Rheological interpretation of heat generation associated with fatigue of polycarbonate

Temperature change was measured of polycarbonate under monotonically increasing tensile and pulsating tensile loads. In the former case, the specimen temperature began to rise when an appreciable amount of viscoelastic strain was noticed on the stress—strain diagram. The rise, θ_v, could be formulated as a function of the viscoelastic strain, εv: In fatigue tests, the average temperature began to rise immediately after the decrease due to the thermoelastic effect. The amount of the heat generation, σ, was nearly constant for each cycle throughout the fatigue process and has a relation to the fatigue life, N_f, (α? a)·N_f = constant, where a is another adjustable constant. From a rheological aspect of dissipation energy, the equation is transformed to a relation between the viscoelastic strain and the fatigue life as εV^1/2 · N_f = constant, which is similar to the one for metals given by Manson and Coffin.⁶ The temperature rise in the fatigue was also related to the viscoelastic strain. The relation is of the same form as for static tension but less by a factor of one order.     

Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

Simple determination of residual anticoccidial drugs (diclazuril and nicarbazin) in chicken tissues by HPLC

A simple and rapid determination of anticoccidial drug residues, diclazuril (DCZ) and nicarbazin (NCZ), in chicken tissues has been developed. DCZ and NCZ were extracted with acetonitrile from chicken liver, muscle, and fat. The extract was rinsed with n-hexane saturated with acetonitrile and then evaporated. The residue was dissolved in 1.4 mL of acetonitrile-methanol (1:1), then 1.0 mL of n-hexane saturated with acetonitrile-methanol (1:1) was added, and the mixture was partitioned by the addition of 0.6 mL of water. DCZ and NCZ in the aqueous layers were determined by HPLC on an Xterra RP-18 column with acetonitrile-0.5% ammonium acetate containing 0.01 mol/L tetra-n-butylammonium hydrogen sulfate (43:57) as the mobile phase. The mean recoveries (n = 5) of DCZ and NCZ spiked in chicken tissues at the maximum residue levels were 92.0-95.6% (CV 2.4-3.0%) and 87.3-89.4% (CV 1.7-2.8%), respectively. The detection limits of DCZ and NCZ were 0.01 and 0.004 microgram/g, respectively.     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

Investigation of gas-liquid interface in atmospheric-pressure micro plasma with solution

An atmospheric-pressure glow-discharge micro plasma in contact with liquid paraffin is stably generated by using a capacitively coupled plasma method with a mesh electrode. When characteristics of the plasma are measured in the boundary between the micro plasma (gas-phase) and liquid paraffin (liquid-phase) using optical emission spectroscopy, spectrum peaks of the emission of CH and C₂ which dissociate from paraffin are observed. The result indicates that solution can feed particles to the plasma at gas-liquid interface and this plasma is accordingly expected to promote an attractive plasma process for creating materials consisting of elements in various solutions.     

Determination of bisphenol A in canned vegetables and fruit by high performance liquid chromatography

A high performance liquid chromatograph y (HPLC) method was developed for the determination of bisphenol A (BPA) that had migrated into canned fruit and vegetables. BPA was extracted with acetonitrile from the solid portion of canned food, and with an OASIS HLB cartridge from the aqueous portion, respectively. Both extracts were cleaned up on a Florisil cartridge. The HPLC separation was carried out on a Wakosil II 3C18 RS column (4.6 × 150mm) with acetonitrile-water (40:60, v/v) as a mobile phase with a flow rate of 0.8 ml/min. BPA was detectable by UV detector at 228 nm and determined with the similarity of chromatographic peak spectrum by multiwavelength detector (similarity index was 0.99 or above). The quantification limits were 10 ng/g for the solid portion and 5 ng/ml for the aqueous portion, respectively. BPA was mainly detected in the solid portion of canned food and found at the maximum level of 11 μg per can. To verify migration into the solid portion of canned food, a partitioning experiment was carried out.     

Knowledge-directed inspection for complex multilayered patterns

Combining the knowledge-based processing with image processing is considered a key issue in the future of visual inspection of complex patterns such as multilayered semiconductor wafers. However, present technology restricts this combination, mainly because of the exhaustively long time usually required for each type of processing. To cope with this situation, a unique knowledge-directed image processing method is proposed, in which every image processing step is controlled in real time by parametric knowledge driven by design patterns. The resulting structure of the image processor is a pipeline, in which each piece of knowledge is embodied as a combination of a hardware processing unit and control unit. In this paper the types of knowledge and their implementation are explained, and an inspection machine for logic IC wafers based on this pipelined knowledgedirected image processing is introduced.