ESR study on radical polymerization of styrene

Summary Propagation rate constant (k_p) for styrene was evaluated at different chain lengths of the polymer radical based on the steady-state concentration of the polymer radical determined by means of ESR spectroscopy at 70°C. Over a range of degree of polymerization of the polymer radical from 40 to 410, the value of k_p, 480±10 L/mol·s, remained constant. A considerable increase in viscosity of the polymerization mixture did not affect this value.     

Removal of Cr(VI) from aqueous solution by London plane leaves

The effect of initial metal concentration, contact time and solution temperature on the removal of Cr(VI) from solution by waste London plane leaves, generated by the pruning of street trees, was investigated in batch mode conditions. The removal of Cr(VI) was highly concentration‐dependent and mainly governed by physico‐chemical adsorption under the weak acidic conditions studied. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures and both the adsorption capacity and adsorption intensity increased with rising temperature. The endothermic nature of the Cr(VI) adsorption was confirmed by the thermodynamic parameters. The study has shown that the waste leaves can be used as an effective adsorbent for removal of Cr(VI) from wastewater. Copyright © 2003 Society of Chemical Industry     

A quadruple-scanning-probe force microscope for electrical property measurements of microscopic materials

Four-terminal electrical measurement is realized on a microscopic structure in air, without a lithographic process, using a home-built quadruple-scanning-probe force microscope (QSPFM). The QSPFM has four probes whose positions are individually controlled by obtaining images of a sample in the manner of atomic force microscopy (AFM), and uses the probes as contacting electrodes for electrical measurements. A specially arranged tuning fork probe (TFP) is used as a self-detection force sensor to operate each probe in a frequency modulation AFM mode, resulting in simultaneous imaging of the same microscopic feature on an insulator using the four TFPs. Four-terminal electrical measurement is then demonstrated in air by placing each probe electrode in contact with a graphene flake exfoliated on a silicon dioxide film, and the sheet resistance of the flake is measured by the van der Pauw method. The present work shows that the QSPFM has the potential to measure the intrinsic electrical properties of a wide range of microscopic materials in situ without electrode fabrication.     

A maximum power point tracking for photovoltaic-SPE system using a maximum current controller

Processes to produce hydrogen from solar photovoltaic (PV)-powered water electrolysis using solid polymer electrolysis (SPE) are reported. An alternative control of maximum power point tracking (MPPT) in the PV-SPE system based on the maximum current searching methods has been designed and implemented.Based on the characteristics of voltage–current and theoretical analysis of SPE, it can be shown that the tracking of the maximum current output of DC–DC converter in SPE side will track the MPPT of photovoltaic panel simultaneously.This method uses a proportional integrator controller to control the duty factor of DC–DC converter with pulse-width modulator (PWM).The MPPT performance and hydrogen production performance of this method have been evaluated and discussed based on the results of the experiment.     

Origin of electron mobility enhancement in (1 1 1)-oriented InGaAs channel metal-insulator-semiconductor field-effect-transistors

Electrical and physical characteristics of the Al₂O₃/InGaAs interfaces with (1 1 1)A and (1 0 0) orientations were investigated in an attempt to understand the origin of electron mobility enhancement in the (1 1 1)A-channel metal-insulator-semiconductor field-effect-transistor. The (1 1 1)A interface has less As atoms of high oxidation states as probed by X-ray photoelectron spectroscopy. The electrical measurements showed that energy distribution of the interface traps for the (1 1 1)A interface is shifted toward the conduction band as compared to that for the (1 0 0) interface. Laterally-compressed cross-section transmission electron microscopy images showed that the characteristic lengths of the interface roughness are different between the (1 1 1)A and (1 0 0) interfaces. The contributions of the Coulomb and roughness scattering mechanisms are discussed based on the experimental results.     

Cutting plane methods for Lagrangian relaxation‐based unit commitment algorithm

In this paper, we study cutting plane methods for a Lagrangian relaxation‐based unit commitment algorithm. In the algorithm, nondifferentiable optimization methods can be applied to optimize the dual function, and a subgradient method which needs parameter tuning and has some drawbacks such as computational inefficiency and oscillating behavior is commonly used. The cutting plane method and the central cutting plane method are applied to the algorithm and implemented using reoptimization techniques. A numerical example shows that both methods are accelerated by the reoptimization techniques and have good convergence without parameter tuning. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 17–29, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10066     

Electrostatic Field Variation in the Atmosphere Induced by Earth Potential Difference Variation During Seismic Wave Propagation

To clarify the relationship between earthquakes and electrical phenomena, signals of three parameters were observed continuously at Sennan in Akita Prefecture, Japan: ground acceleration (GAC), earth potential difference (EPD), and electrostatic field in the atmosphere (EFA). A large metal plate was used as an electrostatic antenna to observe EFA variation. For this paper, we used the digital natural observation (D-NOB) method as a signal processing technique and found clear EPD and EFA waveforms during seismic wave propagation. Our observation and examination results show that GAC causes EPD variation. Subsequently, the EPD variation induces EFA variation     

Annealing effects of a high-quality ZnTe substrate

The sharp photoluminescence (PL) and optical-reflection spectra in the bandedge region of the high-quality nondoped ZnTe substrate (100) were observed at 4.2 K. Free exciton, associated with lower and upper polaritons (EX^L and EX^U) at 2.382 eV and 2.381 eV, respectively, were clearly observed. This meant that this substrate was high quality. The intensity of a bound exciton peak (2.375 eV), which is caused by a Zn vacancy, of a neutral acceptor decreased with an increase of the Zn vapor pressures.