Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

Sulfate attack of concrete building foundations induced by sewage waters

A case history of a severe degradation of concrete foundation plinths and piers of an about-35-year-old building located in Northern Italy is described. Significant amounts of gypsum, near ettringite and/or thaumasite were detected by X-ray diffraction analyses performed on ground concrete samples. Large gypsum crystals were mainly located at the interface between the cement paste and aggregates, as observed by scanning electron microscopy coupled to energy-dispersive spectroscopy microanalysis. The degradation effects increased with decreasing the distance of concrete structures from an absorbing well located in the courtyard of the building. The well was recognized as the sulfate source due to the microorganism metabolism of sulfur compounds present in the sewage. Consequences of this attack were a very poor bond strength between cement paste and aggregates and a severe cracking of the concrete cover of the steel reinforcement.     

Hybrid materials based on metal oxides and poly(organophosphazenes)

In this paper the sol-gel preparation of hybrid materials made of metal oxide and polytorganophosphazenel components is described. The main problem focused on during this research was to avoid phase separation in order to get homogeneous materials. This problem was pursued looking at the formation of genuine chemical bonds between the exploited polyphosphazenes and the inorganic composite networks. Investigations on the thermal, mechanical, and electroconductive properties of the synthesized, phosphazene-containing composite materials showed that these matrices presented improved mechanical and thermal features with respect to those of the original phosphazene macromolecule, while the ionic conductivities of the prepared molecular hybrids doped with lithium or silver trillate are of the same order of magnitude as those measured for the neat, original phosphazene substrate.Presented at the Ist Italian Workshop on Cyclo- and Polytphosphazenel Materials. February 15–16, 1996. at the CNR Research Area in Padova, Italy.     

Runtime home mapping for effective memory resource usage

In tiled Chip Multiprocessors (CMPs) last-level cache (LLC) banks are usually shared but distributed among the tiles. A static mapping of cache blocks to the LLC banks leads to poor efficiency since a block may be mapped away from the tiles actually accessing it. Dynamic policies either rely on the static mapping of blocks to a set of banks (D-NUCA) or rely on the OS to dynamically load pages to statically mapped addresses (first-touch).     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

Removal of fulvic acid from aqueous media by adsorption onto modified vermiculite

Clay minerals are low cost materials that can be structurally modified and exploited for removal of natural organic matter from freshwaters. The present study shows that vermiculites modified by ion exchange with hexadecyltrimethylammonium or intercalation with poly(hydroxy iron) cations are potential adsorbents for removal of fulvic acid, whereas the adsorption on the raw clay mineral is negligible. The efficiency of the modified vermiculite was evaluated by measuring adsorption isotherms by the batch technique using initial fulvic acid concentrations between 2.5 and 50.0 mg L^− 1, with one hour of contact time. At least 94% of the fulvic acid initially present in a 20 mg L^− 1 solution was sorbed onto either the intercalated poly(hydroxy iron) cations or the organically modified vermiculite. Up to an initial concentration of 5.0 mg L^− 1 the adsorption is irreversible, and no quantifiable fulvic acid was measured in the desorption experiments. For initial fulvic acid concentrations between 10.0 and 50.0 mg L^− 1, desorption was between 2.3% and 4.9% for Fe(III) intercalated vermiculite, and between 1.4% and 9.2% for the organoclay. The adsorption percentages on intercalated poly(hydroxy iron) cations increased upon lowering pH and increasing the ionic strength, indicating the occurrence of strong binding mechanisms such as ligand exchange. Adsorption percentage of fulvic acid onto the organoclay also increased with lowering of pH, but in this case the adsorption percentages showed a small decrease at high ionic strength, suggesting that electrostatic attraction plays an important role in the adsorption process.     

