Coupling of polystyrene to a silane-treated mica

This paper deals with the coupling of polystyrene to a closely packed and highly ordered cationic vinylbenzyl silane (CVBS) on mica. It is shown that a thermal treatment is required for maximum retention of polystyrene on treated mica. Moreover, a thermal treatment at 250°C is much more effective than one at 170°C. The effect of the number of silane monolayers on mica was investigated. In general, one monolayer of CVBS gave optimum retention of polystyrene. The addition of peroxides further improved this retention and at the same time allowed the use of lower treatment temperatures. Some data are presented which consider the importance of the silane solution concentration and silane functional groups.     

Nucleation and Growth of Magnesioferrite in MgO Containing 0.9% Fe3+

The initial stage of precipitation of magnesioferrite from a supersaturated solid solution of 0.9 cation % Fe³⁺ in MgO at 500 °C was studied by fitting the magnetization curves to 7000 Oe at low temperatures with the Brillouin function. The averase umber of Fe³⁺ ions in a precipitate particle, increased monotonically with aging time from 9 in the as-quenched condition to 88 after 16 h. The average spin quantum number per Fe³⁺ ion decreased to near its final value at an aging time corresponding to = 50. Thus the volume fraction of precipitate is near the final value when the average particle size is only about three unit cells of magnesioferrite.     

Selective hydrogenation of soybean oil in the presence of copper catalysts

Many investigators associate the poor keeping properties of soybean oil with its linolenic acid content. On the other hand the high linoleic acid content is a desired property from a nutritional point of view. We have therefore developed a process for the preferential reduction of the linolenic acid content by selective hydrogenation. Conventional catalysts for the hydrogenation of fats have a rather low selectivity in this respect. When linolenic acid in soybean oil is hardened (e.g., with a nickel catalyst), most of the linoleic acid is converted into less unsaturated acids. It was found that linolenic acid is hydrogenated much more preferentially in the presence of copper catalysts than in that of nickel and other hydrogenation catalysts. At a linolenic acid content of 2%, soybean oil hardened with nickel catalyst contained about 28% linoleic acid, whereas with copper catalyst the hardened soybean oil contained 49% linoleic acid. By means of our process it is possible to manufacture a good keepable oil of, e.g., I.V. 115 and containing 1% linolenic acid and 46% linoleic acid. The storage stability of this product is comparable with that of sunflower-seed oil. A liquid phase yield of 86% is obtained after winterization at 5C for 18 hr. The high selectivity for linolenate reduction of copper catalysts must be ascribed to the copper part of the catalyst. Investigations into the structure of the catalyst indicate that the active center consists of copper metal crystallites; whether these centers are promoted by the carrier or traces of other substances is under investigation.     

Fatty acid composition of oils from 21 species of marine fish,freshwater fish and shellfish

The fatty acid composition of body lipids was determined by GLC for 14 species of saltwater fish, three species of freshwater fish and four species of shellfish. In addition, liver lipids of two species and egg lipids of one species were analyzed for comparison with the fish body lipids. The various species ranged from lean to fatty and contained from 0.7~15.5% oil in the tissues. Certain major fatty acids were found to vary widely among the species, as follows: 1.6~8.0% myristic, 9.5~33.4% palmitic, 2.0~11.2% palmitoleic, 5.2~29.1% oleic, 0.7~10.5% eicosenoic, 5.0~21.5% eicosapentaenoic, 0.2~11.6% docosenoic and 5.9~26.2% docosahexaenoic acids. Analyses of two separate mullet-oil samples illustrated the wide differences that are possible for a single species caught during different seasons. Significant differences in the amt of particular fatty acids were found in comparing freshwater-fish analyses with analyses for marine fish. Oysters and scallops showed large amt of pentaenoic and hexaenoic acids in their oils. Presented in part at the AOCS Meeting, New York, 1960.     

Sonic quality control for SP-11-type mullite-corundum stoppers

Refractories and Industrial Ceramics -     

IR Spectroscopic Study of the Organic Component of Ultrafine Diamond Produced by Detonation Synthesis

IR spectra of ultrafine diamonds produced by different teams of researchers are studied. The effects of heating and radiation on the properties of ultrafine diamonds are studied. Quantitative assumptions on the kinetics of formation of ultrafine diamonds are made from analysis of IR spectra.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed