Aging response of the young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr for biomedical applications

Alloys for implant devices require improved strength but a reduced Young’s modulus, in order to become mechanically more compatible with adjacent bone tissues. In this study, a new metastable β-type titanium alloy, Ti-29Nb-13Ta-4.6Zr (wt pct), was subjected to aging treatment to produce different microstructures, and the resulting mechanical properties, including the Young’s modulus, were measured. The Young’s modulus of this alloy is found to be sensitive to microstructures generated by various heat treatments. For microstructures varying from (α + β) to (α + β + ω) and (β + ω), the Young’s modulus increases with an accompanying increase in tensile strength and hardness, but decreases in ductility. The (β + ω) microstructure has a low strength, high modulus, and poor ductility and cannot be used for biomedical applications. For an (α + β) microstructure, the volume fraction of the phases is shown to be the main factor that determines the mechanical properties.     

A cathode readout gas sampling calorimeter with conductive plastic tubes

We constructed and tested a prototype gas sampling electromagnetic calorimeter of the Pb-proportional tube sandwich type. The calorimeter uses conductive plastic tubes and cathode pad readout with a tower structure which resulted in reasonable energy and spatial resolutions for electrons in the momentum range 0.5–4.0 GeV/c; $\text{σ}{}_{\mathrm{E}}\text{E =}\text{21\%}\text{(E(}\text{GeV}\text{)}\text{)}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{, σ}{}_{\mathrm{x}}\text{= 6}\text{mm}\text{(at 3 GeV}$/c). This paper describes the test and the performance studied under various conditions.     

Fabrication of a poly-Si thin-film transistor with storage capacitor

The fabrication process of a low-temperature poly-Si thin-film transistor (TFT) with a storage capacitor was studied. The atmospheric-pressure chemical-vapour deposited SiO₂ protected the buried indium tin oxide (ITO) from reduction by a pure H₂ plasma treatment that was essential for the effective improvement of the poly-Si TFT characteristics. Thus, a storage capacitor with an ITO (picture electrode)-SiO₂-ITO (buried common electrode) structure was successfully fabricated. The poly-Si TFT with a channel width/length W/L ratio of 5 drove a 3 pF storage capacitor in 2 μs, and it showed superior driverability for LCD use. The TFT also had good hold characteristics under illumination for the realization of grey-scale representation.     

Analysis of course errors on CVOR antennas (including effects ofmutual coupling between elements)

A VHF omnidirectional radio range (VOR) is a navigation aid radio beacon facility, which provides aircraft with azimuth information relative to the VOR station in question as the origin. In Japan, two types of VOR-the conventional type (referred to as a CVOR) and the Doppler type (referred to as a DVOR)-are currently in use. An element known as the Alford loop antenna (ALA), which changes the loading reactance, is used for the VOR because the horizontally polarized wave and nondirectivity in the horizontal plane are preferred. A VOR antenna consists of a carrier antenna and a sideband antenna-an aircraft receives separate signals from these two antennas and compares them to obtain azimuth information. The mutual coupling between the elements forming the carrier and the sideband antenna affects the directivity of the single elements, resulting in errors in azimuth information. With the mutual coupling between the antenna elements being taken into consideration, a quantitative calculation was made by using the moment method-the results of the calculation made it clear that a loading reactance value of -320 Ω is better to make not mutually coupled elements nondirectional while a loading reactance value of -600 Ω is optimum to minimize the azimuth error of a CVOR     

Lipopolysaccharide primes human alveolar macrophages for enhanced release of superoxide anion and leukotriene B4: self-limitations of the priming response with protein synthesis

