Comparison of different failure criteria for fiber-reinforced plastics in terms of fracture curves for arbitrary stress combinations

For fiber-reinforced plastics exists a big number of different criteria for the failure prediction. The intention of this paper is to compare the TSAI-HIL-, the LaRC04- and PUCK’s criterion in terms of their fracture curves for a unidirectional glass-fiber reinforced composite layer. Therefore after the implementation of these three criteria, the two-dimensional fracture curves for all possible stress combinations, which can be derived from a general spatial stress tensor, are computed. In this way, the characteristics of the criteria, similarities and differences and possible weak points become obvious.     

Characteristics of origin-destination pair traffic in Funet

In this paper we analyze measurements gathered from a 2.5~Gbps link in the Finnish university network (Funet) in 2004. The traffic is broken down into origin-destination (OD) pair components based on source and destination IP address. We study the traffic characteristics of these components, and identify four typical representative OD pairs. For these pairs we investigate the validity of a moving IID Gaussian model. We find that the statistical properties of these OD pairs differ significantly from each other, with only some of them close to Gaussian. The OD pairs are also found to have some cross-correlation between each other, contradicting an often made assumption about OD pair independence. Furthermore, the existence of a mean-variance relation between the OD pairs is studied. We find that there is a relation between mean and variance, but for some periods of time it is rather weak.     

Monomolecular and Bimolecular Recombination of Electron–Hole Pairs at the Interface of a Bilayer Organic Solar Cell

While it has been argued that field‐dependent geminate pair recombination (GR) is important, this process is often disregarded when analyzing the recombination kinetics in bulk heterojunction organic solar cells (OSCs). To differentiate between the contributions of GR and nongeminate recombination (NGR) the authors study bilayer OSCs using either a PCDTBT‐type polymer layer with a thickness from 14 to 66 nm or a 60 nm thick p‐DTS(FBTTh₂)₂ layer as donor material and C₆₀ as acceptor. The authors measure JV‐characteristics as a function of intensity and charge‐extraction‐by‐linearly‐increasing‐voltage‐type hole mobilities. The experiments have been complemented by Monte Carlo simulations. The authors find that fill factor (FF) decreases with increasing donor layer thickness (L_p) even at the lowest light intensities where geminate recombination dominates. The authors interpret this in terms of thickness dependent back diffusion of holes toward their siblings at the donor–acceptor interface that are already beyond the Langevin capture sphere rather than to charge accumulation at the donor–acceptor interface. This effect is absent in the p‐DTS(FBTTh₂)₂ diode in which the hole mobility is by two orders of magnitude higher. At higher light intensities, NGR occurs as evidenced by the evolution of s‐shape of the JV‐curves and the concomitant additional decrease of the FF with increasing layer thickness.     

Polymorph Switching of Calcium Carbonate Crystals by Polymer‐Controlled Crystallization

Polymer‐controlled crystallization of calcium carbonate crystals in solution by a gas diffusion method has been carried out in the presence of poly(sodium 4‐styrene sulfonate‐co‐N‐isopropylacrylamide) (PSS‐co‐PNIPAAM), and for the first time all three anhydrous polymorphs, calcite, vaterite, and aragonite could be selectively produced with a single additive. The selective polymorph synthesis can be nicely adjusted simply by concentration variations of polymer and calcium ions in the present reaction system. The simplicity of the system reveals the influence of Ca²⁺ and polymer concentration on the nucleation and crystal growth of CaCO₃ via the balance between thermodynamic and kinetic reaction control. A single mechanistic framework employing particle mediated as well as ion mediated crystallization for polymorph control is proposed.     

Energy yield prediction errors and uncertainties of different photovoltaic models

Mathematical, empirical, and electrical models have long been implemented and used to predict the energy yield of many photovoltaic (PV) technologies. The purpose of this paper is to compare the annual DC energy yield prediction errors of four models namely the single‐point efficiency, single‐point efficiency with temperature correction, the Photovoltaic for Utility‐Scale Applications (PVUSA), and the one‐diode model, against outdoor measurements for different grid‐connected PV systems in Cyprus over a 4‐year evaluation period. The different models showed a wide variation of prediction errors, demonstrating a strong dependence between model performance and the different technologies. In particular, it was clearly shown that the application of temperature loss correction based on the manufacturer's temperature coefficients of power at maximum power point assisted in improving the energy yield prediction significantly especially for the crystalline silicon (c‐Si) technologies. In most cases, the best agreement between the modeled results and outdoor‐measured annual DC energy yield for mono‐crystalline silicon (mono‐c‐Si) and multi‐crystalline silicon (multi‐c‐Si) technologies was obtained using the one‐diode model. The energy yield for the thin‐film technologies was more accurately predicted using the PVUSA model with the exception of the copper‐indium‐gallium‐diselenide (CIGS) technology, which was best predicted using the single‐point efficiency with temperature correction and one‐diode models, thus demonstrating similar physical properties to c‐Si technologies. The paper further quantifies the combined uncertainties associated with the predicted energy yield as a function of the input parameters for the single‐point efficiency, single‐point efficiency with temperature correction, and the PVUSA models. Copyright © 2011 John Wiley & Sons, Ltd.     

