Mechanical behavior of cold-water fish gelatin gels crosslinked with 1,4-butanediol diglycidyl ether

In this work, chemical crosslinking with 1,4-butanediol diglycidyl ether (BDDGE) is used as strategy to enhance mechanical performance of fish gelatin (FG) gels in order to meet the properties' range of mammalian gelatin physical gels. Joint analysis of free amino groups, swelling ratio, and total soluble material indicates that crosslinking degree increases with increasing FG concentration and it is favored by a 0.2 BDDGE/FG ratio. Increasing crosslinking degree enhances gel indentation strength and shear modulus (μ) while decreases fracture toughness (G_IC). Measured μ and G_IC values lies within the range exhibited by mammalian gelatin physical gels, but the relationship between these parameters is opposite. This is due to the different fracture mechanisms occurring in chemically crosslinked and physical gels.     

Static fatigue of Hi-Nicalon™-S fiber at elevated temperature in air,steam, and silicic acid-saturated steam

A facility for testing SiC fiber tows in static fatigue and creep at elevated temperatures in air and steam was developed. Static fatigue of Hi-Nicalon™-S fibers was investigated at 800°C-1100°C at applied stresses between 115 and 1250 MPa in air, in Si(OH)₄(g)-saturated steam, and in unsaturated steam. Fibers tested in Si(OH)₄(g)-saturated steam and in air had silica scales throughout the test sections, but those tested in unsaturated steam did not develop scales near the steam injection point. Fiber lifetimes in static fatigue were shortest in unsaturated steam, intermediate in Si(OH)₄(g)-saturated steam, and longest in air. Failure strains did not exceed 0.3%. Steady-state strain rates and static fatigue lifetimes are modelled empirically by the Monkman-Grant relationship. Failure mechanisms are discussed.     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.     

Influence of Processing Parameters on the Sintering and Electrical Properties of Pb(Zn1/3Nb2/3)O3-Based Ceramics

Pb(Zn_1/3Nb_2/3)O₃-based ceramics have been prepared by two different processing methods: conventional (PZN-C) and reaction-sintering (PZN-RS). The conventionally prepared PZN-based ceramics densified at lower temperatures (950°C) than the reaction-sintered samples (1100°C), but the perovskite/pyrochlore ratio was always higher in PZN-RS. The presence of a substantial amount of pyrochlore phase in PZN-C ceramics caused a decrease in the electrical properties. The maximum dielectric constant values in PZN-C ceramics were 10%–15% lower than those of PZN-RS, despite a similar average grain size, 7 ± 0.2 μm. The temperature of the maximum of the dielectric constant ( T _max) was lower than that expected from the mixing rule because of the possible formation of Ba–Nb clusters. The higher chemical homogeneity in PZN-RS ceramics is the main reason for the higher dielectric constant, T _max and electromechanical response, as well as for the lower difference between T _max and the depolarization temperature ( T _d) and the lower diffusiveness parameter (δ).     

Identification of novel pyranoanthocyanins in berry juices

In most fruit and berry products the attractive red color is unstable and easily susceptible to degradation. The colors of strawberry and raspberry juices can be enhanced and stabilized by the addition of cinnamic acids. The aim of this study was to identify the novel anthocyanin products responsible for the improved juice color. The pyranoanthocyanins formed were detected using high-performance liquid chromatography, and the fractions from this were analyzed using a nano-ESI tandem MS technique. The pyranoanthocyanins identified were formed from reactions of the main anthocyanins of strawberry and raspberry juices with ferulic acid or sinapic acid. The new anthocyanin derivatives were the 4-vinylguaiacol and 4-vinylsyringol adducts of pelargonidin and cyanidin. This is the first time that pelargonidin 3-glucoside-based vinylphenol pyranoanthocyanins and pyranoanthocyanins with more complex sugar residues have been found. This is also the first time pyranoanthocyanins have been detected in strawberry and raspberry juices.     

Application of Matrix Solid-Phase Dispersion and Liquid Chromatography–Ion Trap Mass Spectrometry for the Analysis of Pesticide Residues in Fruits

This study presents an application of rapid and sensitive multiresidue method for the analysis of acephate, acetamipride, atrazine, carbendazim, carbaryl, carbofuran, dimethoate, imidacloprid, linuron, malathion, monocrotophos, monuron, propazine, simazine, and tebufenozide in fruits. The method involves an extraction procedure based on matrix solid-phase dispersion using diatomaceous earth as a dispersant and dichloromethane as the eluent. The target pesticides were determined using liquid chromatography–ion trap mass spectrometry. Quantification of the analytes was carried out using the most sensitive ion transition. Ion trap parameters, like activation q and time, were found to have a prominent influence on method sensitivity for some pesticides and they were optimized accordingly. The confirmation of residues detected in real samples was performed by repeated injection and acquiring additional ion transitions besides the ones used for quantification. The method was validated for accuracy, linearity, reproducibility, and sensitivity. Mean values for recoveries were in the range of 70–120 % for all tested matrices. Repeatability of the method, expressed as the relative standard deviation, was in general lower than 20 %. The applicability of the method to routine analysis was tested in real fruit samples with good performance.     

3rd Ceramic Leadership Summit

The Ceramic Leadership Summit is designed to explore business opportunities, emerging technologies, and critical issues that challenge the ceramic and glass materials community. In 2012, the 3rd Ceramic Leadership Summit was held in conjunction with the 4th International Congress on Ceramics (ICC4). The one‐day program focused on technology transfer, entrepreneurship, and product innovation. Important topics discussed included strategies for creating and sustaining a small business, intellectual property protection, technology transfer, and mechanisms for government–university–industry partnerships. International speakers in the case study session addressed these topics from the perspective of their local and national policies and practices. Several of the case study presentations highlighted the use of “waste materials” in the creation and application of new technologies and products.     

Nanohybrid Materials with Tunable Birefringence via Cation Exchange in Polymer Films

In this work, a nanohybrid material based on a freestanding polymeric liquid crystal network capable of postmodification via cation exchange to tune birefringence is proposed. The smectic liquid crystal films can be infiltrated with a variety of cations, thereby changing the refractive indices (n_e and n_o) and the effective birefringence (Δn) of the nanohybrid material, with reversible cation infiltration occurring within minutes. Birefringence could be tuned between values of 0.06 and 0.19, depending on the cation infiltrated into the network. Upon infiltration, a decrease in the smectic layer spacing is found with layer contraction independent of the induced change in birefringence. Potential applications are in the field of specialty optical devices, such as flexible, retunable reflective filters.