Ignitable Liquid Classification and Identification Using the Summed-Ion Mass Spectrum

Abstract

The mass spectra calculated by summing the intensities of each nominal mass over all chromatographic times, the summed ion spectra, were calculated for a set of 440 commercially available ignitable liquids that had been analyzed by gas chromatography–mass spectrometry. Each ignitable liquid is generally comprised of a mixture of chemicals, and the mixtures may be very complex in some cases, e.g., petroleum distillates, gasoline, etc. The summed ion spectra were evaluated to determine if they contained sufficient information content to allow their use for rapid and accurate identification of the ignitable liquid in a database or library. The summed ion nominal mass spectra were encoded in one bit per channel at 1% transition intensity and a set of 96,580 unique pairwise comparisons were made between spectra, resulting in an average of approximately 50 differing channels per comparison. A subset of 62 summed ion spectra were further compared by a similarity metric and found by cluster analysis to group closely along the ASTM ignitable liquid classification scheme. Receiver operator characteristic analysis of the use of the similarity index in combination with the summed ion spectra was shown to provide 99% probability of correct liquid identification and 95% probability of correct ASTM classification by primary and sub-class. Interlaboratory tests found 95% probability of correct liquid identification and 85% probability of correct ASTM classification at the primary class level. These results demonstrate the use of the summed ion spectrum as a first step in the rapid identification of an ignitable liquid by database or library searching.     

Exploring the impact of software requirements on system-wide goals: a method using satisfaction arguments and i* goal modelling

This paper describes the application of requirements engineering concepts to support the analysis of the impact of new software systems on system-wide goals. Requirements on a new or revised software component of a socio-technical system not only have implications on the goals of the subsystem itself, but they also impact upon the goals of the existing integrated system. In industries such as air traffic management and healthcare, impacts need to be identified and demonstrated in order to assess concerns such as risk, safety, and accuracy. A method called PiLGRIM was developed which integrates means-end relationships within goal modelling with knowledge associated with the application domain. The relationship between domain knowledge and requirements, as described in a satisfaction argument, adds traceability rationale to help determine the impacts of new requirements across a network of heterogeneous actors. We report procedures that human analysts follow to use the concepts of satisfaction arguments in a software tool for i* goal modelling. Results were demonstrated using models and arguments developed in two case studies, each featuring a distinct socio-technical system??a new controlled airspace infringement detection tool for NATS (the UK??s air navigation service provider), and a new version of the UK??s HIV/AIDS patient reporting system. Results provided evidence towards our claims that the conceptual integration of i* and satisfaction arguments is usable and useful to human analysts, and that the PiLGRIM impact analysis procedures and tool support are effective and scalable to model and analyse large and complex socio-technical systems.     

Integrating carrier selection with supplier selection decisions to improve supply chain security

Supply chain security is a major concern for logistics managers who have responsibility for inbound and outbound shipments to and from both domestic and international locations. We propose here that logistics decisions concerning security in the supply chain will be made more effectively when made in concert with decisions in related supply chain processes, especially supplier and carrier selection. Indeed, managers may minimize cost, transit time, and security risk by integrating decision processes internally, as well as with their carrier's and supplier's operations. Thus, we account for both intra‐firm collaboration between logistics and purchasing managers, as well as inter‐firm collaboration among buyers, suppliers, and carriers in a supply chain. In this paper, we propose a decision process that features a set of security rules and a multi‐objective optimization model to accomplish this aim. We then provide an illustration to demonstrate the potential usefulness of these concepts in practice.     

Quantitation by radioimmunoassay of PAF in human saliva

Approximately 75% of the PAF present in saliva is recovered on extraction of whole saliva (0.8 vol) with chloroform/methanol/water (2∶2∶1 v/v/v). PAF levels, determined by our recently developed radioimmunoassay, in saliva extracts ranged from 0.5–21 ng/mL with 59% between 2–6 ng/mL. These figures, for apparently healthy subjects, are higher than previously reported levels obtained by platelet assays. The validity of our radioimmunoassay results was checked by isolating and quantitating the PAF fraction from whole saliva. In addition, when we examined our saliva samples by platelet aggregation, low levels of PAF, comparable with the values found in the literature, were detected. Investigations revealed the presence of a substance(s) which inhibited PAF-induced platelet aggregation but which did not affect the radioimmunoassay.     

Recent Life Events Preceding Suicide Attempts in a Personality Disorder Sample: Findings From the Collaborative Longitudinal Personality Disorders Study.

Few studies have examined the relationship between life events, suicide attempts, and personality disorders (PDs), in spite of the strong associations between PDs and suicidal behavior, and the poor coping strategies often exhibited by these individuals. The authors examined whether participants with PDs who attempted suicide during the first 3 years of a prospective, longitudinal study were more likely to experience specific life events in the month during and preceding the suicide attempt. Of 489 participants with PDs, 61 attempted suicide during the 3-year, follow-up interval. Results indicated that negative life events, particularly those pertaining to love-marriage or crime-legal matters, were significant predictors of suicide attempts, even after controlling for baseline diagnoses of borderline PD, major depressive disorders, substance use disorders, and a history of childhood sexual abuse. Therefore, certain types of negative life events are unique risk factors for imminent suicide attempts among individuals with PDs. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Adolescent Adjustment Before and After HIV-Related Parental Death.

