Impact of Ge-Sb-Te compound engineering on the set operation performance in phase-change memories

The phase-change memory (PCM) technology is considered as one of the most attractive non-volatile memory concepts for next generation data storage. It relies on the ability of a chalcogenide material belonging to the Ge-Sb-Te compound system to reversibly change its phase between two stable states, namely the poly-crystalline low-resistive state and the amorphous high-resistive state, allowing the storage of the logical bit. A careful study of the phase-change material properties in terms of the set operation performance, the program window and the electrical switching parameters as a function of composition is very attractive in order to enlarge the possible PCM application spectrum. Concerning the set performance, a crystallization kinetics based interpretation of the observed behavior measured on different Ge-Sb-Te compounds is provided, allowing a physics-based comprehension of the reset-to-set transition.     

A Hybrid AlGaInAs–Silicon Evanescent Amplifier

We report a hybrid AlGaInAs-silicon evanescent amplifier incorporating a silicon waveguide with a III-V gain medium. The optical mode of the hybrid amplifier is mostly confined to the silicon waveguide and evanescently coupled to the AlGaInAs quantum-well (QW) region where optical gain is provided by electrical current injection. These two different material systems are bonded by low-temperature oxygen plasma assisted wafer bonding at 300 degC. The fabricated device shows 13 dB of maximum chip gain with 11 dBm of output saturation power. Evanescent coupling allows a lower active region confinement factor to provide a higher saturation output power than amplifiers with centered QWs, which is important for applications that require linear amplification     

Effect of mixed solvents on PCDTBT:PC70BM based solar cells

We investigated the effect of solvents on the morphology, charge transport and device performance of poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl C71-butyric acid methyl ester (PC₇₀BM) based solar cells. To carry out this investigation, chloroform and 1,2-dichlorobenzene were chosen as good solvents of the two compounds. Films prepared with chloroform exhibit larger domains than those prepared with 1,2-dichlorobenzene and their size increases with the amount of PC₇₀BM. Fine tuning of the domain size was realized by using a solvent of mixed chloroform and 1,2-dichlorobenzene. At a mixing ratio of 50%:50%, a power conversion efficiency of 6.1% was achieved on PCDTBT:PC₇₀BM (1:3) devices with an active area of 1 cm², under air mass 1.5 global (AM 1.5 G) irradiation at 100 mW/cm².     

A metaheuristic-based downlink power allocation for LTE/LTE-A cellular deployments

The explosive growth of cellular networks makes their deployment and maintenance more and more complex, time consuming, and expensive. Self-Organizing Networks have been recognized as a promising way to alleviate this problem by minimizing human intervention in such processes. This paper introduces a novel multiobjective framework, based on evolutionary optimization, aiming at improving network performance and users Quality of Service. By tuning the transmitted power at each cell, average intercell interference levels are minimized. The design of the proposed scheme is feasible for distributed implementations in Long Term Evolution (LTE) and LTE-Advanced networks and its operation is compatible with current specifications. The framework is able to provide effective network-specific optimization and obtained results show that gains in terms of network capacity and cell edge performance are 5 and 10 %, respectively. Energy savings always accompanied such enhancements with reductions up to 35 %.     

Reduced order model for estimation of fluid flow and flow forces in hydraulic proportional valves

The main objective of this work is to present a methodology for development of reduced order models that can be used to estimate the fluid flow and the flow forces in hydraulic valves, as a function of a reduced number of critical dimensional and material parameters. The methodology is based on classical incompressible flow theory and numerical (CFD) simulations of the fluid flow through the valve.     

On-Demand Multicast Routing Protocol in Multihop Wireless Mobile Networks

An ad hoc network is a dynamically reconfigurable wireless network with no fixed infrastructure or central administration. Each host is mobile and must act as a router. Routing and multicasting protocols in ad hoc networks are faced with the challenge of delivering data to destinations through multihop routes in the presence of node movements and topology changes. This paper presents the On-Demand Multicast Routing Protocol (ODMRP) for wireless mobile ad hoc networks. ODMRP is a mesh-based, rather than a conventional tree-based, multicast scheme and uses a forwarding group concept; only a subset of nodes forwards the multicast packets via scoped flooding. It applies on-demand procedures to dynamically build routes and maintain multicast group membership. ODMRP is well suited for ad hoc wireless networks with mobile hosts where bandwidth is limited, topology changes frequently, and power is constrained. We evaluate ODMRP performance with other multicast protocols proposed for ad hoc networks via extensive and detailed simulation.     

Impact of Business Practices on Individual Energy Consumption

Changing behaviours and attitudes towards more sustainable individual energy consumption is a difficult topic to address. After identifying the most recurrent factors influencing the bad energy consumption, society's environmental short-sightedness, a lack of individual responsibility and a tendency to put responsibility upon firms, institutions, and governments, the authors evaluated the effect that business practices can have on individual behaviour. By qualifying as highly credible sources of information, positioning themselves as examples to follow, and providing its employees with the necessary smart and innovative technology, business communities can have a major impact on changing individual behaviours towards more sustainable energy consumption.