Experimental studies on the weatherability of the capivara dam basalts,rio paranapanema,brazil

The weatherability of the basalts in the Capivara Dam site, Rio Paranapanema, São Paulo State, Brazil, has been studied by means of saturation-drying tests. A great number of samples have disaggre — gated intensively with production of fines. The behavior of these rocks is related to their petrography, especially to their content in expansive clay minerals. These studies were performed in order to obtain data for the utilization of this material as rock fill, including ripraps.     

On the potential of combining neutron activation analysis and particle induced X-ray emission (PIXE) for micro- and microdistribution analysis of hard metals in human tissues

Tungsten carbide and cobalt are the main components of hard metal alloy while other metals such as chromium, niobium, tantalum, titanium and vanadium are sometimes added in smaller amounts. Exposure to hard metal dusts can induce a lung fibrosis with cobalt playing a major role. In order to provide information on the role that each metal may have in causing this disease, determination of the total content and the distribution of inhaled metals in lung tissue of hard metal workers is of paramount importance. However, samples such as transbronchial biopsy and bronchoalveolar lavage (BAL), often used in the medical diagnosis of pneumoconiosis, only allow for a small amount of material. This calls for sensitive and accurate analytical procedures for microdetermination and distribution of metals in pulmonary tissue and cellular material, such as macrophages. This work proposes a combination of sophisticated analytical techniques such as neutron activation analysis (NAA), currently applied to the determination of the total concentration of more than 30 elements in biological specimens, and PIXE analysis, particularly microPIXE, which has a great potential for microdistribution analysis in small biological samples. Principles and perspectives for the combined use of these techniques for the analysis of human tissue are outlined and discussed. NAA: determination of hard metals in lung tissue are carried out by neutron irradiation (2 × 10¹⁴ neutrons cm⁻² s⁻¹) in the HFR reactor of Petten. After neutron activation, radiochemical separations of ⁶⁰Co, ¹⁸⁷W, ¹⁸²Ta, ⁵¹Cr followed by computer-based high resolution gamma ray spectrometry allow the measurement of these elements in pulmonary tissues with sensitivities ranging from 10⁻⁴ μg (Cr) to 10⁻⁶ μg (W). PIXE: this technique is multielemental and of relatively high sensitivity (μg/g) even in small total sample masses of from 10 to 100 μg, thus allowing the analysis of parts of needle biopsies. Whereas PIXE has been successfully applied to many medical problems, its usefulness is limited in the total samples analysis for cobalt-related hard metal disease, due to the low levels of cobalt in tissue combined with severe element interferences from the generally more abundant metal, iron. Nevertheless, microPIXE, a special variety of the method scanning over the sample with a focussed ion beam of about 2 × 2 μm², could complement the NAA findings in total samples in the sense of achieving a microdistribution analysis of hard metals (including cobalt) in suitable thin tissue sections.The availability of specialized facilities at the JRC such as the powerful HFR reactor (Petten), the NAA laboratories (Ispra) and the microPIXE facility (Geel) could represent a European ‘reference pole’ for the study of metals in tissues of hard metal diseased subjects.     

Gravity driven counterflow through an open door in a sealed room

Flow measurements using tracer gas techniques were made on the exterior doorway of a test house for indoor-outdoor temperature differences of 0.5–45 K. The time for door opening and closing was constant at 3.75 s, and fully open hold time varied from 0.5 s to 120 s. Predictions of a variable density steady flow model were in good agreement with the measurements when adjustments were made for the time-varying size of the opening and for the effect of cross-stream mixing between the incoming and outgoing air streams. The flow rate is shown to be governed by an effective density very close to the average of inflow and outflow densities, and the control condition at the doorway is fixed by the jet-like behavior of the inflow stream. Dependence of cross-stream mixing on interfacial stability caused the orifice and coefficient to increase from 0.4 to 0.6 as temperature difference increased. This varying orifice coefficient is well represented by the combination of a discharge coefficient for streamline contraction combined with a mixing coefficient which accounts for mixing between the inflow and outflow.     

Lead contamination in tap water of households with children in Lower Saxony, Germany

Lead has numerous acute and chronic adverse effects on human beings. This is especially true for infants and children. The main path of lead ingestion in children can be different according to housing and living situation. The intake of lead through drinking water is commonly due to metal corrosion. The users plumbing can be an important factor. In recent years, many lead pipes in Germany have been replaced by pipes made of an alternative material. The aim of this study is to assess the present state of drinking water contamination and the resulting exposure of infants to lead. For this purpose mothers of new-born babies were offered a free examination of their drinking water. After a written declaration of consent had been obtained and after the infant in question had reached an age of 3 months, a stagnation sample of cold tap-water after overnight stagnation together with a random daytime sample was obtained from the family. The collected samples were analysed by atomic absorption spectrometry for their lead concentration. In total, 1485 samples from households were collected. Of the 1434 stagnation samples, 3.1% had lead concentrations greater than 0.01 mg/l (recommended limit of the WHO) and 0.6% had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The values for the 1474 random daytime samples were 2.1% above 0.01 mg/l and 0.2% greater than 0.04 mg/l, respectively. By region, the areas Bovenden, Friedland, Duderstadt, Northeim and Rosdorf were particularly affected. The highest measured concentrations of lead in the stagnation samples were 0.11 mg/l and 0.15 mg/l in the random daytime samples, respectively.     

Object–Oriented Enterprise Modeling and Simulation of AEC Projects

In this paper we describe an object–oriented framework for developing enterprise models of Architecture, Engineering, Construction projects, and a methodology for formalizing these models such that they can be used for discrete event simulation of information processing and coordination in project execution. The simulation results can be used to predict the probable effects of carrying out proposed changes in planning and managing projects.
In our enterprise modeling framework we represent engineering design projects in terms of deliverables (requirements and solutions), plans (activities and process relations), and organization (participants and organizational relations). The resulting project model is the starting point for identifying coordination requirements between project team participants. Our methodology uses matrix techniques derived from qualtiy function deployment (QFD) to identify interactions between project requirements and solutions and calculate measures of product complexity . We then describe information flow between project activities in a similar matrix and calculate measures of process uncertainty . Finally, we identify the responsibilities of project team members and use a matrix to point out organizational interdependencies .
We apply our framework and methodology to model and simulate engineering design for a major extension of an electrical power substation. Our simulation results demonstrate how project performance is contingent on the fit between the project policies and the objectives and preferences of the project team.