Optimal head related transfer functions for hearing and monaural localization in elevation: a signal processing design perspective

Localization of sound sources by human listeners has been widely studied and theories and various models of the localization and hearing mechanism have been constructed. In the classical "duplex" theory, sound localization in azimuth is explained by interaural time or equivalently, phase differences at low frequencies, and by interaural amplitude differences at higher frequencies. Head related transfer functions (HRTF's) present a linear system approach to modeling localization by representing the direction-dependent transformation the sound undergoes at each ear. Localization in elevation is explained by directional differences in the HRTF's, which also explains monaural localization. We conjecture that the HRTF's evolved during the course of nature (due to the evolution of the shape and structure of the ear etc.) are optimal with respect to several physically realizable criteria. In this paper, we investigate the problem of defining the design constraints which when optimized yield a set of HRTF's for hearing and monaural vertical localization in an attempt to better understand, and if possible, duplicate nature's design. We pursue an engineer's design perspective and formulate a constrained optimization problem, where the desired set of HRTF's is optimized according to a cost function based on several criteria for localization, hearing and smoothness, and also by imposing physically realizable constraints on the HRTF's such as nonnegativity, energy etc. The value of the cost function for a candidate set of HRTF's is an indication of the similarity of that set of HRTF's with respect to the ideal solution (measured HRTF data). The final optimization results we present are similar to the actual HRTF's measured in human subjects, and the associated cost function values are found to be almost equal. This points to the fact that the optimization criteria defined are quite relevant. The significant outcome of this research is the identification of a relevant set of mathematical criteria that could be optimized in the human auditory system to facilitate good hearing and localization. These criteria along with the associated constraints represent the desirable characteristics of the HRTF's in an HRTF-based localization system, and could lead to a better understanding and modeling of the auditory system.     

Productive Interrelationships between Collaborative Groups Ease the Challenges of Dynamic and Multi-Teaming

Work organization and team membership is highly complex for modern workers. Teams are often dynamic as personnel change during a project. Dynamic team members have to be actively recruited and personnel changes make it harder for participants to retain group focus. Workers are often members of multiple groups. Though prior work has identified the prevalence of multi-teaming and dynamic teams, it has been unable to explain how workers cope with the challenges the new style of work should cause. This paper systematically characterizes the modern organizational landscape from an individual perspective, by studying how people typically organize work across their multiple collaborative groups. A unique contribution of our work is to examine the interrelationships between the collaborative groups individuals typically participate in. We introduce the notion of a collaboration profile to characterize these interrelations. We expected workers to be overburdened by contributing to multiple teams often with shifting personnel. However, we found that multi-teaming involves productive interrelationships between collaborative groups that ease some of the documented challenges of dynamic teams, such as goal setting, recruiting, and group maintenance. We define a typology that describes the various types of collaborative groups workers participate in, and provide examples of productive interrelations between collaborations. In characterizing interrelations between collaborations, we provide detailed examples of how people exploit resources across their different collaborations to address the problems of working in multiple dynamic teams.     

Fibrous myopathy. A rheumatic complication of drug abuse

A progressive fibrous myopathy may result from chronic intramuscular drug abuse. This complication may mimic other rheumatic disorders and early recognition may prevent disability. The patient described here presented with fixed flexion and extension contracture of hips and knees, respectively, after abusing meperidine and other agents for 3 years. Soft tissues of thighs and buttocks were "wood hard," EMG showed absence of action potentials in affected muscles, and biopsy revealed extensive replacement of muscle with dense, acellular fibrous tissue. Possible mechanisms are discussed.     

Preoperative radiotherapy for adenocarcinoma of the rectosigmoid

Ninety-seven patients with adenocarcinoma of the rectosigmoid have been treated with high dose (5000-6000 rad) preoperative irradiation from 1960 through 1972 at the University of Oregon Health Sciences Center. Fifty-seven were initially clinically resectable and 40 were initially inoperable. Forty of the 57 initially clinically resectable patients had "curative" resections and are at risk for more than 5 years. An increase in 5-year survival (from 38% to 53%) and an absence of pelvic recurrence have occurred in those patients receiving preoperative irradiation and "curative" resection. Four of the 40 initially inoperable patients are alive without tumor. Three of the four survivors had irradiation and surgery; one had irradiation only. An additional four patients had no evidence of tumor at death. Tumor was totally sterilized by irradiation and nine patients and reduced to microfocal extent in an additional three of the 97 patients. Incidence of complications was no greater than has been reported in a surgical series from the same institution.     

