Effect of diacetyl piquerol on H+-ATPase activity of microsomes fromIpomoea purpurea

The effect of an allelopathic compound, diacetyl-piquerol on the H⁺ -ATPase activity of the microsomal fraction from the radicles of a common weedIpomoea purpurea was studied. The diacetyl-piquerol inhibited the germination and radicle growth fromI. purpurea; the radicle growth was increasingly inhibited (10% to 100%) as piquerol concentrations were raised (10 M to 1000 M). The H⁺-ATPase activity was inhibited (48%) by 500 M diacetyl-piquerol, and this inhibition was higher in plasma membrane ATPase (67.2%) than in tonoplast membrane ATPase (31.4%). Additional studies of the precise physiological mechanisms of interference caused by allelopathic compounds are needed.This study was sponsored by Project PCECCCNA-050954 of Consejo Nacional de Ciencia y Tecnología (CONACyT).     

Three-dimensional space-vector modulation algorithm for four-leg multilevel converters using abc coordinates

In this paper, a novel three-dimensional (3-D) space-vector algorithm for four-leg multilevel converters is presented. It can be applied to active power filters or neutral-current compensator applications for mitigating harmonics and zero-sequence components using abc coordinates (referred from now on this paper as natural coordinates). This technique greatly simplifies the selection of the 3-D region where a given voltage vector is supposed to be found. Compared to a three-level modulation algorithm for three-leg multilevel converters, this algorithm does not increase its complexity and the calculations of the active vectors with the corresponding switching time that generate the reference voltage vector. In addition, the low-computational cost of the proposed algorithm is always the same and it is independent of the number of levels of the converter.     

Gas-sensing properties of sprayed films of (CdO)/sub x/(ZnO)/sub 1-x/ mixed oxide

A novel NO/sub 2/ sensor based on (CdO)/sub x/(ZnO)/sub 1-x/ mixed-oxide thin films deposited by the spray pyrolysis technique is developed. The sensor response to 3-ppm NO/sub 2/ is studied in the range 50/spl deg/C-350/spl deg/C for three different film compositions. The device is also tested for other harmful gases, such as CO (300 ppm) and CH/sub 4/ (3000 ppm). The sensor response to these reducing gases is different at different temperatures varying from the response typical for the p-type semiconductor to that typical for the n-type semiconductor. Satisfactory response to NO/sub 2/ and dynamic behavior at 230/spl deg/C, as well as low resistivity, are observed for the mixed-oxide film with 30% Cd. The response to interfering gas is poor at working temperature (230/spl deg/C). On the basis of this study, a possible sensing mechanism is proposed.     

Complementing retrofit with engagement: exploring energy consumption with social housing tenants

Councils and social housing organisations are looking to retrofit as a way to make their housing more energy efficient. Previous studies on energy use in social housing have generally focussed on the technological aspects (such as the potential savings possible by retrofitting this class of housing across the UK) or have involved one‐off interventions or measures. During a 2‐year period, we worked with previously homeless people to reduce their energy consumption. The 32 participants lived in small blocks of flats (owned by a social housing organisation) that underwent retrofitting with air source heat pumps. We ran a three‐phase tenant engagement programme to compare a range of approaches aimed at energy reduction. It was found that education, social norms and self‐awareness are all key components when it comes to initiating environmentally responsible behaviours. The three approaches complemented each other, and these ought to be considered alongside technology provision if the aim is to reduce energy consumption. A number of reflections on the implementation of medium‐term tenant engagement programmes are also presented. Copyright © 2016 John Wiley & Sons, Ltd.     

Take care of your belongings today – securing accessibility to complex electronic business processes

Most of today’s business processes are based solely on digital data. Input, output, and intermediate results are pure digital objects. Keeping such data accessible and meaningful but even more importantly keeping the business processes functional is challenging. With regards to complex electronic business processes traditional archiving does not provide satisfactory results. Due to the fast technical life-cycle the time gap between archiving and re-enactment or reuse of a process poses risks and increases the uncertainty on achievable results. We propose a novel strategy bridging this specific time gap. For this we present a scalable and cost-effective infrastructure with associated workflows focusing on a process’ execution context. Most importantly the process’ developers are able to assess the preserved results in a timely manner, and thus, reduce the uncertainty on future re-enactment results.     

A graph‐based postoptimization approach for covering arrays

Covering arrays (CAs) are combinatorial objects with interesting features that have practical applications such as experimental design and fault detection in hardware and software. We introduce a graph‐based postoptimization (GBPO) approach to reduce the size of CAs exploiting the redundancy in CAs previously constructed. To evidence the advantages of using GBPO, we have instantiated it with 2 sets of CAs: (1) 560 CAs of strength 2≤t≤6, alphabet 2≤v≤6, and parameters 3≤k≤32 generated by an optimized version of In‐Parameter‐Order‐Generalized (IPOG‐F) and GBPO improved all CAs, and 37 cases matched the best‐known upper bounds; and (2) 32 CAs of strength t=2, alphabet 3≤v≤6, and number of parameters 8≤k≤146; in this set, 16 cases were improved, and 16 cases were matched.     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Process development for the laser powder bed fusion of WC-Ni Cermets using sintered-agglomerated powder

Although ceramic particle-metal matrix materials (i.e., cermets) can offer superior performance, manufacturing these materials via conventional means is difficult compared to the manufacturing of metal alloys. This study leverages the laser powder bed fusion (LPBF) process to additively manufacture dense tungsten carbide (WC)-17 wt.% nickel (Ni) composite specimens using novel spherical, sintered-agglomerated composite powder. A range of processing parameters yielding high-density specimens was discovered using a sequential series of experiments comprised of single bead, multi-layer, and cylindrical builds. Cylinders with a relative density >99% were fabricated and characterized in terms of microstructure, chemical composition, and hardness. Scanning electron microscopy images show favorable wetting between the Ni binder and carbide particles without any phase segregation and laser processing increased the average carbide particle size. Energy dispersive X-ray and X-ray diffraction analyses detected traces of secondary products after laser processing. For samples processed at high energy densities, complex carbides and carbon agglomerate phases were detected. The maximum hardness of 60.38 Rockwell C is achieved in the printed samples. The successful builds in this study open the way for LPBF of dense WC-Ni parts with a large workable laser power-laser velocity processing window.     

Advanced Monte Carlo simulations of the adsorption of chiral alcohols in a homochiral metal‐organic framework

Grand canonical Monte Carlo (GCMC) simulations with configurational biasing were used to study the enantioselective adsorption of four alkanols in a homochiral metal‐organic framework, known as hybrid organic‐inorganic zeolite analogue HOIZA‐1. Conventional GCMC simulations are not able to converge satisfactorily for this system due to the tight fit of the chiral alcohols in the narrow pores. However, parallel tempering and parallel mole‐fraction GCMC simulations overcome this problem. The simulations show that the enantioselective adsorption of the different (R,S)‐alkanols is due to the specific geometry of the chiral molecules relative to the pore size and shape. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2324–2334, 2014