Feldspar/titanium dioxide/chitosan as a biophotocatalyst hybrid for the removal of organic dyes from aquatic phases

Feldspar/titanium dioxide/chitosan hybrid, a photoactive biocompatible adsorbent for anionic dyes, was synthesized, characterized, and successfully tested. The adsorbent characterization, pH role, adsorbent dose effect, equilibrium data, kinetic plats, and thermodynamic parameters are reported. The point of zero charge for the hybrid was measured to be 8.3, and the most favorable pH range for the adsorption process was found to be below this pH value. The adsorption equilibrium study demonstrated that the Freundlich model was best fitted to the experimental data. Without UV light exposure, the prepared adsorbent adsorbed 72 mg of Acid Black 1 (AB1)/g of sorbent (86% removal) from a 100‐mL solution with an initial dye concentration of 50 mg/L, whereas UV irradiation resulted in an increase in the elimination of AB1 dye (97% removal). The kinetic data was depicted well by the pseudo‐second‐order model. The thermodynamic parameters indicated that the reaction between the hybrid and the dye was exothermic and also spontaneous at lower temperatures. In the batch desorption process, several aqueous solutions adjusted to different pH values were tested, and the best desorption performance (90% desorption) was achieved at pH 11. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40247.     

Rheological,crystal structure,barrier, and mechanical properties of PA6 and MXD6 nanocomposite films

In this study, rheological, crystal structure, barrier, and mechanical properties of polyamide 6 (PA6), poly(m‐xylene adipamide) (MXD6) and their in situ polymerized nanocomposites with 4 wt % clay were studied. The extent of intercalation and exfoliation as well as type of crystals, crystallinity, and thermal transitions were investigated using X‐ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. Dynamic rheological measurements revealed that incorporation of nanoclay significantly increases complex viscosity of MXD6 nanocomposites at low frequencies, which was related to the formation of a nanoclay network and exchange reaction between MXD6 chains. The comparative study of dynamic characteristics (G′ (ω) and G″ (ω)) for aliphatic and aromatic polyamide nanocomposites with their neat resins as well as the relaxation spectra for both polymer systems confirmed the possibility of the aforementioned phenomena. Although, the crystallinity of MXD6 films was lower as compared to PA6 films, the permeability to oxygen was more than 5 times better for the former. Incorporating 4 wt% clay enhanced the barrier property, tensile modulus, and yield stress of PA6 and MXD6 nanocomposite films in both machine and transverse directions without sacrificing much puncture and tear resistances. The PA6‐based films showed higher tear and puncture strength as compared to MXD6 films. POLYM. ENG. SCI., 54:2617–2631, 2014. © 2013 Society of Plastics Engineers     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Pan-Cancer Prediction of Cell-Line Drug Sensitivity Using Network-Based Methods

The development of reliable predictive models for individual cancer cell lines to identify an optimal cancer drug is a crucial step to accelerate personalized medicine, but vast differences in cancer cell lines and drug characteristics make it quite challenging to develop predictive models that result in high predictive power and explain the similarity of cell lines or drugs. Our study proposes a novel network-based methodology that breaks the problem into smaller, more interpretable problems to improve the predictive power of anti-cancer drug responses in cell lines. For the drug-sensitivity study, we used the GDSC database for 915 cell lines and 200 drugs. The theory of optimal mass transport was first used to separately cluster cell lines and drugs, using gene-expression profiles and extensive cheminformatic drug features, represented in a form of data networks. To predict cell-line specific drug responses, random forest regression modeling was separately performed for each cell-line drug cluster pair. Post-modeling biological analysis was further performed to identify potential biological correlates associated with drug responses. The network-based clustering method resulted in 30 distinct cell-line drug cluster pairs. Predictive modeling on each cell-line-drug cluster outperformed alternative computational methods in predicting drug responses. We found that among the four drugs top-ranked with respect to prediction performance, three targeted the PI3K/mTOR signaling pathway. Predictive modeling on clustered subsets of cell lines and drugs improved the prediction accuracy of cell-line specific drug responses. Post-modeling analysis identified plausible biological processes associated with drug responses.     

Thermosensitive folic acid-targeted poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl alcohol) hemisuccinate polymeric nanoparticles for delivery of epirubicin to breast cancer cells

A novel thermosensitive folic acid (FA)-targeted succinylated poly (ethylene-co-vinyl alcohol) (EVOH) (EVOHS-FA) nanocarrier was synthesized for the specific delivery of epirubicin (EPI) to MCF-7 breast cancer cell line. Three different ratios of synthesized EVOH-Suc were reacted with FA. The structure of the desired products (EVOHS₄₀-FA, EVOHS₆₀-FA and EVOHS₈₀-FA) was confirmed by ¹H NMR and FTIR techniques. Nanoparticles were obtained by nano-precipitation procedure using DMSO/H₂O as solvent/anti-solvent. The particle size, zeta potential, entrapment efficacy and in vitro release profile of the final formulations in different temperatures were measured. The optimized nanoparticles had the particle size of 214 ± 8.5 nm, zeta potential of ?29.6 mV, PDI of 0.198 ± 0.04, and a high encapsulation efficiency that released the drug efficiently within 450 h at the temperature of 40 °C compared to 37 °C. The morphology of nanoparticles was studied by scanning electron microscopy. The in vitro cytotoxicity was evaluated using the MTT assay on MCF-7 cell lines in response to temperatures of 37 and 40 °C. The MTT assay indicated that the targeted nanoparticles carrying EPI were significantly more cytotoxic than the non-targeted nanoparticles and the free drug at 40 °C.     

