Strong correlations in two-dimensional quantum fluids of4He and3He adsorbed on hectorite

A theory for the high temperature superconductors is proposed. The dispersion of carriers in the 2D t-J model is calculated using numerical and analytical techniques, and compared with recent photoemission experimental results that reported a flat dispersion near the X and Y points. Good agreement is observed between theory and experiments. The density of states (DOS) of these dressed quasiparticles has a van Hove singularity. From the two carriers problem in an antiferromagnet, an effective Hamiltonian for holes is proposed. This effective model has superconductivity in the d_x ²–y² channel, a critical temperature T_c 100Kat the optimal hole density, x = 0.15, and a quasiparticle lifetime linearly dependent with energy. The appearance of an optimal concentration is a consequence of the van Hove singularity in the DOS. Other experimental results are also quantitatively reproduced by the theory. The present contribution is based on two recent papers by the authors (Phys. Rev. Lett.73, 728 (1994) and NHMFL preprint, July 1994).     

Methanation of CO2 with the oxygen-deficient Ni(II)-ferrite under dynamic conditions

The continuous methanation of CO₂ has been accomplished over hydrogen-reduced Ni(II)-bearing ferrite (Ni_xFe_3–xO_4–; x=0.39, > 0) in a mixed gas flow of CO₂ and H₂ at 250–375 °C. The yield and the selectivity for the methanation were larger than 50% and 95%, respectively, at the initial stage of the process. They decreased to 31% and 89%, respectively, after 6 h methanation. The innovative results can be ascribed to the use of the new material; hydrogen-reduced Ni(II)-bearing ferrite. Its formation was evinced by chemical analyses and the increase in the lattice constant; the lattice constant of the Ni(II)-bearing ferrite (a₀ 0.8375 nm) was enlarged to 0.8379 nm by hydrogen reduction. The enlarged lattice constant was not changed during the methanation. These findings suggest that the methanation occurs at the oxygen-deficient site of the hydrogen-reduced Ni(II)-bearing ferrite, as well as the formation of water by combination of the incorporated oxygens with hydrogen. The methanation consists of three steps of the elementary reaction. First, the oxygen-deficient sites are formed by hydrogen reduction; second, CO₂ is reduced to elementary carbon and two oxygen ions which are incorporated into the oxygen-deficient sites; and third, the carbon deposited on the surface of the reduced ferrite is selectively hydrogenated to CH₄.     

Disposition of diadenosine 5',5"'-P1,P4-tetraphosphate (Ap4A) in rats

The disposition of diadenosine 5'5"'-P1,P4-tetraphosphate (Ap4A), an endogenous dinucleotide, was investigated in rats. The degradation of Ap4A in rat plasma was very rapid and could be explained by a Michaelis-Menten equation: Km and Vmax values were 1.69 micrograms/ml and 4.32 micrograms/min/ml, respectively. Ap4A was degraded in rat plasma to ATP and AMP, but not to 2 ADP molecules, and these nucleotides were further degraded through adenosine. The degradations kinetics were examined. After intravenous bolus injection, Ap4A in plasma declined rapidly and the rate of elimination was dose-dependent: the biological half-life was about 3s at the dose of 1 mg/kg and was longer at 3 mg/kg. When Ap4A was administered by intravenous infusion (0.5 or 1.0 mg/kg/min), the plasma level rapidly reached a steady-state, which then rapidly declined after stopping the infusion.     

Active sensing control improving SLAM accuracy for a vehicle robot

Artificial Life and Robotics - This study considers an autonomous mobile vehicle using SLAM technology in an unknown environment. The focused problem is the decrease of trajectory following...     

Rational Filters for Passive Depth from Defocus

A fundamental problem in depth from defocus is the measurement of relative defocus between images. The performance of previously proposed focus operators are inevitably sensitive to the frequency spectra of local scene textures. As a result, focus operators such as the Laplacian of Gaussian result in poor depth estimates. An alternative is to use large filter banks that densely sample the frequency space. Though this approach can result in better depth accuracy, it sacrifices the computational efficiency that depth from defocus offers over stereo and structure from motion. We propose a class of broadband operators that, when used together, provide invariance to scene texture and produce accurate and dense depth maps. Since the operators are broadband, a small number of them are sufficient for depth estimation of scenes with complex textural properties. In addition, a depth confidence measure is derived that can be computed from the outputs of the operators. This confidence measure permits further refinement of computed depth maps. Experiments are conducted on both synthetic and real scenes to evaluate the performance of the proposed operators. The depth detection gain error is less than 1%, irrespective of texture frequency. Depth accuracy is found to be 0.51.2% of the distance of the object from the imaging optics.     

Effect of poly(acrylic acid) on the preparation of thick silica films by electrophoretic sol–gel deposition of re-dispersed silica particles

Thick silica films were prepared by the electrophoretic sol–gel deposition technique in the presence of poly(acrylic acid) (PAA) using monodispersed silica particles; the particles were prepared by the sol–gel method, pre-heat treated and then re-dispersed in the mixture of H2O and ethanol. The weight of deposited silica films was maximized when 0.2 mass % of PAA against the whole amount of sol was added. The particles constructing the thick silica films were packed densely when the amount of added PAA was less than 0.2 mass%. The weight of the film increased with decrease in the content of H2O in the sol when a fixed amount of PAA was added. After the heat treatment of deposited films at 800 °C, crack-free silica films of about 30 m thickness were prepared. © 1998 Chapman & Hall     

Synchronization of pulsed Tksapphire lasers and its application to difference frequency mixing for tunable infrared generation

A simple and effective technique for synchronizing two independent Ti: sapphire lasers was developed and used for difference-frequency generation. By control of pump intensity, buildup times of these lasers were adjusted to coincide for any combination of wavelengths that was needed for the production of a desired difference frequency. Synchronized pulses were mixed at a AgGaS(2) crystal, producing infrared pulses from 6.2 to 9.7 μm. Characteristic features of the method as well as its possible extension of the tuning range are discussed.     

Soft magnetic properties of NiFeTa thin films for biasing film applications in magnetoresistive elements

The effects of Ta addition on the magnetic properties of permalloy thin films have been investigated. The alloy compositions on a weight basis are (Ni₈₁Fe₁₉)_1-x Ta _x with 0 x 0.105, and the films are sputtered onto a glass substrate at between room temperature and 300 C. The saturation magnetization and anisotropic magnetic field decrease with increasing Ta content. The saturation magnetization is 0.75 T at 5 wt % Ta. The coercivity remains constant at 125 Am^-1. The electrical resistivity increases linearly with increasing Ta content, then saturates at approximately 7.5 wt% Ta. The saturation resistivity is approximately 1.00 m. The magnetoresistivity ratio (/) decreases with increasing Ta content, mainly due to increased electrical resistivity (). The magnetostriction changes from negative to positive with increasing Ta content and reaches nearly zero at 2 wt% Ta. The NiFeTa films containing 5–6 wt% Ta have potential for use as the soft-biasing film in magnetoresistive elements.