Star-shaped poly(lactic acid) with carboxylic acid terminal groups via poly-condensation

A series of star-shaped poly(lactic acid)s with carboxylic acid terminal groups have been synthesized by direct poly-condensation of lactic acid in the presence of a poly-carboxylic acid core molecule with triphenylphosphonium trifluoromethanesulfonate (TPP-T) catalyst.These star-polymers had thermal properties not very much different from those of star-shaped poly(lactic acid) with hydroxyl terminal groups and linear poly(lactic acid), irrespective of the structure of the core molecule and number of polymer arms. Solubility and degradability of these star-polymers were, however, greatly enhanced compared to those of star-polymers with hydroxyl terminal groups and increased depending on the number of polymer arms. From the star-shaped polymers, a variety of ammonium salts and the corresponding carboxyamides were successfully prepared.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Thermal Decomposition of Titanium Alkoxide and Silicate Ester in Organic Solvent: A New Method for Synthesizing Large-Surface-Area, Silica-Modified Titanium(IV) Oxide of High Thermal Stability

Silica-modified titanium oxide (S-TiO₂) powders that have an anatase structure were synthesized via the thermal decomposition of mixtures of titanium(IV) isopropoxide (TIP) and tetramethyl orthosilicate (TMOS) in toluene at 300°C. These S-TiO₂ materials had high rutile-transformation temperatures and maintained large surface areas at elevated temperatures (550°–1000°C). For example, the product that was prepared from a 9:1 TIP:TMOS mixture transformed to rutile at ∼1100°C and possessed a surface area of 160 m²/g, even after calcination at 800°C for 1 h.     

Effect of packed structure on flow behaviour in a trickle bed biofilter

The effects of operation conditions on the flow behaviour in gas–liquid countercurrent trickle bed biofilter were experimentally examined. In order to prevent gas channelling in the biofilter, packings with a relatively large void fraction, which have a role to maintain a high void fraction in the bed, were added. The gas and liquid velocities of the packed structure and the packings were changed, and the residence time distributions (RTDs) of the gas and liquid were measured. It was found that the addition of void supporters was very effective in the suppression of gas channelling.     

Respiratory symptoms and pulmonary function in coal miners: looking into the effects of simple pneumoconiosis

Most soil quality guidelines do not distinguish among the various forms of metals in soils; insoluble, nonreactive, and nonbioavailable forms are deemed as hazardous as highly soluble, reactive, and toxic forms. The objective of this study was to better understand the long-term effects of copper on microorganisms in relation to its chemical speciation in the soil environment. Carbon mineralization processes and the global structure of different microbial communities (fungi, eubacteria, actinomycetes) are still affected after more than 50 years of copper contamination in 20 soils sampled from two different agricultural sites. The microbial respiration lag period (LP) preceding the beginning of mineralization process increases with the level of soil copper contamination and is not significantly affected by other environmental factors such as soil pH and soil organic matter (SOM) content. The total copper concentration showed the best correlation with the LP when each site is considered separately. However, when considering the whole set of data, soil solution free Cu2+ activity (pCu2+) is the best predictor of Cu toxicity determined by LP (quite likely because pCu2+ integrates the soil physicochemical variability). The maximum mineralization rate (MMR), even if well correlated with the pCu2+, appears not to be a good biomonitor of copper contamination in soils since it is highly sensitive to soil characteristics such as SOM content. This study emphasizes the importance of the physicochemical properties of the environment on soil heavy metal toxicity and on soil toxicological measurements. These properties must be characterized in soil toxicological studies with respect to (1) their interactions with heavy metals, and (2) their direct impact on the selected biological test. The measurement of pCu2+ to characterize the level of soil contamination and of lag period as a bioindicator of metal effects in the soil are recognized as useful tools for the evaluation of the biological quality of soils.     

Diesel emission control system using combined process of nonthermal plasma and exhaust gas components' recirculation

A NO_x aftertreatment system, using nonthermal plasma (NTP) reduction and exhaust gas components' recirculation, is investigated. A pilot-scale system is applied to a stationary diesel engine. In this system, NO_x is first removed by adsorption, and subsequently, the adsorbent is regenerated by thermal desorption. NO_x desorbed is reduced by using nitrogen NTP. Moreover, NO_x, CO₂, and water vapor recirculated into the engine intake reduce NO_x. In this study, approximately 57% of the NO_x of the exhaust (NO_x: 240-325 ppm, flow rate = 300 NL/min) can be continuously treated for 58 h. A system energy efficiency of 120 g (NO₂)/kWh is obtained.     

A flow method with photocatalytic oxidation of dissolved organic matter using a solid-phase (TiO2) reactor followed by amperometric detection of consumed oxygen

A photocatalytic sensor for the determination of chemical oxygen demand (COD) using titanium dioxide, based on the use of a pair of oxygen electrodes and flow injection analysis, is described. The measuring principle is based on the direct determination of the oxygen concentration change resulting from photocataltic oxidation of organic compounds. One of the two oxygen electrodes, the reference oxygen electrode, was utilized to measure the reference signal responding only to oxygen present in the injected samples. Oxygen consumption due to the TiO2-catalyzed photochemical oxidation of organic compounds in samples was monitored with the working oxygen electrode. The COD value of this sensor was calculated as the difference of the currents at reference and working oxygen electrodes, respectively. The operation characteristics of the sensor are demonstrated using artificially treated wastewater as a substrate. The sensor was also applied to the determination of COD in real water samples from dam reservoirs (n = 20) all over Japan. The results were in good agreement with those from the conventional COD methods (i.e., permanganate and dichromate methods).     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.     

Optimizing dock configuration and staffing in decentralized receiving

In manufacturing facilities, shipping and receiving traditionally have been concentrated in one or two areas of the building. The widespread introduction of just-in-time shipping policies in US manufacturing companies during the past 15 years, as well as the common use of decentralized receiving in the Japanese automobile industry, has motivated the consideration (and occasionally the adoption) of dock configurations to support decentralized receiving (also known as perimeter receiving). By providing multiple access points along the perimeter of the building, decentralized receiving generally reduces the time and cost associated with moving purchased parts to the locations within the facility where they are used, but also results in increased cost of construction, maintenance, and operation for docks and associated truck access/egress, as well as additional interior floorspace requirements. We develop an optimization-based procedure to determine which of several possible dock areas to construct, how many doors or gates each should have, how many unloading and internal material handling staff should be assigned to each group, and which inbound materials each group should handle. We consider the amortized cost of constructing and equipping the docks, the amortized cost of material handling equipment to support the unloaders and material handlers, the cost of operating the material handling equipment, and labor costs for both unloading and internal material handling.