Synergistic effects of doped Fe3+ and deposited Au on improving the photocatalytic activity of TiO2

Fe³⁺ doped together with Au deposited TiO₂ (Au/Fe³⁺–TiO₂) was successfully prepared, which shows excellent photocatalytic activity for degradation of methyl orange (MO) under both UV and visible light (λ > 420 nm) illumination. Fe³⁺ has been confirmed by EPR to substitute for Ti⁴⁺ in the TiO₂ lattice, and Au exists as Au⁰ on the surface of the photocatalyst indicated by the results of XRD. Fe³⁺ and Au have synergistic effects on improving the photocatalytic activity of TiO₂. A proposed mechanism concerning the synergistic effects is discussed to explain the improvement of the photocatalytic activities.     

One-step formation of ethyl methyl ketone from 1-butene and water on ultrastable Y-type zeolite catalyst

Proton exchanged ultrastable Y-type zeolite with silica/alumina = 40 showed a pronounced catalytic activity for the formation of ethyl methyl ketone directly from 1-butene and water. The formation rate of ethyl methyl ketone was much higher than those on MoO₃-based catalysts in the oxidation of 1-butene by oxygen. It was suggested that the basic site necessary for the formation of ethyl ketone directly from 1-butene and water would be the pentacoordinated Al.     

Segmented conjugated polymer based on poly(α-thiophenediyl)benzylidine

Summary Segmented polymers with random sequences of conjugated and non-conjugated blocks are produced by partial dehydrogenation of poly(-thiophenediyl)benzylidene. The fraction of conjugated block was controlled by the elimination time. The polymers gave photoluminescence. Absorption coefficients of the polymers increased with the rate of dehydrogenation, and the highest fluorescence intensity were achieved around 9 % conjugation conversion. The polymers were characterized by ¹H- and ¹³C-n.m.r. and infrared spectra, and were soluble in common organic solvents, which suggests a good processability.     

Who wins when price information is more ubiquitous? An experiment to assess how infomediaries influence price

Internet retailers often make use of price search services (infomediaries) that have the effect of reducing consumer search and expanding seller market presence. Research on price and advertising suggests that this may not be a profitable strategy. We develop an experimental posted-offer market to estimate the impact of infomediaries on price of homogenous goods. We analyze panel data from a range of market conditions that address how infomediaries services affect both seller-level offered price as well as market-level transacted price. We find that, while sellers attempt to extract higher prices through a higher initial offer price when using an infomediary, they fail to successfully collect it; transacted prices remain largely unchanged. As a consequence the benefits of infomediaries fall primarily to the buyer who faces largely unchanged transacted prices, and substantially reduced search costs. Search costs are, in essence shifted to the seller. Sellers who participate in this sort of price comparison should be aware that they are following a high-volume/low profit per unit strategy.     

Analysis of accelerated creep under constant sustaining load for austenitic stainless steels

The effect of stress on creep rate of austenitic stainless steels of type 347 and 316 was studied by applying the differential test technique. It was found that the creep rate could be expressed as follows, whereB ₁ is a material constant depending on temperature,a ₁ anda _o are constants, and σ is the real stress. Considering the increase in real stress during creep process due to void formation and to the decrease in cross sectional area of the specimen, integrating the above equation yields the following creep curve, 1 $$ \in = \in _m + \frac{1}{{n_o \left( {c_o + 1} \right)}}ln\frac{1}{{1 - n_o \left( {c_o + 1} \right) \in _m (t - t_{_m } )}}$$ where ∈ is the creep strain at a given time (t), ∈_m is the minimum creep rate, ∈_m andt _m are the strain and time, respectively, at the minimum creep rate,n _o is a constant, andc _o is the material constant relating to the void formation. This equation agrees very well with the experimental creep curve.     

Epitaxial growth of WOx nanorod array on W(001)

Nanorods of substoichiometric tungsten oxide (WO_x) were grown on W(001) substrates. Two methods for the growth of nanorods were used: oxidation of the substrate under appropriate conditions and the deposition of tungsten oxide from a tungsten foil heated in the presence of oxygen. The grown nanorods were observed using a scanning electron microscope and an atomic force microscope. The diameters of the nanorods were 5–20 nm. The nanorods were slightly inclined from the directions parallel or normal to the surface. The inclination of nanorods was explained in terms of the epitaxial relationship between WO₃ crystals and the W(001) substrate. The WO₃ crystals formed at the initial stage of growth act as the nuclei of WO_x nanorods. We observed selective enhancement of the growth in a certain epitaxial direction depending on the method of growth, and an array of WO_x nanorods was produced on the W(001) substrate.     

Bone Tissue Engineering in Rat Calvarial Defects Using Induced Bone-like Tissue by rhBMPs from Immature Muscular Tissues In Vitro

This study aimed to induce bone-like tissue from immature muscular tissue (IMT) in vitro using commercially available recombinant human bone morphogenetic protein (rhBMP)-2, rhBMP-4, and rhBMP-7, and then implanting this tissue into a calvarial defect in rats to assess healing. IMTs were extracted from 20-day-old Sprague-Dawley (SD) fetal rats, placed on expanded polytetrafluoroethylene (ePTFE) with 10 ng/μL each of rhBMP-2, BMP-4, and BMP-7, and cultured for two weeks. The specimens were implanted into calvarial defects in 3-week-old SD rats for up to three weeks. Relatively strong radiopacity was observed on micro-CT two weeks after culture, and bone-like tissue, comprising osteoblastic cells and osteoids, was partially observed by H&E staining. Calcium, phosphorus, and oxygen were detected in the extracellular matrix using an electron probe micro analyzer, and X-ray diffraction patterns and Fourier transform infrared spectroscopy spectra of the specimen were found to have typical apatite crystal peaks and spectra, respectively. Furthermore, partial strong radiopacity and ossification were confirmed one week after implantation, and a dominant novel bone was observed after two weeks in the defect site. Thus, rhBMP-2, BMP-4, and BMP-7 differentiated IMT into bone-like tissue in vitro, and this induced bone-like tissue has ossification potential and promotes the healing of calvarial defects. Our results suggest that IMT is an effective tissue source for bone tissue engineering.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Growth of AgGaTe2 and AgAlTe2 Layers for Novel Photovoltaic Materials

AgGaTe₂ and AgAlTe₂ layers were grown on a-plane sapphire substrates by closed-space sublimation. These compounds replace Cd in CdTe with group I and III elements, and are, hence, expected to be ideal novel candidate materials for solar cells. The grown layers were confirmed to be stoichiometric AgGaTe₂ and AgAlTe₂ by x-ray diffraction (XRD). The AgAlTe₂ layers had strong preference for the (112) orientation. The XRD spectrum of the AgGaTe₂ layer was different from that of the AgAlTe₂ layer, and strong peaks were observed for (103) and (110) diffraction. The variation in orientations of the grown layers was analyzed in detail by use of XRD pole figures, which revealed that the AgGaTe₂ layers had an epitaxial relationship with the a-plane sapphire substrates.