The impact of HIV-related parental death on 414 adolescents was examined over a period of 6 years. The adjustment of bereaved adolescents was compared over 4 time periods relative to parental death and was also compared with the adjustment of nonbereaved adolescents. Bereaved adolescents had significantly more emotional distress, negative life events, and contact with the criminal justice system than nonbereaved youths; these behaviors did not remain significantly higher after parental death. Depressive symptoms and passive problem solving increased soon after parental death, as compared with nonbereaved adolescents. One year subsequent to parental death, depression and passive problem solving were similar to the levels of nonbereaved peers. Only sexual risk behaviors increased following parental death. These results suggest the importance of early family intervention soon after parental HIV diagnosis, prior to parental death, and sustained over time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Task Demands Control Acquisition and Storage of Visual Information.

Attention and working memory limitations set strict limits on visual representations, yet researchers have little appreciation of how these limits constrain the acquisition of information in ongoing visually guided behavior. Subjects performed a brick sorting task in a virtual environment. A change was made to 1 of the features of the brick being held on about 10% of trials. Rates of change detection for feature changes were generally low and depended on the pick-up and put-down relevance of the feature to the sorting task. Subjects' sorting decision suggests that changes may be missed because of a failure to update the changed feature. The authors also explore how hand and eye behavior are coordinated for strategic acquisition and storage of visual information throughout the task. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Pulsed electrodeposition and characterization of molybdenum diselenide thin film

Molybdenum dichalcogenides are semiconductors with layered type structure, which can act as efficient electrodes in the realization of photoelectrochemical solar cells. The main advantage of this molybdenum diselenide (MoSe₂) semiconductor is the prevention of electrolyte corrosion because of the phototransitions involving non-bonding d-d orbital of the Mo atoms. Polycrystalline molybdenum diselenide thin films are prepared by pulsed electrodeposition on conducting glass and titanium substrates in galvanostatic mode from an ammoniacal solution of H₂MoO₄ and SeO₂. The growth kinetics of the film was studied and the deposition parameters such as electrolyte bath concentration, bath temperature, time of deposition, deposition current, pH of the electrolyte and duty cycle of the current are optimized. X-ray diffraction analysis of the as deposited and annealed films showed the presence of highly textured MoSe₂ films with polycrystalline nature. EDAX spectrum of the surface composition confirms the nearly stoichiometric MoSe₂ nature of the film. Surface morphology studies by scanning electron microscope (SEM) shows that the films are pinhole free and of device quality nature. The optical absorption spectra show an indirect band gap value of 1.16 eV. Conductivity measurements were carried out at different temperatures and electrical constants such as activation energy, trapped energy state and barrier height were calculated.     

Quality management metrics for software development

It can be argued that the quality of software management has an effect on the degree of success or failure of a software development program. We have developed a metric for measuring the quality of software management along four dimensions: requirements management, estimation/planning management, people management, and risk management. The quality management metric (QMM) for a software development program manager is a composite score obtained using a questionnaire administered to both the program manager and a sample of his or her peers. The QMM is intended to both characterize the quality of software management and serve as a template for improving software management performance. We administered the questionnaire to measure the performance of managers responsible for large software development programs within the US Department of Defense (DOD). Informal verification and validation of the metric compared the QMM score to an overall program-success score for the entire program; this resulted in a positive correlation.     

The kinking behaviour of a bimaterial interface crack under indentation loading

The aims of this paper are twofold. The first is to evaluate the applicability of the formula for the crack kink angle—based on the maximum principle stress criterion—for predicting the interface kink angle in a bimaterial sample undergoing indentation loading. This formula was developed for cracks in homogenous materials but in this paper, it is used to predict the kink angle using the mode mixity at the tip of a crack lying on a bimaterial interface. The second aim is to examine the behaviour of the system, in terms of the crack kink angle and contact radius, for various coating thickness', crack lengths and combinations of properties of the coating and substrate. The system that is analysed consists of a planar bimaterial sample undergoing indentation with a tungsten-carbide spherical indenter. Two-dimensional, axisymmetric models are created to represent the system, with subdomains used for modelling the cracks. In order to determine the applicability of the kink angle formula, the angle predicted is compared to the angle that is directly calculated using boundary element method models that establish the angle of the kink which yields the maximum mechanical energy release rate. The second aim of the paper is achieved by varying the material property combinations and coating thickness of the bimaterial sample and observing the effect on the kink angle of the interface crack and the contact radius. The methodologies employed are initially verified on homogenous samples with known solutions.