Principal decomposition by-products generated at variousabnormalities in gas-insulated transformers

Gas analysis provides a promising means for a diagnosis of gas-insulated equipment. Although many studies have been concentrated on SF₆ gas decomposition, they were mostly related to the faults in GIS systems and not directly applicable to gas-insulated transformers, which have much more complicated material structure. An experimental survey on decomposition by-products at various abnormal conditions was carried out by use of simulation models to develop a diagnostic method for gas-insulated transformers based on gas and ion chromatograph analyses. Major components characteristic in each abnormality, such as SO₂ on metal overheat, SO₂F ₂ on partial discharges, etc. were identified by the experiments     

Identifying rotation and oscillation in surface tension measurement using an oscillating droplet method

We proposed a new approach to identify the frequencies of droplet rotation and m=±2 oscillation that degrade the accuracy of surface tension measurement by an oscillating droplet method. Frequencies of droplet rotation and m=±2 oscillation can be identified by a phase unwrapping analysis of time dependence of the deflection angle for the maximum diameter of the droplet image observed from above. The present method was validated, using test data with given frequencies. © 2008 Wiley Periodicals, Inc. Heat Trans Asian Res, 37(7): 421–430, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20214     

Detection of enzymatically generated hydrogen peroxide by metal-based fluorescent probe

We developed a metal-based fluorescent probe for H(2)O(2) called MBFh1, which has an iron complex as a reaction site for H(2)O(2) and a 3,7-dihydroxyphenoxazine derivative as the fluorescent reporter unit. The iron complex reacts quickly with H(2)O(2) to form oxidants, and then the oxidants convert the closely appended nonfluorescent 3,7-dihydroxyphenoxazine moiety to resorufin in an intramolecular fashion. The quick response to H(2)O(2) allows us to plot the enzymatic evolution of H(2)O(2). A combination of N-acetyl-3,7-dihydroxyphenoxazine and horseradish peroxidase has been frequently used to detect enzymatically generated H(2)O(2), but this method has interference with phenol derivatives. The use of MBFh1 overcomes this drawback.     

Microfluidic device with chemical gradient for single-cell cytotoxicity assays

Here, we report the fabrication of a chemical gradient microfluidic device for single-cell cytotoxicity assays. This device consists of a microfluidic chemical gradient generator and a microcavity array that enables entrapment of cells with high efficiency at 88 ± 6% of the loaded cells. A 2-fold logarithmic chemical gradient generator that is capable of generating a serial 2-fold gradient was designed and then integrated with the microcavity array. High density single-cell entrapment was demonstrated in the device without cell damage, which was performed in 30 s. Finally, we validated the feasibility of this device to perform cytotoxicity assays by exposing cells to potassium cyanide (0-100 μM KCN). The device captured images of 4000 single cells affected by 6 concentrations of KCN and determined cell viability by counting the effected cells. Image scanning of the microcavity array was completed within 10 min using a 10× objective lens and a motorized stage. Aligning cells on the microcavity array eases cell counting, observation, imaging, and evaluation of singular cells. Thus, this platform was able to determine the cytotoxicity of chemicals at a single-cell level, as well as trace the cytotoxicity over time. This device and method will be useful for cytotoxicity analysis and basic biomedical research.     

Results of antireflux surgery in infants with vesicoureteral reflux

The mechanism underlying the reduced Cu status in rats fed on a high-sulphide diet was investigated. Male rats aged 6 weeks were fed ad libitum on purified diets containing either 0 or 500 mg S2-/kg and demineralized water for a period of 2 weeks. The high-sulphide diet had no effect on feed intake, body-weight gain or weight of liver and kidney but significantly reduced Cu concentrations in plasma and kidney. Biliary Cu excretion was decreased significantly in rats fed on the high-sulphide diet. Apparent Cu absorption (Cu intake-faecal Cu) and true Cu absorption (Cu intake-(faecal Cu-biliary Cu)) were significantly lowered after sulphide feeding for 2 weeks. Rats fed on the high-sulphide diet excreted less Cu in urine than did the controls. We conclude that high sulphide intake reduces Cu status in rats through inhibition of Cu absorption which is reflected by a decrease in biliary Cu excretion as a secondary feature.     

