Breaking Ability and Interrupting Phenomena of a Circuit Breaker Equipped with a Parallel Resistor or Capacitor

This paper discusses the breaking ability of an air blast circuit breaker (ABB) or SF6 gas circuit breaker (GCB), and the interrupting phenomena around current zero in the case where a resistor or capacitor is connected in parallel with its interrupter to improve the breaking ability. It has been clarified that the use of a parallel resistor for ABB, and that of a parallel capacitor for GCB are the most effective methods to improve the breaking abilities; the parallel resistor not only serves to reduce the rate of rise of the transient recovery voltage (rrrV), but also shifts the current from the interrupter to itself around the current zero, thus reducing the stress for interruption. The improvement of the breaking ability is achieved by reducing the initial average rrrV between zero and 1 microseconds (inherent value), when the parallel capacitor is used with the GCB.     

Random-coiled conformation of polypeptide chains

Summary Random-coiled conformation of poly(L-leucine), which has -branched side-chain, was theoretically analyzed by a conformational energy calculation based on intra-residue interactions. Calculated characteristic ratio 7.62 was obtained by using the transformation matrix statistically averaged over the entire side-chain conformational space of L-Leu residue. This value is smaller than those of poly(L-phenylalanine) (11.24) and poly(L-tyrosine) (12.33) which have -branched side-chain.     

Dendrimer-immobilized culture surface as a tool to evaluate formation of cellular cytoskeleton of anchorage-dependent cells

Anchorage-dependent cultivation of human epithelial and keratinocyte cells was carried out on surfaces modified with synthesized dendrimers. Notable elongation of the epithelial cells was recognized on the culture surface immobilized with a dendrimer having D-glucose as a functional ligand, but not when a dendrimer having L-glucose was used or when the dendrimer was ligand-free. This morphological change was attributable to a temporary grasping of the cells at the D-glucose moiety via a glucose transporter-mediated mechanism present in the cell membrane. Following visualization of the actin filaments of the cells, it was considered that the cellular elongation on the D-glucose-bound dendrimer surface reflected the degree of formation of the cellular cytoskeleton. The cellular roundness was calculated by means of image analysis of the individual cells and employed as a parameter to evaluate the formation of the cellular cytoskeleton. In the culture of keratinocytes on the D-glucose-bound dendrimer surface, it was demonstrated that the decrease in the ratio of elongated cells (i.e., cells with a low roundness value) was correlated with the deterioration in the growth potential associated with cellular senescence.     

Bioconversion of n−3 and n−6 PUFA by <Emphasis Type="Italic">Clavibacter</Emphasis> sp. ALA2

Clavibacter sp. ALA2 oxidized n−3 and n−6 PUFA into a variety of oxylipins. Structures of products converted from EPA and DHA were determined as 15,18-dihydroxy-14,17-epoxy-5(Z),8(Z),11(Z)-eicosatrienoic acid and 17,20-dihydroxy-16,19-epoxy-4(Z),7(Z),10(Z),13(Z)-docosatetraenoic acid by GC-MS and NMR analyses. In contrast, γ-linolenic acid and arachidonic acid were converted to diepoxy bicyclic FA, tetrahydrofuranyl monohydroxy FA, and trihydroxy FA. Thus, the structures of bioconversion products were different between n−3 and n−6 PUFA. Furthermore, strain ALA2 placed hydroxy groups and cyclic structures at the same position from the ω-terminal despite the number of carbons in the chain and the double bonds in the PUFA.     

Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

Spectral interferometric microscope with tandem liquid-crystal Fabry-Perot interferometers for extension of the dynamic range in three-dimensional step-height measurement

The maximum measurable range of a spectral interference microscope depends on the coherence length of the light transmitted by its tunable spectral filter. To achieve a large range in step-height measurement we have developed a new tunable spectral filter that uses tandem liquid-crystal Fabry-Perot interferometers (LC-FPIs), which can simultaneously attain both a high spectral resolution and a large tuning range. Fringe visibility measurements were carried out, and it was found that the coherence length of the light transmitted through tandem LC-FPIs is two times larger than that transmitted through a single LC-FPI. Using this novel tunable spectral filter, we developed a new spectral interference microscope for the measurement of three-dimensional shapes of discontinuous objects. Experimental results of step-height measurements both with a single LC-FPI and with tandem LC-FPIs are presented for a combination of standard steel gauge block sets with 1-, 99-, and 100-microm steps. A large range (1-100 microm) of measurement with submicrometer resolution was achieved with tandem LC-FPIs that was not possible with our previous system in which a single LC-FPI was used.     

