This paper reports on the structural, mechanical and tribological properties of molybdenum–copper nanocomposite films ‘doped’ with small amounts of nitrogen, which contain either no nitride phase (i.e. the nitrogen is held in interstitial solid solution, mainly in molybdenum) or small amounts of lower nitrides (i.e. Mo2N). All films were deposited on Si wafers, AISI M2 high speed steel and AISI 316 stainless steel by reactive sputtering using a hot-filament-enhanced dc unbalanced magnetron system. A systematic approach was adopted to investigate the evolution of metal/metal and ceramic/metal phase combinations with increasing nitrogen content (up to 40 at.% N) in the film. Coating composition and microstructure were determined by cross-sectional TEM, SEM and XPS. XRD was used to identify (where possible) metallic and metal-nitride phases. Mechanical properties such as hardness and elastic modulus were determined by low load Knoop and instrumented Vickers indentation measurements. Reciprocating sliding, micro-abrasion and impact tests were performed to assess tribological performance.
It was found that increasing the nitrogen gas flow rate from 0 to 15 sccm (and therefore nitrogen content in the film from 0 to 24 at.% N), refined significantly the coating microstructure from columnar to a dense and more equiaxed morphology, increasing the hardness whilst maintaining (almost constant) elastic modulus values, close to that of molybdenum metal. Further increases in the nitrogen gas flow rate resulted in films that appeared to contain significant fractions of the Mo2N ceramic phase. SEM and cross-sectional TEM analyses of the film deposited at a nitrogen flow rate of 20 sccm (containing 36 at.% N) demonstrated a microstructure consisting of 50–100 nm wide columns, which contain small regions of contrast in dark-field images, of the order of 3–5 nm wide. A maximum hardness of 32 GPa and the highest hardness/modulus ratio was however found in the (predominantly metallic) film deposited at a nitrogen gas flow rate of 15 sccm. This film also performed best in both micro-abrasion and impact wear tests; in contrast, the ‘ceramic’ film (deposited at 20 sccm nitrogen flow rate) performed better in reciprocating sliding wear. 相似文献
In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10?6 g/m2?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three. 相似文献
In this paper we show, for the first time, how Radial Basis Function (RBF) network techniques can be used to explore questions surrounding authorship of historic documents. The paper illustrates the technical and practical aspects of RBF's, using data extracted from works written in the early 17th century by William Shakespeare and his contemporary John Fletcher. We also present benchmark comparisons with other standard techniques for contrast and comparison.David Lowe is Professor of Neural Computing at Aston University, UK. His research interests span from the theoretical aspects of dynamical systems theory and statistical pattern processing, to a wide range of application domains, from financial market analysis (Novel Exploitation of Neural Network Methods in Financial Markets, invited paper,World Conference on Computational Intelligence, vol. VI, pp. 3623–28, 1994) to the artificial nose (Novel Topographic Nonlinear Feature Extraction using Radial Basis Functions for Concentration Coding in the Artificial Nose,3rdIEE International Conference on Artificial Neural Networks, pp. 95–99, Conference Publication number 372, The Institute of Electrical Engineers, 1993).Robert Matthews is a visiting research fellow at Aston University. His research interests include probability, number theory and astronomy. His recent paper inNature (vol. 374, pp. 681–82, 1995) somehow managed to combine all three. 相似文献
Health care executives across the country, faced with intense competition, are being forced to consider drastic cost cutting measures as a matter of survival. The entire health care industry is under siege from boards of directors, management and others who encourage health care systems to take actions ranging from strategic acquisitions and mergers to simple "downsizing" or "rightsizing," to improve their perceived competitive positions in terms of costs, revenues and market share. In some cases, management is poorly prepared to work within this new competitive paradigm and turns to consultants who promise that following their methodologies can result in competitive advantage. One favored methodology is reengineering. Frequently, cost cutting attention is focused on the materials management budget because it is relatively large and is viewed as being comprised mostly of controllable expenses. Also, materials management is seldom considered a core competency for the health care system and the organization performing these activities does not occupy a strongly defensible position. This paper focuses on the application of a reengineering methodology to healthcare materials management. 相似文献