A 14-ns 14-Mb CMOS DRAM with 300-mW active power

A 4-Mb high-speed DRAM (HSDRAM) has been developed and fabricated by using 0.7-μm L_eff CMOS technology with PMOS arrays inside n-type wells and p-type substrate plate trench cells. The 13.18-mm×6.38-mm chip, organized as either 512 K word×8 b or 1 M word×4 b, achieves a nominal random-access time of 14 ns and a nominal column-access time of 7 ns, with a 3.6-V V_cc and provision of address multiplexing. The high level of performance is achieved by using a short-signal-path architecture with center bonding pads and a pulsed sensing scheme with a limited bit-line swing. A fast word-line boosting scheme and a two-stage word-line delay monitor provide fast word-line transition and detection. A new data output circuit, which interfaces a 3.6-V V_cc to a 5-V bus with an NMOS-only driver, also contributes to the fast access speed by means of a preconditioning scheme and boosting scheme. Limiting the bit-line voltage swing for bit-line sensing results in a low power dissipation of 300 mW for a 60-ns cycle time     

Continuous versus bilevel positive airway pressure in a patient with idiopathic central sleep apnea

A 57-yr-old man with idiopathic central apnea is reported. He presented at our hospital complaining of excessive daytime sleepiness. Polysomnography, including esophageal pressure monitoring, confirmed central sleep apnea with an apnea index of 27/h. He had mild non-insulin-dependent diabetes mellitus (NIDDM) but no signs of diabetic neuropathy or other background diseases. The ventilatory responses to hypoxia and hypercapnia tested while he was awake indicated increased respiratory chemosensitivity. We applied nasal continuous positive airway pressure (CPAP) and bilevel positive airway pressure (BPAP) in an attempt to compare the possible difference in therapeutic efficacy. Although nasal CPAP completely reversed central apnea, nasal BPAP adversely affected both apnea length and frequency in an applied pressure-dependent manner. Arterial blood gas analyses while he was being treated indicted alveolar hypoventilation with CPAP and hyperventilation with BPAP. Additionally, administration of a mixed gas containing 5% CO2 through a face mask had a significant effect on the disappearance of central apnea in this patient. These findings support the theory that the arterial PCO2 level is critical in generating idiopathic central apnea and that nasal CPAP therapy may be effective in eliminating central apnea by raising the PaCO2.     

Properties of Bi-doped PbTe layers grown by liquid phase epitaxy under controlled Te vapor pressure

Effects of Bi doping in PbTe liquid-phase epitaxial layers grown by the temperature difference method under controlled vapor pressure (TDM-CVP) are investigated. For Bi concentrations in the solution, x_Bi, lower than 0.2 at.%, an excess deep-donor level (activation energy E_d≈0.03–0.04 eV) appears, and Hall mobility is low. In contrast, for x_Bi>0.2 at.%, Hall mobility becomes very high, while carrier concentration is in the range of 10¹⁷ cm⁻³. Inductive coupled plasma (ICP) emission analysis shows that, for x_Bi=1 at.%, Bi concentration in the epitaxial layer is as high as N_Bi=2.3–2.7 × 10¹⁹ cm⁻³. These results indicate that Bi behaves not only as a donor but also as an acceptor, and the nearest neighbor or very near donor-acceptor (D-A) pairs are formed, so that strong self-compensation of Bi takes place. Carrier concentration for highly Bi-doped layers shows a minimum at a Te vapor pressure of 2.2 × 10⁻⁵ torr for growth temperature 470°C, which is coincident with that of the undoped PbTe.     

Dielectric strength of transformer insulation at DC polarityreversal

Among special insulation tests for DC power converter transformers, polarity reversal tests can be substituted by applied AC voltage tests from a stress similarity in oil ducts. In order to investigate equivalent levels of other insulation tests to polarity reversal tests, the dielectric strength of a transformer at polarity reversals was examined by use of a model of typical oil/paper composite insulation. From the comparison of polarity reversal and other insulation tests, it was found that dielectric strength of transformer insulation at polarity reversals is phenomenally similar to that under switching impulse stresses. Equivalent AC test voltage to polarity reversal test was also estimated from the experimental results. The breakdown characteristics of polarity reversal tests showed that partial discharges at polarity reversals impose less harmful stress on insulation barriers than those at usual AC or impulse tests