Mechanism of enhanced impact strength of poly(vinyl chloride) modified by acrylic graft copolymer

The mechanism of enhanced PVC impact strength of poly(vinyl chloride) modified by an acrylic graft copolymer was studied by the three-point bending test on a U-notched bar. In the mechanism, the void formation from the modifier released the constrained strain. The release suppresses the stress below the fibril strength in the material; consequently, stable deformation can develop over a large area and, thus, the impact strength of PVC modified by the acrylic graft copolymer is improved. © 1996 John Wiley & Sons, Inc.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Identification of genes from Aspergillus oryzae that are preferentially expressed in membrane-surface liquid culture

We identified 22 genes from Aspergillus oryzae that are preferentially expressed in membrane-surface liquid culture (MSLC), among which Ser/Thr protein kinase (aopk1) and phosphatase (aoppt) genes were cloned. We also revealed that aopk1 encodes a protein with an N-terminal sequence 150 amino acid residues longer than that predicted from the registered sequence in GenBank.     

Drying of Sewage Sludge During Composting in an Updraft Dryer with the Concept of Using Self-Energy Generated Within the System

An innovative technology for sewage treatment systems is proposed. A mixture of sewage sludge and char particle is subjected to drying in the progress of composting in an updraft column. Exothermic heat generated during composting is utilized for energy of sludge drying. The char particle in the mixture contributes to enhancement of composting and drying rate. This study presents drying and composting behaviors of sludge to examine the effect of char addition. A fundamental drying experiment was carried out by hot-air heating of the sample in a small vessel. The drying characteristic curve for a mixture of sludge and char was greater than the sample of only sludge over a whole period if the drying rates were compared with the same moisture content. The drying behavior could be analyzed with a reasonable agreement by the water front receding model. The enhancement effect of drying and composting of sludge by char addition was confirmed by examination using a pilot scale of the updraft column whose volume was 50 m³. Sludge with 400% dry base (80% wet base) in moisture content could be dried successfully to lower moisture content than 67% dry base (40% wet base) only by exothermic heat during composting without supplying any auxiliary energy from the outside, and the treatment time was reduced by mixing char in sludge. The behavior was analyzed with a satisfactory agreement by a theoretical model employing moisture diffusion parameters determined from the drying characteristic curve.     

Zirconium mesostructures immobilized in calcium alginate for phosphate removal

Eutrophication caused by the excessive supply of phosphate to water bodies has been considered as one of the most important environmental problems. In this study, the powder of zirconium mesostructure (ZM), which was prepared with the template of surfactant, was immobilized in calcium alginate for practical application and the resulting material was tested to evaluate the phosphate removal efficiency. Sorption isotherms and kinetic parameters were obtained by using the entrapped ZM beads with 30 to 60% of ZM. The maximum sorption capacity increased with the higher ZM content. Q _max in Langmuir isotherm was 51.74 mg/g for 60% of ZM with 7 mm of size. The smaller the particle size of the ZM beads, the faster the rate of phosphate removal, because the phosphate ions had less distance to reach the internal pores of the immobilized ZM beads. Chemical and electrochemical regeneration techniques were compared. Phosphates adsorbed on the ZM beads were effectively desorbed with NaCl, NaOH, and Na₂SO₄ solutions. An electrochemical regeneration system consisting of an anion exchange membrane between two platinum-coated titanium electrodes was successfully used to desorb and regenerate the phosphate-saturated ZM beads. Complete regeneration was reached under optimal experimental conditions. Chemical and electrochemical regeneration proved the reusability of the bead form of the entrapped ZM, and will enhance the economical performance of the phosphate treatment process.     

Low cycle fatigue behaviors of elbow pipe with local wall thinning

Low cycle fatigue tests were conducted using 100A elbow specimens made of STPT410 carbon steel with local wall thinning. Local wall thinning by erosion/corrosion was simulated by machined pipe wall thinning. The local wall thinning areas were located at three different areas, called extrados, crown and intrados. The elbow specimens were subjected to cyclic in-plane bending under displacement control without internal pressure. The effects of eroded conditions, such as eroded ratio, eroded angle and position, on the low cycle fatigue behavior and fatigue life were discussed by using experimental results and finite element analyses. Also the location of crack initiation and the crack growth direction could be predicted by three dimensional elasto-plastic finite element analyses. In addition, the safety margin of eroded elbows against seismic loading was discussed by comparing the fictitious stress of elbows with the allowable stress limit demanded by the design code.     

Fast and Almost Complete Nitridation of Mesoporous Silica MCM-41 with Ammonia in a Plug-Flow Reactor

The title reaction proceeded well to yield silicon (oxy)nitride at 973–1323 K using a plug-flow reactor. The degree of nitridation was studied as a function of temperature and time of nitridation, the sample weight, and the flow rate of ammonia. It was dependent on the reaction temperature and the amount of ammonia supplied per sample weight. The nitridation at 1273 K for 10–25 h yielded the oxynitride with 36–39 wt% nitrogen, which was very close to 40 wt% of Si₃N₄. Characterization with X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy measurements, and nitrogen adsorption revealed the conversion of MCM-41 to the corresponding oxynitride without essential loss of the mesoporous structure, the decrements of the lattice constant and the pore diameter by 20–35%, and the increments of the wall thickness by ca. 45%. Solid-state ²⁹Si nuclear magnetic resonance spectra during the nitridation clearly showed fast decrease in SiO₄ species and slow in SiO₃(OH). Various intermediate species, SiO _x N _y (NH₂ or NH) _z , were observed to be formed and finally, ca. 70% SiN₄ species, ca. 20% SiN₃(NH₂ or NH), and ca. 10% SiON₂(NH₂ or NH) were produced, being consistent with the results of the above mentioned elemental analysis.     

Topical Phenomena Observed in a Short-Gap Atmospheric Discharge Using Rotor and Post Electrodes

Correlation of light emission, discharge structure, waveform of the discharge current, electrode configuration, and electromagnetic radiation is examined with the intent of obtaining an effective means for preventing electromagnetic interference (EMI) due to a short-gap discharge. The electromagnetic radiation (EMR) level resulting from a current step which, in turn, was formed by a discrete movement of a cathode spot was clearly recognized. A combination of needle rotor and needle post gave the smallest electromagnetic radiation level in the experiments.     

Phase study on solid fission products,Ba, Sr and Zr in oxide fuel

Behavior of pseudo-fission products (Ba, Sr, and Zr) as oxides in UO₂ has been investigated by means of high-temperature X-ray diffraction and microprobe analysis. Two identifiable compounds were formed as reaction products in the mixed oxides which initially consisted of UO₂, BaO, SrO, and ZrO₂ powder. These compounds were present and were identified crystallographically as (Ba, Sr) ZrO₃ and (Ba, Sr)UO₃ after heat treatment of the powders at 1500°C for 30 min. Both compounds are isostructural with perovskite, CaTiO₃, and the lattice parameters of both (Ba, Sr)ZrO₃ and (Ba, Sr)UO₃ decrease with increasing content of Sr. (Ba, Sr)UO₃ is decomposed almost completely at 1800°C while (Ba, Sr) ZrO₃ is stable up to 2000°C. The behavior of Ba, Sr, and Zr in fuel under irradiation is discussed.