Necrotizing enterocolitis (NEC) and midgut volvulus (MGV) often are associated with extensive bowel necrosis. These cases may require extensive enterectomy and the formation of high or multiple stomas, and frequently are complicated by short bowel syndrome, excessive fluid losses, fistulas, stenosis, and skin breakdown. This report describes a "clip and drop-back" technique, followed by delayed anastomosis performed 48 to 72 hours later. The technique was successful in five severely ill infants (3 NEC, 2 MGV) with extensive necrosis, bowel perforation(s), and peritonitis, who required either a high stoma near the ligament of Treitz or multiple resections and enterostomies. This method removes obvious necrotic perforated bowel, controls contamination, avoids stomas (and their inherent complications in this age group), and preserves bowel length. All five babies survived. The technique is a useful addition to the pediatric surgeon's operative armamentarium in selective cases. 相似文献
Patent legislation governing drugs has evolved through a series of amendments to the Patent Act. From 1923 until 1993, Canada operated a system of "compulsory licensing," allowing generic copies of patented medicines to be manufactured within Canada and, by 1969, to be imported. In 1987, the act was amended (Bill C-22) to provide patented medicines with a fixed period of market protection before a compulsory license could be issued and to create a price review board to monitor and control prices charged. In return for patent protection, brand-name drug companies promised to invest a growing percentage of sales revenue in research and development in Canada. A 1993 amendment to the Patent Act (Bill C-91) brought a fundamental change to the legislation by abolishing the system of compulsory licensing and applying general patent regulations to medicines, thereby bringing Canadian law into line with that of its trading partners. It is now illegal to sell a copy of a drug until the patent expires (20 years after the patent is filed). This means that marketed drugs are protected for 8 to 13 years, since drug development takes a large proportion of the life of the patent. Since this amendment was passed, the brand-name drug companies have made major contributions to research and development in Canada, increasing from 6.5% of sales revenue in 1987 to 11.6% in 1994. Major irritants in the legislation remain. Generic drug companies have complained about "linkage regulations" that allow brand-name drug companies to legally challenge generic drug production on the basis of alleged infringements of linked patents, delaying the marketing of the generic drug. The act also prohibits Canadian manufacturers from exporting a generic drug to a country where it is not protected if it still protected in Canada. Brand-name manufacturers want some means of patent term restoration if regulatory authorities prolong the time taken before marketing a drug. This legislation is being reviewed by parliament beginning in 1997. 相似文献
Mean MMPI profiles of 40 Indian and 40 White veterans were similar, but "Indianism," as measured by the Indian Culturalization Test, was significantly related to scores on Hs, Hy, Pt and Sc scales. Caution is advised in using the MMPI in the diagnosis of Indians' psychiatric problems. 相似文献
Work organization and team membership is highly complex for modern workers. Teams are often dynamic as personnel change during a project. Dynamic team members have to be actively recruited and personnel changes make it harder for participants to retain group focus. Workers are often members of multiple groups. Though prior work has identified the prevalence of multi-teaming and dynamic teams, it has been unable to explain how workers cope with the challenges the new style of work should cause. This paper systematically characterizes the modern organizational landscape from an individual perspective, by studying how people typically organize work across their multiple collaborative groups. A unique contribution of our work is to examine the interrelationships between the collaborative groups individuals typically participate in. We introduce the notion of a collaboration profile to characterize these interrelations. We expected workers to be overburdened by contributing to multiple teams often with shifting personnel. However, we found that multi-teaming involves productive interrelationships between collaborative groups that ease some of the documented challenges of dynamic teams, such as goal setting, recruiting, and group maintenance. We define a typology that describes the various types of collaborative groups workers participate in, and provide examples of productive interrelations between collaborations. In characterizing interrelations between collaborations, we provide detailed examples of how people exploit resources across their different collaborations to address the problems of working in multiple dynamic teams. 相似文献