The corrosion behavior of sputter-deposited aluminum-tungsten alloys

Thin films on aluminum-tungsten alloys were prepared by co-deposition of pure aluminum and pure tungsten, each sputtered by an independently controlled magnetron source, on glass and sapphire substrates. Completely amorphous films were obtained in the Al₈₀W₂₀-Al₆₇W₃₃ composition range. Passivity and corrosion behavior of amorphous Al-W alloys were investigated in 1 M deaerated hydrochloric acid solution using polarization and impedance spectroscopy measurements and have been correlated with the properties of pure alloy components. Tungsten and sputter-deposited Al-W thin films are inherently passive materials while aluminum undergoes pitting corrosion in hydrochloric acid solution. The passive film formed at the OCP on each alloy possesses excellent electric and dielectric properties comparable to those of the isolating film on tungsten. The absolute impedance increases with increasing tungsten content in the alloy. According to electrochemical polarization measurements, alloying Al with W in solid solution significantly enhances the material's resistance to pitting corrosion by shifting the breakdown potential above 2000 mV (Al₆₇W₃₃) and lowering the corrosion rate at the OCP by more than two orders of magnitude. The most likely mechanism explaining the passivity of amorphous Al-W alloys, the Solute Vacancy Interaction Model (SVIM), involves the formation of complexes between highly oxidized solute atoms (W⁺⁶) and mobile cation vacancies, which restrict the transport of Cl⁻ through the oxide film and inhibit its breakdown in hydrochloric acid solution. The role that film stress relaxation effects and microscopic defects in amorphous Al-W films, of the some composition, and deposited on various substrates play in their corrosion resistance is discussed.     

Critical Configurations for 1-View in Projections from ℙ<Superscript>k</Superscript> → ℙ<Superscript>2</Superscript>

In this paper we describe, from a theoretical point of view, critical configurations for the projective reconstruction of a set of points, for a single view, i.e. for calibration of a camera, in the case of projections from ℙ^k to ℙ² for k ≥ 4. We give first a general result describing these critical loci in ℙ^k, which, if irreducible, are algebraic varieties of dimension k−2 and degree 3. If k=4 they can be either a smooth ruled surface or a cone and if k = 5 they can be a smooth three dimensional variety, ruled in planes, or a cone. If k≥ 6, the variety is always a cone, the vertex of which has dimension at least k − 6. The reducible cases are studied in Appendix A. These results are then applied to determine explicitly the critical loci for the projections from ℙ^k which arise from the dynamic scenes in ℙ³ considered in [13]. Marina Bertolini is currently Associate Professor of Geometry at the Department of Mathematics at the Università degli Studi di Milano, Italy. Her main field of research is Complex Projective Algebraic Geometry, with particular interest for the classification of projective varieties and for the geometry of Grassmann varieties. On these topics M. Bertolini has published more than twenty reviewed papers on national and international journals. She has been for some years now interested also in applications of Algebraic Geometry to Computer Vision problems. Cristina Turrini is Associate Professor of Geometry at the Department of Mathematics of Università degli Studi di Milano, Italy. Her main research interest is Complex Projective Algebraic Geometry: subvarieties of Grassmannians, special varieties, automorphisms, classification. In the last two years she has started to work on applications of Algebraic Geometry to problems of Computer Vision. She is author or co-author of about thirty reviewed papers. She is also involved in popularization of Mathematics, and on this subject she is co-editor of some books.     

The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

Microwave-Assisted Reaction Sintering of Bismuth Titanate-Based Ceramics

Bismuth titanate-based ceramics, pure and doped with 5 mol% WO₃, were prepared by reaction-sintering using a microwave oven. High densities, ≥96% of theoretical density were achieved with very short thermal treatments, with soaking time ranging from 5 to 15 min. Relatively small platelet-like grains were formed, and microstructure seemed not to be strongly affected by doping nor soaking time. Electrical measurements were performed and, as expected, a decrease of electrical conductivity was observed in WO₃-doped materials. The results of reaction-sintered samples, both conventional as well as microwave sintered, are compared with those of samples prepared with previously calcined powders and sintered using microwaves as well as a conventional electric furnace.     