Microstructure of direct current and pulse magnetron sputtered Cr-B coatings

Chromium diboride thin films possess desirable combinations of properties (such as high hardness, wear resistance, chemical inertness, high thermal and electrical conductivity), which are attractive for a wide range of potential industrial applications. However, these properties depend strongly on the deposition process and parameters. Investigation of the resultant coating structures could explain certain differences between them, giving important information about the characteristics of the deposition process (which in this particular case is a recently developed method involving magnetron sputtering of loosely packed blended powder targets) and pointing out directions for improvement.In this paper, Cr-B coatings deposited by direct current (DC) and DC-pulse magnetron sputtering of loosely packed blended powder targets are characterised by transmission electron microscopy (TEM) techniques (electron diffraction and bright-field/dark-field imaging). The structures of the coatings deposited with different parameters are investigated and compared, and the effect of oxygen contamination on the structure is discussed.Coatings with an extremely fine, nanocolumnar structure were observed. DC sputter deposited (and generally non-stoichiometric) Cr-B coatings exhibit a short range ordered ‘zone T’ microstructure, while DC-pulse deposited stoichiometric CrB₂ coatings are dense and defect-free, crystalline and show strong preferred orientation.A small amount of contamination by oxygen of the interfacial sub-layers (due to the target material being a powder) of the DC-pulse magnetron sputter deposited stoichiometric CrB₂ (and near-stoichiometric CrB) coatings was found to affect the structure by suppressing nanocolumnar growth and promoting equiaxed, nanometer-sized grains, close to the coating/substrate interface. The majority of the coating however remained nanocolumnar.     

Effect of combined shot-peening and PEO treatment on fatigue life of 2024 Al alloy

One of the most important objectives in the surface engineering of light-weight alloys is to enhance their fatigue properties, allowing both increased performance and an extended service life. This can be achieved by forming a hard surface layer while incorporating a favourable stress state. Single surface treatments, for example, Plasma Electrolytic Oxidation (PEO), are not always capable of creating optimal combinations of these characteristics, whereas greater durability can be achieved by applying mechanical pre-treatments prior to the coating. In this work, a combination of shot-peening pre-treatment with plasma electrolytic oxidation coating is studied as a means to improve the fatigue performance of 2024 T351 Al alloy. The shot-peening was carried out in a compressed air configuration using S110 gauge shot at 200% coverage with an intensity of 20 AlmenC. PEO coatings of 30 μm thickness were produced using pulsed bipolar current technology. Fatigue properties were evaluated by a four-point bending technique at a stress ratio of 0.1. Hardness, residual stress and microstructure of the surface layers were studied by Knoop microhardness tests, fluorescence spectroscopy and SEM analyses, respectively. The effect of the combined shot-peening and PEO treatment is an increased fatigue limit and elevated microhardness when compared to aluminium treated only with PEO.     

Brain-computer interfaces for 1-D and 2-D cursor control: designs using volitional control of the EEG spectrum or steady-state visual evoked potentials.

We have developed and tested two electroencephalogram (EEG)-based brain-computer interfaces (BCI) for users to control a cursor on a computer display. Our system uses an adaptive algorithm, based on kernel partial least squares classification (KPLS), to associate patterns in multichannel EEG frequency spectra with cursor controls. Our first BCI, Target Practice, is a system for one-dimensional device control, in which participants use biofeedback to learn voluntary control of their EEG spectra. Target Practice uses a KPLS classifier to map power spectra of 62-electrode EEG signals to rightward or leftward position of a moving cursor on a computer display. Three subjects learned to control motion of a cursor on a video display in multiple blocks of 60 trials over periods of up to six weeks. The best subject's average skill in correct selection of the cursor direction grew from 58% to 88% after 13 training sessions. Target Practice also implements online control of two artifact sources: 1) removal of ocular artifact by linear subtraction of wavelet-smoothed vertical and horizontal electrooculograms (EOG) signals, 2) control of muscle artifact by inhibition of BCI training during periods of relatively high power in the 40-64 Hz band. The second BCI, Think Pointer, is a system for two-dimensional cursor control. Steady-state visual evoked potentials (SSVEP) are triggered by four flickering checkerboard stimuli located in narrow strips at each edge of the display. The user attends to one of the four beacons to initiate motion in the desired direction. The SSVEP signals are recorded from 12 electrodes located over the occipital region. A KPLS classifier is individually calibrated to map multichannel frequency bands of the SSVEP signals to right-left or up-down motion of a cursor on a computer display. The display stops moving when the user attends to a central fixation point. As for Target Practice, Think Pointer also implements wavelet-based online removal of ocular artifact; however, in Think Pointer muscle artifact is controlled via adaptive normalization of the SSVEP. Training of the classifier requires about 3 min. We have tested our system in real-time operation in three human subjects. Across subjects and sessions, control accuracy ranged from 80% to 100% correct with lags of 1-5 s for movement initiation and turning. We have also developed a realistic demonstration of our system for control of a moving map display (http://ti.arc.nasa.gov/).     

Socioeconomic Status, Resources, Psychological Experiences, and Emotional Responses: A Test of the Reserve Capacity Model.

The current study used ecological momentary assessment to test several tenets of the reserve capacity model (L.C. Gallo & K. A. Matthews, 2003). Women (N = 108) with varying socioeconomic status (SES) monitored positive and negative psychosocial experiences and emotions across 2 days. Measures of intrapsychic and social resources were aggregated to represent the reserve capacity available to manage stress. Lower SES was associated with less perceived control and positive affect and more social strain. Control and strain contributed to the association between SES and positive affect. Lower SES elicited greater positive but not negative emotional reactivity to psychosocial experiences. Women with low SES had fewer resources relative to those with higher SES, and resources contributed to the association between SES and daily experiences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)