How do designers represent to themselves the users' needs?

This paper reports on an ergonomic study carried out during the design of a cutting machine-tool for the composite material in carbody parts casting. During this design process, the users’ needs were inferred by the designers on the basis of their own mental representations of the use of the new device. These representations of the users’ needs, correct or false, play a decisive role in the choice of a solution. The aim of the study is to identify their particularity. Analyzing the design meetings, we have highlighted that users are considered either as subsystems or basic design principles or elements of an imagined scenario. We have shown that these representations are linked to the types of meetings held during the design process. Accordingly, a diversification of the types of meetings should be promoted by the project leader, so that designers extend their points of view of the operators.     

Continuous relaxation and local maxima selection: conditions for equivalence

Relaxation labeling processes are a class of iterative algorithms for using contextual information to reduce local ambiguities. This paper introduces a new perspective toward relaxation-that of considering it as a process for reordering labels attached to nodes in a graph. This new perspective is used to establish the formal equivalence between relaxation and another widely used algorithm, local maxima selection. The equivalence specifies conditions under which a family of cooperative relaxation algorithms, which generalize the well-known ones, decompose into purely local ones. Since these conditions are also sufficient for guaranteeing the convergence of relaxation processes, they serve as stopping criteria. We feel that equivalences such as these are necessary for the proper application of relaxation and maxima selection in complex speech and vision understanding systems.     

Exploring different technological platforms for supporting co-located collaborative games in the classroom

Computer Supported Collaborative Learning is a pedagogical approach that can be used for deploying educational games in the classroom. However, there is no clear understanding as to which technological platforms are better suited for deploying co-located collaborative games, nor the general affordances that are required. In this work we explore two different technological platforms for developing collaborative games in the classroom: one based on augmented reality technology and the other based on multiple-mice technology. In both cases, the same game was introduced to teach electrostatics and the results were compared experimentally using a real class.     

Cover Picture: Protein Detecting Arrays Based on Cationic Polythiophene–DNA‐Aptamer Complexes (Adv. Mater. 20/2006)

The cover image depicts biochips based on responsive nanoaggregates made from stoichiometric complexes between a cationic polythiophene and an appropriate DNA aptamer. These structures undergo a conformational transition from an unfolded to a folded (G‐quadruplex) structure in the presence of a specific target protein that results in a significant increase of the fluorescence intensity, as reported on p. 2703 by Leclerc and co‐workers.     

Diffusive Behavior of Bedform-Induced Hyporheic Exchange in Rivers

Solute transport in natural streams is a complex phenomenon that involves both in-stream dispersion and mass exchange with the porous zones surrounding the water body. Due to the complex nature of the riverine systems several models may be used to simulate and analyze the transport of solutes with different degrees of complexity. The bedform-induced hyporheic transport is a stream-subsurface exchange mechanism that can be reproduced in controlled systems, such as laboratory flumes. Application of a simple Fickian diffusion model to laboratory data obtained with passive solutes and stationary bedforms proves successful within a range of durations of the contamination process. A dimensionless form of the diffusion coefficient, scaled with dynamic, physical, and geometric properties of the system is derived by comparison with another physically based model. A prediction of the dimensionless diffusion coefficient is obtained as a function of the timescale of the exchange process and is validated with a few sets of results from laboratory tests.     

Deep Drawing of Friction Stir Welded Thin Sheet Aluminium Steel Tailored Hybrids

Friction stir welding undergoes a steep evolution in industrial applications since the invention in the early 1990s. Especially for aluminium alloys in sheet thicknesses over 2 mm a lot of applications are established, whereas a lack in knowledge about friction stir welding of thin sheets with sheet thickness less than 2 mm exists. This article deals with friction stir welding of thin sheet aluminium steel tailored hybrids and their formability. These investigations tend to close the gap of availability of friction stir welded blanks in the range of 1 mm sheet thickness and to offer new applications of this joining technology. For production of aluminium steel tailored hybrids AA5182 with a thickness of 1.2 mm and DC04 in 1.0 mm are used, the joining partners are friction stir welded in a lap joint. Different tool geometries and process parameters are performed to achieve the highest strength and elongation at fracture of the tailored hybrids. The influence of the stirring on the arrangement and distribution of both materials in the welding zone and its microstructure is analysed using light optical and scanning electron microscopy. In addition to tensile tests planar microhardness measurements help to detect the local changes of the mechanical properties in the characteristic zones of the weld seam. Tailored hybrids, which were friction stir welded with the best welding parameters in accordance to the mechanical properties of the weld seams, were used for deep drawing tests of friction stir welded thin sheet aluminium steel tailored hybrids. The maximum drawing ratio of these tailored hybrids coincides with the one of the parent material of AA5182.     

A non-invasive form finding method with application to metal forming

Inverse form finding aims in determining the optimal material configuration of a workpiece for a specific forming process. A gradient- and parameter-free (nodal-based) form finding approach has recently been developed, which can be coupled non-invasively as a black box to arbitrary finite element software. Additionally the algorithm is independent from the constitutive behavior. Consequently, the user has not to struggle with the underlying optimization theory behind. Benchmark tests showed already that the approach works robustly and efficiently. This contribution demonstrates that the optimization algorithm is also applicable to more sophisticated forming processes including orthotropic large strain plasticity, combined hardening and frictional contact. A cup deep drawing process with solid-shell elements and a combined deep drawing and upsetting process to form a functional component with external teeth are investigated.     

Analysis of microbending of CuZn37 brass foils based on strain gradient hardening models

Microbending experiments of brass foils were conducted and demonstrated clear size effects, i.e., the normalized bending moment increased with the reduction of foil thickness. The experiments were modeled using the classical plasticity model and three strain-gradient plasticity models. A modified Nix-Gao model was proposed to consider the number of twins across the thickness direction in strain hardening. It was found that the proposed model could better predict the normalized bending moment for both fine-grain and coarse-grain foils and the proposed equation for material intrinsic length could better capture the physics of material deformation. Furthermore, micro-hardness distributions in the bending area were measured and obvious lower-hardness region was found in the middle layer of fine-grain foils instead of coarse-grain foils. This indicates that the modified Nix-Gao model and the assumption of fully plastic bending worked better for coarse-grain foils than for fine-grain foils.