Metal sorption by biomass of melanin‐producing fungi grown in clay‐containing medium

The sorption of toxic metals by fungal mycelia grown in clay‐containing medium is reported in this work. Biomass of melanin‐producing microfungi of the genus Cladosporium (C cladosporioides, C resinae and C herbarum) and Aureobasidium pullulans, clay minerals and fungal mycelia grown in clay‐containing medium were compared for their equilibrium Cu and Cd uptake from pH‐buffered solutions using experimental sorption isotherms. Bentonite (Cherkassy) in the natural form was shown to be the best Cu sorbent compared with the other clays and clay minerals tested. Cu sorption isotherms fitted the Langmuir sorption model for all cases. Comparison of Cu and Cd uptake for biomass and bentonite showed a lower biomass uptake capacity but a considerably higher affinity of the biosorbent for the solute. The presence of kaolinite and palygorskite in the medium generally reduced both Cu and Cd sorption capacity and the metal‐binding ability of the fungal–clay mixtures. In contrast, addition of bentonite into the medium did not appreciably alter the Cd sorption ability but increased the sorption of Cu by A pullulans and C cladosporioides grown in this medium. A common feature for all fungi grown in the presence of bentonite was an increase in the Cu sorption capacity (Q_max) of the biomineral sorbents and a reduction in their affinity (Langmuir parameter b) compared with control biomass. A difference between predicted and experimental data obtained for biomass grown on bentonite medium was also observed. The connection between the sorption capacity of biomass grown in clay‐containing medium, mycelial morphology and the structure of fungal pellets is discussed and a mechanism for the changed sorption capacity of the combined biomineral sorbents is proposed which involves blocking or modification of binding sites on biotic and abiotic components of the ‘biomineral’ association. © 2002 Society of Chemical Industry     

Performance Evaluation of Packet Mobile Communications through Level Crossing Analysis

In this paper the performance of a packet mobile radio network is studied inthe presence of shadow fading outage intervals.Under quite general assumptions for the medium access protocol,the probability mass function of the sequence of packets that may be lostdue to an outage interval is derived. It is seen that long sequences of lostpackets are likely to occur for typical values of the mobile speed andshadowing correlation parameters.For delay constrained sources, e.g., voice, the analysis is mainly focused atderiving the probability function of the sequence of dropped packetsand the probability of dropping. For data sources, the delay statistic isalso derived. In the latter case, the effect of finite buffer length isaddressed. Simulation is used to verify the accuracy of approximations introduced in the analysis.     

Lyapunov analysis of the approximate motion equations of flexible structures

In this paper, the effectiveness of the approximate motion equations of a flexible structure, obtained by the RitzKantorovich method, is analysed by using Lyapunov functions. The analysis, which is restricted to the case of a single flexible beam for the sake of simplicity, is carried out under the assumption that a partial dissipation is present, affecting only the first degrees of freedom of the system. By means of suitable Lyapunov functions, an overbounding estimate of the quadratic approximation error is determined as a decreasing function of the approximation order. The analysis is completed by considering the two ‘extreme’ cases: the theoretical absence of dissipation and the presence of structural dissipation, affecting all the infinite degrees of freedom.     

Contextual void patching for digital elevation models

Digital terrain models can be created by gathering a set of measurements from geometric objects. For various reasons, these models may be incomplete and thus fail to meet the requirements defined by their potential applications. In this work, we develop a novel multiresolution approach to repair the voids commonly found in digital elevation models (DEM). We use the overall shape and structure of the surrounding terrain to build a smooth patch for the void. Then, using a multiresolution approach obtained from reverse Chaikin subdivision, we extract the low-scale characteristics from the surrounding terrain and apply them to the smooth patch. The results demonstrate that our approach is effective in synthesizing models with realistic characteristics.     

Language disturbances following vascular lesions restricted to the left basal ganglia, thalamus, and white matter.

Examined the relationship between aphasia type and lesion site in 80 subcortical stroke patients. Ss were classified as affected by aphasia, dysarthria, and nonaphasia, nondysarthria. Sites of lesions were identified by means of computerized tomography (CT) scan. No correlation between site of lesions and category group was found. Lesions of the same subcortical structures yielded different neurolinguistic impairment, whereas comparable linguistic patterns were observed with lesions of different deep areas. (PsycINFO Database Record (c) 2010 APA, all rights reserved)