A spherical aberration-corrected 200 kV TEM

A spherical aberration (Cs)-corrected 200 kV TEM was newly developed. The column of the microscope was extended by 25 cm and the inner yoke of the objective lens was modified to insert some parts of the corrector elements. The corrector has two hexapole elements that play a main role in Cs correction and they are placed at a position equivalent to the coma-free point of the objective lens by using two transfer doublet lenses. The Cs correction was successfully carried out by means of the third-order aberration that was generated in the two extended hexapoles. The Cs can be corrected to the desired value and also can be overcompensated in order to produce a negative Cs, as with the corrected Cs of -23 microm shown in this work. The optical system of the corrector does not produce second- and fourth-order aberrations, and can correct residual aberrations up to the third order. All of the corrector elements are computer-controlled and the third-order aberrations are quite stable after they are properly corrected. The resolution of 0.135 nm was experimentally confirmed by the Young's fringe method. Image simulations of a silicon [110] single crystal were made with various Cs and defocus values to demonstrate the effectiveness of arbitral control of Cs.     

Pore-scale visualization of gas trapping in porous media by X-ray CT scanning

Entrapment of the non-wetting phase in porous media has been observed in a variety of fields such as petroleum engineering, geological storage of carbon dioxide, and remediation of ground water. We investigated gas trapping in porous media from a microscopic point of view. High-resolution, three-dimensional images of pore structure and trapped gas bubbles in Berea sandstones were obtained using a micro-focused X-ray CT scanner. We used vertical and horizontal Berea sandstone cores, 8 mm in diameter and 15 mm long. Based on the three-dimensional image analysis, the statistical distribution of the trapped gas volume was estimated. Trapped bubbles have a pore-network scale size and distribute over several pores. In the case of the vertical core, the porosity fluctuates along the flow direction due to the layered structure. The residual gas saturation also fluctuates with porosity along the flow direction. The higher gas saturation in porous layers at the end of gas injection results in a higher trapped gas saturation compared to dense layers. On the other hand, in dense layers the gas saturation at the end of gas injection is almost the same as residual gas saturation. Therefore, most of the gas injected into the dense layers would be trapped. In the case of the horizontal core, the gas saturation at the irreducible water condition is lower than that for the vertical core, because the injected gas selectively passes through the more permeable layers. However, the residual gas saturation is 29.2% for the horizontal core, which is comparable with that for the vertical core (30.9%). Finally, the effect of capillary number on stability of trapped gas bubbles has been estimated. Trapped gas bubbles are stable against the increased flow rate up to a capillary number of 1.0×10^?5.     

High-temperature pyrolysis of ceramic fibers derived from polycarbosilane–polymethylhydrosiloxane polymer blends with porous structures

The polymer blends of PCS (polycarbosilane) and PMHS-h (polymethylohydrosiloxane with high molecular weight) were prepared by freeze-drying process of mixed benzene solution. Melt viscosity, mass loss, and gas evolution from prepared polymer blends were analyzed. A polymer blend of HSah15 (15 mass% PMHS-h to PCS) was melt-spun to fiber form, curing by thermal oxidation and pyrolyzed at various temperatures up to 1773 K. The obtained fibers were investigated by tensile tests, FE-SEM (field emission scanning electron microscope) observation, and XRD (X-ray diffraction) analysis. After pyrolysis at 1273 K, there were no pores in the cross section of the fiber derived from pure PCS; however, there were amounts of pores in the cross sections of the fiber derived from HSah15. After pyrolysis at 1773 K, the coarse β-SiC (silicon carbide) crystals were formed on the outside surface of the fiber derived from pure PCS; however, no remarkable β-SiC crystal were formed on the outside surface of the fiber derived from HSah15.     

Structure Analysis of Molten Ba–Ge Alloys Using Electrostatic Levitation Technique Combined With High-Energy X-Ray Diffraction

High-energy synchrotron X-ray diffraction experiments were performed for clathrate-forming barium–germanium (Ba–Ge) alloys in the liquid state near the eutectic composition. The accurate structure information of highly reactive melts has been obtained by applying electrostatic levitation technique as a containerless method. The structure information obtained from the reverse Monte Carlo simulation suggests that the short-range ordering between the Ge atoms occurs with the addition of Ba atoms in the liquid Ba–Ge alloys. This can be associated with the formation of the cage-like structure composed of the Ge atoms in the liquid alloys near the eutectic composition.