Anti-Inflammatory Effect of Very High Dose Local Vessel Wall Statin Administration: Poly(L,L-Lactide) Biodegradable Microspheres with Simvastatin for Drug Delivery System (DDS)

Atherosclerosis involves an ongoing inflammatory response of the vascular endothelium and vessel wall of the aorta and vein. The pleiotropic effects of statins have been well described in many in vitro and in vivo studies, but these effects are difficult to achieve in clinical practice due to the low bioavailability of statins and their first-pass metabolism in the liver. The aim of this study was to test a vessel wall local drug delivery system (DDS) using PLA microstructures loaded with simvastatin. Wistar rats were fed high cholesterol chow as a model. The rat vessels were chemically injured by repeated injections of perivascular paclitaxel and 5-fluorouracil. The vessels were then cultured and treated by the injection of several concentrations of poly(L,L-lactide) microparticles loaded with the high local HMG-CoA inhibitor simvastatin (0.58 mg/kg) concentration (SVPLA). Histopathological examinations of the harvested vessels and vital organs after 24 h, 7 days and 4 weeks were performed. Microcirculation in mice as an additional test was performed to demonstrate the safety of this approach. A single dose of SVPLA microspheres with an average diameter of 6.4 μm and a drug concentration equal to 8.1% of particles limited the inflammatory reaction of the endothelium and vessel wall and had no influence on microcirculation in vivo or in vitro. A potent pleiotropic (anti-inflammatory) effect of simvastatin after local SVPLA administration was observed. Moreover, significant concentrations of free simvastatin were observed in the vessel wall (compared to the maximum serum level). In addition, it appeared that simvastatin, once locally administered as SVPLA particles, exerted potent pleiotropic effects on chemically injured vessels and presented anti-inflammatory action. Presumably, this effect was due to the high local concentrations of simvastatin. No local or systemic side effects were observed. This approach could be useful for local simvastatin DDSs when high, local drug concentrations are difficult to obtain, or systemic side effects are present.     

Simulation of transient thermal states in layered electronic microstructures

The analysis of dynamic temperature changes in microelectronic layered circuit (especially made in thick-film technology) has been presented in the paper. Such transient states are caused by electric pulse with high energy and short time of duration. It leads to short but the very violent temperature increase and - as result - defects or parameter changes of active layer. The mathematical function which describes the instantaneous temperature changes was presented in this paper in order to provide more accurate analysis of reliability and thermal properties measurement problems.The two-layer structures (with different thermo-physical properties) were the subject of conducted research, especially one of them, namely heat source excited by electric pulse. Such configuration is typical for microcircuits made in hybrid technology such as LTCC (low temperature co-fired ceramic), HTCC (high temperature co-fired ceramic) as well as thick - film technology in which polymer and photoimageable (photosensitive) materials are used.     

An electron microscopy three‐dimensional characterization of titania nanotubes

To characterize complex, three‐dimensional nanostructures, modern microscopy techniques are needed, such as electron tomography and focused ion beam (FIB) sectioning. The aim of this study was to apply these two techniques to characterize TiO₂ nanotubes in terms of their size, shape, volume, porosity, geometric surface area, and specific surface area (SSA). For these experiments, titania nanotubes were fabricated by means of the electrochemical oxidation of titanium at a voltage of 20 V for 2 hr followed by heat treatment at 450°C for 3 hr to change the amorphous structure into a crystalline anatase structure. The quantitative data obtained from the FIB and electron tomography reconstructions show a high similarity in porosity and some differences in SSA. These might be the result of differences in resolution between the two reconstruction techniques.     

