Degradation of Stiffness of Cemented Calcareous Soil in Cyclic Triaxial Tests

The deformation characteristics of artificially cemented calcareous soil subjected to undrained cyclic triaxial loading are investigated at different confining pressure and cyclic stress levels. The influence of cementation on the shear stiffness is investigated by comparing the behavior of cemented and uncemented soils with similar initial conditions. It is observed that the deviator stress and the deviatoric strain at yield reduced with increasing number of cycles for cemented sand due to progressive degradation of bond, which results in significant decrease in stiffness. On the other hand, a strain-hardening effect is observed in uncemented sand and this results in increasing yield stress and strain with progressive number of cycles. A linear relationship between degradation index and number of cycles is observed for cemented sand. This relationship has been synthesized in the form of an empirical equation by modifying a previously proposed equation for cohesive soils. This empirical equation was further used to evaluate the fatigue life of soils by adopting a failure criterion.     

Failure of a stationary pump engine piston

Piston failures are not a common occurrence, but they do occur, and failure is usually associated with fatigue crack growth. Most failures initiate at the gudgeon pin hole or in the skirt of the piston. Occasionally they fail elsewhere. In the example covered in this paper, failure initiated in the crown and progressed down to the gudgeon pin before final failure occurred. This paper outlines the cause and mode of failure and shows that small metallurgical discontinuities can contribute to these failures under the right circumstances.     

Delamination Resistant Zinc Alloys: Simple Concept and Results on the System Zinc‐Magnesium

Alloying zinc coatings with elements such as magnesium and titanium increases the corrosion resistance in industrial tests. Based on the fundamental mechanism of cathodic delamination, a simple concept how alloying zinc with specific elements might improve its resistance to cathodic delamination is presented in this paper. As an example, results concerning the delamination of a simple polymer from the zinc‐magnesium intermetallic MgZn₂ are presented. From electrode potential measurements obtained with the Scanning Kelvin Probe it can be concluded that cathodic delamination from this alloy is completely inhibited. This behaviour is attributed to the electronic properties of the magnesium‐rich oxidic passive layer, that inhibits the oxygen reduction reaction at the metal oxide/polymer interface.     

Radiale Wärmeleitung in durchströmten Schüttungsrohren

Heat Transport to the Wall of Packed Tubes. Radial conduction of heat in packed tubes has a crucial influence on yield and selectivity of many heterogeneously catalyzed reactions. In spite of many years of intensive research in the field, there are still tremendous discrepancies between correlations of different origin. Even the standard model using two constant heat transport parameters, which was introduced in the fifties and has since become most widely accepted, has been controversially discussed and called into question. The unsatisfactory state of the art has been an incentive for several groups of researchers to take up this old topic once again. Three parallel experimental investigations on heat transport with air flowing in packed tubes of similar dimensions, electrically heated, steam-heated, or water-cooled, were completed in 1991. Comparative evaluation of the results of these three investigations, together with other data from the relevant literature, now provides the first clear answers to some of the questions so controversially discussed in the past.     

Acidity near eroding polylactide-polyglycolide in vitro and in vivo in rabbit tibial bone chambers

Eroding poly(DL-lactide-co-glycolide)(PDLLG) washers were observed chronically in vitro and in vivo following loading in a bone chamber tibial implant (BCI). Images were recorded using intravital microscopy of the implanted rabbit and direct pH measurements were obtained of the tissue in the bone chamber using a combination probe-reference microelectrode. While statistically significant pH differences were found between the control (unloaded) and experimental (PDLLG-bearing) BCIs, they were only of the order of 0.2 pH units. This value proved to be physiologically insignificant as no statistically significant difference in bone defect healing, as indicated by angiogenesis, was detected. It was shown that the measured small pH changes during PDLLG washers erosion would result whether the buffer was phosphate-buffered saline replaced weekly or interstitial fluid subject to vascular exchanges.     

Dependence of gate oxide breakdown on initial charge trapping under Fowler-Nordheim injection

This work demonstrates that for constant oxide reliability stresses in the Fowler-Nordheim regime a low initial rate of charge trapping/detrapping results in long times to breakdown. It was found for MOS gate oxides that when the initial trapping has been completed at low fields times to breakdown enhance. Depending on the stress sequence measurement results can vary significantly which is of great relevance for correct oxide lifetime predictions.     

L'observation des processus de groupe: difficultés méthodologiques et perspectives.

Discusses problems involved in collecting data based on observation of small groups. The example of a study of manifestations of cooperation in groups of preschoolers (aged 21–57 mo) is used for illustration. Statistical treatment of observation data and global analysis of data are considered. (English abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)