The influence of spiral jet-milling on the physicochemical properties of carbamazepine form III crystals: Quality by design approach

The purpose of this study was to investigate the influence of spiral jet-milling process on the physicochemical characteristics of α polymorphic active pharmaceutical ingredient, using Carbamazepine form III as a model drug, and taking into consideration Quality by Design (QbD) approach to pharmaceutical development. A 2^(4-1) factorial screening design was implemented to identify the spiral jet-milling process variables that significantly affect the particle size distribution of milled samples. Diameter of injector nozzles, diameter of ring nozzles and air pressure were selected for further analysis using a 2^(3-1) factorial experimental design. Particle size distribution of additional samples was determined, while physicochemical properties were examined by differential scanning calorimetry (DSC), hot-stage polarized microscopy (HSPM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and compared to those of un-milled drug. The gathered results shown that applied experimental design approach is capable to predict material behavior and could help in better understanding of material behavior during jet-milling process. Created design space (DS) provides assurance of product quality, expressed as the powder particle sizes lower than 5 μm, as well as, in initial polymorph form existence after jet-milling through combination and interaction of input variables.     

Effect of supercritical CO2 extraction process parameters on oil yield and pigment content from by‐product hemp cake

This research gives an insight into the possibility of exploiting the one of the food industry's by‐products – pressed hemp cake. The complete recovery of oil from pressed hemp cake was achieved. Residual oil that remained in cake after pressing was extracted with supercritical CO₂ by applying different process parameters. Optimal extraction conditions were determined using response surface methodology. Total pigment contents of the oils obtained were determined. Extraction pressure had the most significant influence on yield and pigment content of extracted hemp cake oil. Depending on the pressure, the chlorophyll a content ranged from 101.11 to 378.28 mg kg^?1 and chlorophyll b from 65.14 to 189.78 mg kg^?1, while total carotene content was in the range from 33.58 to 132.67 mg kg^?1. The remaining oil in pressed hemp cake after supercritical CO₂ extraction was determined to be 0.56 ± 0.08% and the defatted cake was rich in proteins and fibre.     

Visualization of the Centre of Projection Geometrical Locus in a Single Image

Single view reconstruction (SVR) is an important approach for 3D shape recovery since many non‐existing buildings and scenes are captured in a single image. Historical photographs are often the most precise source for virtual reconstruction of a damaged cultural heritage. In semi‐automated techniques, that are mainly used under practical situations, the user is the one who recognizes and selects constraints to be used. Hence, the veridicality and the accuracy of the final model partially rely on man‐based decisions. We noticed that users, especially non‐expert users such as cultural heritage professionals, usually do not fully understand the SVR process, which is why they have trouble in decision making while modelling. That often fundamentally affects the quality of the final 3D models. Considering the importance of human performance in SVR approaches, in this paper we offer a solution that can be used to reduce the amount of user errors. Specifically, we address the problem of locating the centre of projection (CP). We introduce a tool set for 3D visualization of the CP's geometrical loci that provides the user with a clear idea of how the CP's location is determined. Thanks to this type of visualization, the user becomes aware of the following: (1) the constraint relevant for CP location, (2) the image suitable for SVR, (3) more constraints for CP location required, (4) which constraints should be used for the best match, (5) will additional constraints create a useful redundancy. In order to test our approach and the assumptions it relies on, we compared the amount of user made errors in the standard approaches with the one in which additional visualization is provided.     

The kinetic and thermodynamic analysis of ultrasound-extraction of minerals from aerial parts of white lady's bedstraw (Galium mollugo L.)

The present paper deals with the extraction of some minerals (potassium, calcium and magnesium) from ground, dried aerial parts of white lady's bedstraw (Galium mollugo L.) using an aqueous ethanol solution (50% by volume) at different temperatures (from 23 to 40 °C) in the presence and absence of ultrasound. The main goal was to establish the kinetics and the thermodynamics of the two extraction processes. A phenomenological model involving simultaneous washing and diffusion was proved for both ultrasound-assisted and silent extraction of the minerals. The minerals extraction both in the presence and the absence of ultrasound is endothermic and irreversible since the enthalpy change and the entropy change are positive in the ranges of extraction temperature applied. The Gibbs free energy change for the extraction of minerals is negative, indicating that the process is feasible and spontaneous. The minerals yield increased by a factor of 1.02–1.06 and 1.14–1.27 in the absence and the presence of ultrasound, respectively for every 10 °C rise in temperature.     

