic assays, using an intermediate of the demethylation reaction [32‐³H]‐3β‐hydroxylanost‐7‐en‐32‐ol as the substrate. Both enzymes gave similar type II spectra on titration with drugs, but a reduced affinity was observed for human CYP51 using the ability of carbon monoxide to displace the drug as a ligand and by calculation of IC₅₀. However, although the results indicate higher affinity of the drugs for their target CYP51 in the major fungal pathogen C. albicans, when compared directly to CYP51 from humans, the difference was less than 10‐fold. This difference is an order of magnitude lower than previously reported data based on measurements using unpurified human CYP51 enzyme preparations. Consequently, increased azole doses to combat resistant candidaemia may well inhibit endogenous human CYP51 and the potential consequences are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Hydroxyapatite Modified with Carbon‐Nanotube‐Reinforced Poly(methyl methacrylate): A Nanocomposite Material for Biomedical Applications

The paper reports on a freeze‐granulation technique to prepare a novel nanocomposite of poly(methyl methacrylate) (PMMA)‐modified hydroxyapatite (HA) with multiwalled carbon nanotubes (MWCNTs) as reinforcement for a new generation biomedical bone cement and implant coatings. By using this technique it is possible to increase material homogeneity and also enhance the dispersion of MWCNTs in the composite matrix. The phase composition and the surface morphology of the nanocomposite material were studied using X‐ray diffraction, field‐emission scanning electron microscopy, and micro‐Raman spectroscopy. Additionally, nanomechanical properties of different concentrations of MWCNT‐reinforced nanocomposite were performed by a nanoindentation technique, which indicates that a concentration of 0.1 wt % MWCNTs in the PMMA/HA nanocomposite material gives the best mechanical properties.