Use of Fourier-Transform Infrared Spectroscopy (FT-IR) for Monitoring Experimental Helicobacter pylori Infection and Related Inflammatory Response in Guinea Pig Model

Infections due to Gram-negative bacteria Helicobacter pylori may result in humans having gastritis, gastric or duodenal ulcer, and even gastric cancer. Investigation of quantitative changes of soluble biomarkers, correlating with H. pylori infection, is a promising tool for monitoring the course of infection and inflammatory response. The aim of this study was to determine, using an experimental model of H. pylori infection in guinea pigs, the specific characteristics of infrared spectra (IR) of sera from H. pylori infected (40) vs. uninfected (20) guinea pigs. The H. pylori status was confirmed by histological, molecular, and serological examination. The IR spectra were measured using a Fourier-transform (FT)-IR spectrometer Spectrum 400 (PerkinElmer) within the range of wavenumbers 3000–750 cm⁻¹ and converted to first derivative spectra. Ten wavenumbers correlated with H. pylori infection, based on the chi-square test, were selected for a K-nearest neighbors (k-NN) algorithm. The wavenumbers correlating with infection were identified in the W2 and W3 windows associated mainly with proteins and in the W4 window related to nucleic acids and hydrocarbons. The k-NN for detection of H. pylori infection has been developed based on chemometric data. Using this model, animals were classified as infected with H. pylori with 100% specificity and 97% sensitivity. To summarize, the IR spectroscopy and k-NN algorithm are useful for monitoring experimental H. pylori infection and related inflammatory response in guinea pig model and may be considered for application in humans.     

Comparison of approaches to the numerical modelling of pure metals solidification using the control volume method

The thermal processes proceeding in the casting-mould system are analysed. Solidification process can be described in the different ways. One of them consists in the application of the Fourier–Kirchhoff equation in which the source function controlling the phase change is introduced. In this paper, two approaches to the modelling of pure metals solidification, i.e. the solidification proceeding at the constant temperature and in the artificially introduced interval of temperature are considered. Numerical model used at the stage of computations is constructed using the Control Volume Method in which the principle of conservation of energy (taking also into account the release of latent heat of solidification) is applied to each control volume ensuring the correctness of the model. The use of Voronoi/Thiessen tessellation to the discretization of the casting-mould system can accurately reproduce the shape of each sub-domain. In the final part of the paper, the examples of computations are shown.     

Creep life assessment method for online monitoring of steam turbine rotors

The principal objective of work was to develop fast and accurate method for online creep life monitoring of steam turbine rotors. For this purpose, a characteristic strain model of creep was investigated and validated using test data of 2%CrMoV rotor steel. The model was then used to determine creep damage functions which are introduced to compute creep damage at a constant temperature based on the Robinson time fraction rule. Finite element (FE) creep calculations of a turbine rotor were performed using the same creep model to obtain reference damage results for validating the proposed method. Comparisons of the results obtained using both methods showed a very good accuracy of the online creep damage predictions.     

A quadratic boundedness approach to a neural network-based simultaneous estimation of actuator and sensor faults

Neural Computing and Applications - The paper is devoted to the problem of a neural network-based robust simultaneous actuator and sensor faults estimator design for the purpose of the fault...     

Single‐lumen tunneled catheter: An old but useful option

We report a case of long‐term uneventful catheter use in a patient with previous recurrent vascular access dysfunction and infection. A single‐lumen tunneled catheter was inserted into the left internal jugular vein after a failed attempt of dual‐lumen permanent catheter placement. The follow‐up since device implantation has exceeded 5 years without any complications related to vascular access.     

Measurement of the average shear rate around a microparticle in the shear thinning medium with laser tweezers

A novel method for the determination of the average shear rate around a microparticle moving in the fluid is presented. Although the shear rate around a particle moving in the fluid is a parameter of paramount importance in sedimentation studies, its determination is time-consuming, thus model-based solutions are preferred. However, the current literature models require still rigorous validation. The presented technique relies on optical tracking of a laser-tweezers trapped particle suspended in the liquid medium. The obtained experimental results for spherical particles of 1 micron diameter show a good agreement with the classical rheology and literature correlation models. The new method is a valuable tool for determination of sedimentation parameters as it reduces the time of experiments and the sample volume by order(s) of magnitude when compared to classical methods.