High value polyurethane resins from rubber seed oil

Rubber seed oil having high free fatty acid content and high unsaturation was used to obtain high quality polyurethane resins through epoxidation and ring opening with methanol and free fatty acids. Two polyols prepared with free fatty acids and without were cured with modified methylene diphenyl diisocyanate to obtain strong, high modulus glassy polyurethanes. The effect of structure on thermal and mechanical properties was analyzed. This showed that the polyol with free fatty acid utilized to obtain a branched structure gave superior crosslinking density and mechanical properties. © 2016 Society of Chemical Industry     

Numerical modelling of calcination reaction mechanism for cement production

Calcination is a thermo-chemical process, widely used in the cement industry, where limestone is converted by thermal decomposition into lime CaO and carbon dioxide CO₂. The focus of this paper is on the implementation and validation of the endothermic calcination reaction mechanism of limestone in a commercial finite volume based CFD code. This code is used to simulate the turbulent flow field, the temperature field, concentrations of the reactants and products, as well as the interaction of particles with the gas phase, by solving the mathematical equations, which govern these processes. For calcination, the effects of temperature, decomposition pressure, diffusion and pore efficiency were taken into account. A simple three-dimensional geometry of a pipe reactor was used for numerical simulations. To verify the accuracy of the modelling approach, the numerical predictions were compared with experimental data, yielding satisfying results and proper trends of physical parameters influencing the process.     

Determination of 200 °C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis,X-ray Diffraction,Hardness and Electrical Conductivity Measurements

Ternary Al-Ag-Ga system at 200 °C was experimentally and thermodynamically assessed. Isothermal section was extrapolated using optimized thermodynamic parameters for constitutive binary systems. Microstructure and phase composition of the selected alloy samples were analyzed using light microscopy, scanning electron microscopy combined with energy-dispersive spectrometry and x-ray powder diffraction technique. The obtained experimental results were found to be in a close agreement with the predicted phase equilibria. Hardness and electrical conductivity of the alloy samples from four vertical sections Al-Ag₈₀Ga₂₀, Al-Ag₆₀Ga₄₀, Ag-Al₈₀Ga₂₀ and Ag-Al₆₀Ga₄₀ of the ternary Al-Ag-Ga system at 200 °C were experimentally determined using Brinell method and eddy current measurements. Additionally, hardness of the individual phases present in the microstructure of the studied alloy samples was determined using Vickers microhardness test. Based on experimentally obtained results, isolines of Brinell hardness and electrical conductivity were calculated for the alloys from isothermal section of the ternary Al-Ag-Ga system at 200 °C.     

Bread and durum wheat compared for antioxidants contents,and lipoxygenase and peroxidase activities

Potential beneficial components, including proteins, total phenolics, total flavonoids, carotenoids, tocopherols, and DPPH radical scavenging activity, were investigated in wholemeal of ten bread (T. aestivum L.) and ten durum (T. durum Desf.) novel wheat genotypes. In addition, the activity rate of lipoxygenase (LOX) and peroxidase (POD) enzymes implicated in the antioxidant metabolism was determined. The protein contnet and the antioxidant properties varied according to the two different wheat species, as well as, between the different bread and durum wheat genotypes themselves. The results indicated significant differences in proteins and antioxidant compounds between bread and durum wheat. Higher total proteins, wet gluten and antioxidants contents, combined with lower LOX and POD activities, point to a higher nutritive value of durum wheat than bread wheat.     

Temperature-dependent kinetics of grape seed phenolic compounds extraction: Experiment and model

The kinetics of a batch solid–liquid extraction of total phenolic compounds (PC) from milled grape seed (Vitis vinifera L. cv. “Frankovka”) using 50% ethanol at different extraction temperatures (25–80 °C) was studied. The maximum yield of PC was 0.13 kg_GAE/kg_db after 200 min of extraction in agitated vessel at 80 °C. A new model based on the assumptions of a first order kinetics mechanism for the solid–liquid extraction and a linear equilibrium at the solid–liquid interface was developed. The model involves the concept of broken and intact cells in order to describe two successive extraction periods: a very fast surface washing process followed by slow diffusion of phenolic compounds from grape seeds to the solvent.The proposed model is suited to fit experimental data and to simulate the extraction of phenolic compounds, which was confirmed by the correlation coefficient (r ? 0.965), the root mean square error (RMSE ? 0.003 kg_GAE/kg_db) and the mean relative deviation modulus (E ? 2.149%). The temperature influenced both equilibrium partition coefficients of phenolic compounds and transport properties, which is manifested by a relatively high value of activation energy (23–24) kJ/mol and by values of effective diffusivity in seed particles.     

Aerodynamic design and analysis of a small-scale vertical axis wind turbine

Small-scale vertical axis wind turbines are regarded today as an attractive source of green energy, still insufficiently implemented and tested. This paper presents a fast design methodology of such a VAWT, in terms of choosing its main parameters: airfoil, rotor diameter and solidity. For obtaining generated power of each considered geometrical model at different undisturbed wind velocities and rotor angular velocities two models were used — momentum and vortex-wake model, combined with experimentally measured airfoil data (airfoil lift and drag coefficients). Even though the former model is simpler, it is the most utilized model, known to provide good results in stationary working regimes. Both models still present fairly accurate and fast tools for computation and optimization, particularly useful in the phase of conceptual design. In this research, the use of the momentum model resulted in determination of the maximal power coefficient, optimal- and minimal freestream velocity for every considered VAWT model. From these output parameters, a selection of the optimal geometric model was done, and a more detailed transient analysis and flow representation around the selected solution was obtained by the vortex-wake model. The results obtained by the two used computational models coincide satisfactorily.