Catalyst fragmentation during propylene polymerization: Part I. The effects of grain size and structure

Fragmentation of support/catalyst particles during propylene polymerization in the gas phase is analyzed via a mathematical model including energy and mass transfer with chemical reaction processes. The rupture phenomenon is considered specifically by the model, and evaluated as it proceeds in time, Two different regions are recognized in the polymerizing particle at fragmentation time: an inner core resembling the original solid support/catalyst structure, and an external set of layers where most of the polymerization occurs. Model predictions concerning the effects of fragmentation on polymerization are discussed. The influence of different degrees of fragmentation on thermal runaways and monomer availability at active sites located inside the support/catalyst/polymer complex is shown. Monomer concentration profiles inside the growing particles are explained in terms of the combined fragmentation-polymerization interaction. Results show a strong influence of catalyst structure on critical phenomena during early polymerization stages, and suggest the possibility of controlling critical parameters via the definition of fragment structure at catalyst preparation time.     

A quantitative feedback solution to the multivariable tracking error problem

This paper introduces a novel solution for the multi‐input multi‐output (MIMO) quantitative feedback theory control design problem with tracking error specifications. Looking for a minimum controller overdesign, the technique finds new controller quantitative feedback theory bounds based on necessary and sufficient conditions for the existence of suitable associated prefilter matrix elements. It improves previous approaches to the subject and includes (i) the possibility of a free selection of the nominal plant, (ii) a less conservative application of the Schwartz inequality to decisively reduce the potential controller overdesign, (iii) a methodology to design independently the elements of the prefilter matrix, and (iv) a scope of application to both sequential and nonsequential MIMO controller design methods. The benefits of the new control design technique are illustrated by means of two examples. The first one, a standard 2 × 2 MIMO problem, is provided for comparison purposes with previous approaches. The second example, included as a major control challenge, deals with a well‐known demanding distillation column benchmark problem. Copyright © 2013 John Wiley & Sons, Ltd.     

Metabolic behavior in rats of a nonprotein microemulsion resembling low-density lipoprotein

A protein-free microemulsion (LDE) with a lipid composition resembling that of low-density lipoprotein (LDL) was used in metabolic studies in rats to compare LDE with the native lipoprotein. LDE labeled with radioactive lipids was injected into the bloodstream of male Wistar rats, and plasma kinetics of the labeled lipids were followed on plasma samples collected at regular intervals for 12 h after injection. The 24-h LDE uptake by different tissues was also measured in tissue samples excised after the animals had been sacrificed. We found that LDE plasma kinetics were similar to those described for native LDL [fractional clearance rate (FCR) of cholesteryl ester, 0.42±0.11 h⁻¹]. The major site for LDE uptake was the liver, and the tissue distribution of the LDE injected radioactivity was as one would expect for LDL. To test whether LDE was taken up by the specific LDL receptors, the LDE emulsion was injected into rats treated with 17α-ethinylestradiol, which is known to increase the activity of these receptors; as expected, removal of LDE from the bloodstream increased (FCR=0.90±0.35 h⁻¹). On the other hand, saturation of the receptors that remove remnants by prior infusion of massive amounts of lymph chylomicrons did not change LDE plasma kinetics. These results indicate that LDE is cleared from plasma by B,E receptors and not by the E receptors that remove remnants. Incorporation of free cholesterol into LDE increased LDE plasma clearance. Incubation studies also showed that LDE incorporates a variety of apolipoproteins, including apo E, a ligand for recognition of lipoproteins by specific receptors. Our data suggest that LDE can be a useful tool to test LDL metabolism and B,E receptor function.     

1H nuclear magnetic resonance study of polyurethane prepolymers from toluene diisocyanate and polypropylene glycol

Polyurethane prepolymers prepared from toluene 2,4‐diisocyanate, toluene 2,6‐diisocyanate, and polypropylene glycol with a ratio between the isocyanate and hydroxyl groups equal to 2 were analyzed by ¹H nuclear magnetic resonance (NMR) spectroscopy in acetone‐d₆. Different temperatures and concentrations were used. Toluene 2,4‐dimethylurethane and toluene 2,6‐dimethylurethane were synthesized and used as model compounds to assign prepolymers signals. Measurements of spin–lattice relaxation time T₁ by “inversion recovery” experiments were carried out on toluene 2,4‐diisocyanate, toluene 2,6‐diisocyanate, toluene 2,4‐dimethylurethane, toluene 2,6‐dimethylurethane, and polyurethane prepolymers. Differences in T₁ times were used to interpret prepolymers spectra, by means of the strong observed effect on protons due to the presence of adjacent isocyanate groups. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 347–357, 2003