Polylactide‐block‐Polypeptide‐block‐Polylactide Copolymer Nanoparticles with Tunable Cleavage and Controlled Drug Release

A versatile nanoparticle system is presented in which drug release is triggered by enzymatic polymer cleavage, resulting in a physicochemical change of the carrier. The polylactide‐block‐peptide‐block‐polylactide triblock copolymer is generated by initiation of the ring‐opening polymerization of L‐lactide with a complex bifunctional peptide having an enzymatic recognition and cleavage site (Pro‐Leu‐Gly‐Leu‐Ala‐Gly). This triblock copolymer is specifically bisected by matrix metalloproteinase‐2 (MMP‐2), an enzyme overexpressed in tumor tissues. Triblock copolymer nanoparticles formed by nonaqueous emulsion polymerization are readily transferred into aqueous media without aggregation, even in the presence of blood serum. Cleavage of the triblock copolymer leads to a significant decrease of the glass transition temperature (T_g) from 39 °C to 31 °C, likely mediating cargo release under physiological conditions. Selective drug targeting is demonstrated by hampered mitosis and increased cell death resulting from drug release via MMP‐2 specific cleavage of triblock copolymer carrier. On the contrary, nanocarriers having a scrambled (non‐recognizable) peptide sequence do not cause enhanced cytotoxicity, demonstrating the enzyme‐specific cleavage and subsequent drug release. The unique physicochemical properties, cleavage‐dependent cargo release, and tunability of carrier bioactivity by simple peptide exchange highlight the potential of this polymer‐nanoparticle concept as platform for custom‐designed carrier systems.     

Accelerated Ionic Motion in Amorphous Memristor Oxides for Nonvolatile Memories and Neuromorphic Computing

Memristive devices based on mixed ionic–electronic resistive switches have an enormous potential to replace today's transistor‐based memories and Von Neumann computing architectures thanks to their ability for nonvolatile information storage and neuromorphic computing. It still remains unclear however how ionic carriers are propagated in amorphous oxide films at high local electric fields. By using memristive model devices based on LaFeO₃ with either amorphous or epitaxial nanostructures, we engineer the structural local bonding units and increase the oxygen‐ionic diffusion coefficient by one order of magnitude for the amorphous oxide, affecting the resistive switching operation. We show that only devices based on amorphous LaFeO₃ films reveal memristive behavior due to their increased oxygen vacancy concentration. We achieved stable resistive switching with switching times down to microseconds and confirm that it is predominantly the oxygen‐ionic diffusion character and not electronic defect state changes that modulate the resistive switching device response. Ultimately, these results show that the local arrangement of structural bonding units in amorphous perovskite films at room temperature can be used to largely tune the oxygen vacancy (defect) kinetics for resistive switches (memristors) that are both theoretically challenging to predict and promising for future memory and neuromorphic computing applications.     

Application of time resolved emission techniques within the failure analysis flow

As the number of transistors and metal layers increases, traditional fault isolation techniques are less successful in exactly isolating the failing net or transistor to allow physical failure analysis. One tool to minimize the gap between global fault isolation – by means of emission microscopy or laser based techniques (TIVA, OBIRCH) – and physical root cause analysis is Time Resolved Emission (TRE). This paper presents two case studies illustrating the application of TRE within the failure analysis flow to generate a reasonable physical failure hypothesis.     

The European project trust—reconfigurable terminals and supporting networks

To date, research into reconfigurable mobile communications has predominantly focussed on the software radio concept, and specifically on the hardware technologies required to move physical layer processing into a programmable environment [1, 2, 3]. Although an interesting and necessary challenge, this only represents a fraction of the overall support and technology required to realise the potential of the concept. Other necessary developments include network/terminal cooperation for seamless inter-standard handoff, QoS management for software download and reconfiguration, a secure software download mechanism, terminal software and mobile radio network architecture supporting terminal reconfiguration, management for software downloads, configuration management, capability negotiation, radio resource management and spectrum allocation policies etc… This paper describes results from the EuropeanIst Trust (Transparently Reconfigurable UbiquitouS Terminal) [4] project concerning user and operator requirements, the proposed overall system environment, security issues, concerted radio resource management, and expected time frame for the development of reconfigurable terminals.     

Performance evaluation of adaptive routing algorithms in packet‐switched intersatellite link networks

This paper addresses the performance evaluation of adaptive routing algorithms in non‐geostationary packet‐switched satellite communication systems. The dynamic topology of satellite networks and variable traffic load in satellite coverage areas, due to the motion of satellites in their orbit planes, pose stringent requirements to routing algorithms. We have limited the scope of our interest to routing in the intersatellite link (ISL) segment. In order to analyse the applicability of different routing algorithms used in terrestrial networks, and to evaluate the performance of new algorithms designed for satellite networks, we have built a simulation model of a satellite communication system with intersatellite links. In the paper, we present simulation results considering a network‐uniform source/destination distribution model and a uniform source–destination traffic flow, thus showing the inherent routing characteristics of a selected Celestri‐like LEO satellite constellation. The updates of the routing tables are centrally calculated according to the Dijkstra shortest path algorithm. Copyright © 2002 John Wiley & Sons, Ltd.