Modéle complet des circuits à résonateur radial

The purpose of this paper is to present part of a computer aided design model which was developed for the analysis of millimeter wave rectangular waveguide circuits. This paper focuses on cap resonator circuits and pre-tuned modules for Gunn andimpatt oscillators in the W band. The theoretical results were verified through comparisons with experiments performed in the Ku band. The influence of the main cap circuit parameters are analyzed in order to provide a guidance for theptm design.     

Thermal response of steel framing members in open car park fires

For open car park structures, adopting a performance-based structural fire design is often justified and allowed because the fire does not reach flashover. However, this design approach requires an accurate assessment of temperatures in structural members exposed to car fires. This paper describes a numerical study on the thermal exposure on steel framing members in open car park fires. Steel temperatures are computed by the coupling of computational fluid dynamics and finite element modeling, and by analytical models from the Eurocodes. In addition, the influence of galvanization on the steel temperature evolution is assessed. Results show that temperatures in unprotected beams and columns are influenced by the section geometry, car fire scenario, modeling approach, and use of galvanization. Galvanization slightly delays and reduces peak temperature. Regarding the different models, CFD-FEM (CFD: computational fluid dynamics, FEM: finite-element method) coupled models predict lower temperatures than the Hasemi model, because the latter conservatively assumes that the fire flame continuously touches the ceiling. Further, the Hasemi model cannot account for the effect of reduced emissivity from galvanization on the absorbed heat flux. Detailed temperature distributions obtained in the steel members can be used to complete efficient structural fire designs based on the member sections, structure layout, and use of galvanization.     

Two‐phase flow behavior in microtube reactors during biodiesel production from waste cooking oil

Flow patterns in the course of transesterification of waste cooking oil (WCO), sunflower oil (SFO) with water and/or oleic acid as a model of WCO, and pure SFO in the presence of a KOH catalyst in microtubes were investigated. FAME yield for the transesterification of WCO reached more than 89% in the microtube reactors with a residence time of 252 s at 333 K. The flow patterns when using WCO were changed from a liquid–liquid slug flow at the inlet region to a parallel flow at the middle region, and then to a homogeneous liquid flow at the outlet region as the reaction proceeded at 333 K. Fine droplets containing glycerol and methanol generally formed in oil slugs when using pure SFO, but were almost unobservable when using WCO. The soap produced from free fatty acids was considered to be the main factor affecting the flow patterns of WCO and SFO. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Chromatographic Methods for the Determination of Carbohydrates and Organic Acids in Foods of Animal Origin

Carbohydrates are ubiquitous and range from simple monosaccharides to large complex polysaccharides. Organic acids are compounds with acidic properties. Both occur naturally in many foods and in fermented products. Organic acids are usually derived from the hydrolysis of carbohydrates by microorganisms such as lactic acid bacteria. These bacteria convert carbohydrates into energy required for growth, since they are not equipped with the enzymes necessary for respiration and are unable to perform oxidative phosphorylation. Determination of carbohydrates and organic acids in foods of animal origin is important, since they contribute to flavor and texture. Their presence and proportions can affect the chemical and sensory characteristics of a food matrix and they can provide information on nutritional properties of food and the means to optimize selected technological processes. Furthermore, the levels of carbohydrate and organic acid are important to monitor bacterial growth and activity. Actually, these compounds can be quantified by several methods including high‐performance liquid chromatography (HPLC) and gas chromatography (GC). High‐performance liquid chromatography has been widely used to analyze carbohydrates and nonvolatile organic acids, while gas chromatography has been used to determine the volatile organic acids in complex matrices. This contribution provides an overview of chromatographic methods (HPLC and GC) used to analyze carbohydrates and organic acids in foods of animal origin.     

Satellite-based snow identification and its impact on monitoring photovoltaic systems

Earth observation allows the separation of snow cover and cloudiness using multispectral measurements. Several satellite-based snow monitoring services are available, ranging from regional to world-wide scales. Using these data enables photovoltaic (PV) plant management to differentiate between failures due to snow coverage on a PV system and other error sources. Additionally, yield estimates for solar siting are improved. This paper presents a validation study from January to April 2006 comparing satellite-based datasets with ground measurements from German and Swiss meteorological stations. A false alarm rate, an error due to irradiance underestimation, the availability of daily data, and the classification accuracy are introduced as quality metrics. Compared to Switzerland, generally a higher accuracy is found in all datasets for Southern Germany. The most significant difference among the datasets is found in the error pattern shifting from too much snow (which results in an error due to underestimation of irradiance) to too little snow detection, causing a false alarm in PV monitoring.Overall, the data records of the Land Surface Analysis Satellite Application Facility (LSA SAF), the German Aerospace Center (DLR) and the Interactive Multisensor Snow and Ice Mapping System (IMS) are found to be most suitable for solar energy purposes. The IMS dataset has a low false alarm rate (4%) and a good data availability (100%) making it a good choice for power plant monitoring, but the error due to underestimation relevant in site auditing is large with 59%. If a cumulative snow cover algorithm is applied to achieve information every day as needed both for power plant monitoring and site auditing, both the DLR and the LSA SAF datasets are comparable with classification accuracies of 70%, false alarm rates of 37% and 34%, respectively, and errors due to irradiance underestimation in 26% and 27% of all coincidences.     

Development of a roadmap for advanced ceramics: 2010–2025

A roadmap for advanced ceramics for the period from 2010 to 2025 has been developed to provide guidelines for future investments for policy makers, scientists and industry alike. Based on questionnaires, interviews and a final workshop with well-balanced participation of members from industry and academia three roadmaps on application fields and two roadmaps on scientific areas have been developed and contrasted. The three application fields selected are: (i) electronics, information and communication; (ii) energy and environment; (iii) mechanical engineering and the two scientific fields are: (a) structural and functional properties; (b) process technology. Within these fields the tremendous growth opportunities for ceramics as an enabling technology are highlighted and manifold suggestions for future development are provided.     

RTD studies in a falling film graphite evaporator with internal spiral fins: Influence of the geometry

A hydrodynamic study of a new graphite evaporator has been performed. In this exchanger the fluid flows as a thin film on a spirally wound fin which forms a spiral staircase inside a tube. The slope θ_m of the spirally wound fin is modifiable. The residence time distribution (RTD) of the film was measured for different fin slopes θ_m and several film flowrates m_f. The flow pattern was then modelled thanks to the DTS software as a cascade of perfect mixed cells and the mean residence time τ_m was calculated. The evolution of τ_m as a function of θ_m and m_f is accurately represented by a power law relation.     

Taste response to mixtures: Analytic processing of quality.

The tastes of 100 mM sodium chloride (NaCl), 100 mM sucrose, and 1 mM quinine hydrochloride in mixtures were investigated in golden hamsters (Mesocricetus auratus) with a conditioned taste aversion (CTA) paradigm. CTAs, established in golden hamsters by injection of lithium chloride, were quantified as percent suppression of control 1-hr stimulus intake. CTAs for 10 of 15 stimulus pairs with common components symmetrically cross-generalized, suggesting that component qualities were recognized in binary and ternary mixtures. However, CTAs to quinine were hardly learned and were weakly expressed when quinine was mixed with NaCl, and generalizations from multiple to single stimuli were stronger than vice versa (i.e., asymmetric). The behaviors reflect peripheral inhibition and/or central mixture suppression. Nonetheless, components retain their distinct qualities in mixtures, suggesting that taste processing is analytic. (PsycINFO Database Record (c) 2010 APA, all rights reserved)