Proposal of an equivalent linearization method to predict seismic hysteretic energy demand considering stiffness degradation effects

To overcome complexities and shortcomings of previous studies, a new method is proposed to derive an equivalent linear model for predicting seismic hysteretic energy demand of bilinear single degree of freedom (SDOF) models. A new displacement spectrum is defined, which represents hysteretic energy. It is found that by increasing initial period and damping of a nonlinear system in the correct proportion and defining a linear model with these characteristics, the new developed displacement can be achieved. Error minimization is applied through an algorithm to find the optimum equivalent period corresponding to an equivalent damping utilizing two sets of far‐field and near‐field earthquakes. To analyze the effects of stiffness degradation, the proposed algorithm has been implemented on modified Clough hysteretic model as well. Comparing the results, effects of stiffness degradation on the ratio of equivalent to initial period is evident in the short period range, while with increasing initial period, the effect can almost be neglected at higher values of ductility. Nonlinear regression analysis is carried out to provide the equations for predicting equivalent linear parameters as a function of ductility. Despite the previous predictive equations, the proposed model is independent of earthquake characteristics and response‐related parameters, which has increased efficiency as well as simplicity.     

A comparative study of ethylene polymerization by bis(aminotropone) Ti catalysts

A series of titanium aminotropone complexes bearing a pair of chelating [O–N] ligands have been synthesized and used for polymerization of ethylene successfully. Ethylene polymerization reactions were carried out at different conditions using the prepared catalysts. The activities for ethylene polymerization were significantly dependent on the catalyst structure. The polymerization activity increased with increasing of the both monomer pressure and [MAO]:[Ti] ratio. The highest activity of the catalysts was obtained at about 30–40 °C. It was demonstrated that unlike the high performance Ti–FI catalysts, bis(aminotropone) Ti catalysts do not require the presence of steric bulk in close proximity to the oxygen moiety. Introduction of the bulky alkyl substitution next to the oxygen moiety decreased the activity of the catalysts. Density Functional Theory (DFT) studies reveal that the active species derived from these catalysts normally possess higher electrophilicity nature compared with those produced using bis(phenoxy-imine) Ti catalysts (Ti–FI catalysts). Hydrogen was used as the chain transfer agent. The activities of the catalysts were increased with hydrogen concentration to some extent, but the M _v values of the obtained polymers were decreased. Crystallinity and melting point of the obtained polymer were between 42–62% and 102–124 °C, respectively. Higher pressure increased both the crystallinity and the M _v values of the resulting polymers. The catalyst 8a also produced PE with almost narrow polydispersities (1.10–2.55) as is typical for single-site catalysts. However, PDI was broadened by time.     

CuI Immobilized on Tricationic Ionic Liquid Anchored on Functionalized Magnetic Hydrotalcite (Fe3O4/HT-TIL-CuI) as a Novel,Magnetic and Efficient Nanocatalyst for Ullmann-Type C–N Coupling Reaction

One of the most important reactions in organic synthesis is Ullmann-type C–N coupling reaction which has been used for preparation of numerous biologically active compounds. In this work, CuI immobilized on tricationic ionic liquid anchored on functionalized magnetic hydrotalcite (Fe₃O₄/HT-TIL-CuI) has been successfully prepared and fully characterized by different techniques, including fourier-transform infrared spectroscopy, vibrating sample magnetometer, thermo gravimetric analysis, transmission electron microscopy, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, elemental mapping, zeta potential, X-ray diffraction, temperature programmed desorption of ammonia (NH₃-TPD), temperature-programmed reduction and inductively coupled plasma. The results showed that the as-prepared nanocatalyst possesses plate-like morphology with approximate size of 50 nm and superparamagnetic behavior. Also, total acidity and total hydrogen consumption of the nanocatalyst were measured to be 8.5 and 1.41 mmol g^?1, respectively. This nanocatalyst exhibited favorable performance for C–N coupling reaction among a variety of aryl halides and N(H)-heterocycles (benzimidazoles, pyrazoles and triazoles) in the presence of 2.5 mol% of nanocatalyst without any additives under air atmosphere revealing high yields in all cases. Besides, it is noted that in the present system the desired product can be easily and quickly isolated and nanocatalyst also recovered magnetically from the reaction mixture employing a permanent magnet for at least six consecutive trials without a discernible decrease in catalytic activity which makes the proposed methodology appropriate for industrial. The findings demonstrated the advantages of the present method as no need for neutral atmosphere, appropriate times, recyclability of the catalyst, broad substrate scope, minimization of chemical waste, simple purification of products, easy workup process, and high yields.

     

Hybrid Paper–Plastic Microchip for Flexible and High‐Performance Point‐of‐Care Diagnostics

A low‐cost and easy‐to‐fabricate microchip remains a key challenge for the development of true point‐of‐care (POC) diagnostics. Cellulose paper and plastic are thin, light, flexible, and abundant raw materials, which make them excellent substrates for mass production of POC devices. Herein, a hybrid paper–plastic microchip (PPMC) is developed, which can be used for both single and multiplexed detection of different targets, providing flexibility in the design and fabrication of the microchip. The developed PPMC with printed electronics is evaluated for sensitive and reliable detection of a broad range of targets, such as liver and colon cancer protein biomarkers, intact Zika virus, and human papillomavirus nucleic acid amplicons. The presented approach allows a highly specific detection of the tested targets with detection limits as low as 10² ng mL^?1 for protein biomarkers, 10³ particle per milliliter for virus particles, and 10² copies per microliter for a target nucleic acid. This approach can potentially be considered for the development of inexpensive and stable POC microchip diagnostics and is suitable for the detection of a wide range of microbial infections and cancer biomarkers.