Human alveolar macrophages (AM) can produce potent reactive oxygen intermediates (ROI) and arachidonic acid metabolites (eicosanoids), which have important roles in host defense and the pathogenesis of some diseases of the lung. Bacterial lipopolysaccharide (LPS) is believed to cause profound lung injury and can prime mouse peritoneal macrophages for the enhanced secretion of ROI and eicosanoids. Therefore, we investigated the effect of LPS pretreatment on the ability of AM to release superoxide anions (O2-) and leukotriene B4 (LTB4). LPS can prime AM for the enhanced secretion of O2- and LTB4, regardless of whether they are derived from nonsmokers or smokers. Moreover, judging from the time-response characteristics, this priming for LTB4 release could be inhibited in the later stages of pretreatment, when the O2(-)-releasing capacity was enhanced. The priming inhibition was prevented, at least in part, by cycloheximide, but not by SOD and/or catalase. In addition, cycloheximide also inhibited the priming for O2- release. Hence, protein synthesis might be necessary for the priming for O2- release and for inhibiting the priming for LTB4 release. This phenomenon of self-limiting the priming response with LPS seems to be very important when we consider the high oxygen tension in the lungs and the many bacterial substances inspired into alveoli.     

YM-32890 A and B, new types of macrolide antibiotics produced by Cytophaga sp

Two new types of macrolide antibiotics, YM-32890 A and B, have been isolated from the fermentation broth of cytophaga sp. YL-02905S. In this paper, the taxonomy of the producing strain, fermentation, isolation, structure elucidation, and biological activity of the antibiotics are reported. YM-32890 A inhibits the growth of staphylococci including a macrolide-resistant strain, but shows no antimicrobial activity against other Gram-positive, Gram-negative bacteria and yeast.     

Attenuation of anticonvulsant effects of diazepam after chronic treatment with bicuculline

Changes in the GABAergic system after chronic treatment with bicuculline were examined in two strains of inbred rats, Fischer 344 (F344) and Lewis (LEW). Rats received an IP injection of either bicuculline (2 mg/kg) or vehicle once a day for 12 days. After this chronic treatment, the effects of diazepam (1 mg/kg, IP) and pentobarbital (20 mg/kg, IP) on bicuculline-induced convulsions were measured. Bicuculline was acutely infused into a tail vein at 0.0415 mg/min, and the infusion was terminated when rats showed seizure. Following the chronic bicuculline treatment, the anticonvulsant effect of diazepam, but not of pentobarbital, was significantly reduced as compared to its effect following chronic vehicle treatment in both strains. Both diazepam and pentobarbital showed a significant difference in anticonvulsant effects between strains (F344 > LEW). The hypnotic effects of muscimol, barbital, pentobarbital, and ethanol following chronic bicuculline treatment were examined. There was no significant difference in sleep time induced by these drugs between bicuculline- and vehicle-treated rats. These results suggest that the attenuation of diazepam's anticonvulsant effect after chronic bicuculline treatment may result from functional changes in benzodiazepine receptors and that the anticonvulsant effects of diazepam and pentobarbital may be influenced by genetic factors. Moreover, the hypnotic effects of several drugs tested are apparently not affected by chronic bicuculline treatment.     

A sensorless brushless dc motor system

This paper describes a brushless dc motor system without position or speed sensor. The brushless motor consists of a permanent magnet synchronous motor and a voltage-source inverter capable of controlling the amplitude and frequency of voltage. The rectangular-shaped stator current with a conducting interval of 120° (electrical) is controlled to be in phase with the trapezoidal back electromotive force. This results in producing maximum torque. Variable speed is achieved by adjusting the average motor voltage similarly to chopper control of dc motors. In this paper, two sensorless position detecting methods, i.e., an “indirect method” suited for the lower-speed range and a “direct method” suited for the higher-speed range are proposed. The combination of the two makes it possible to detect the rotor position over a wide-speed range. Furthermore, a speed-sen-sorless PLL control is proposed in applying the principle of the direct method. Experimental results obtained from a prototype brushless dc motor are shown to confirm the validity of the sensorless drive. The starting procedure of the motor also is discussed because it is impossible to detect the rotor position at a standstill.