Assessment of extreme and metocean conditions in the Maldives for OTEC applications

The Maldives is a group of tropical atolls, considered globally to be one of the most desirable holiday destinations. There is an urgent requirement to decrease their dependency on fossil fuels that are currently the main source of energy, and a number of renewable energy alternatives are being evaluated. Among these, due to the favorable oceanographic and bathymetric conditions, ocean thermal energy conversion (OTEC) systems represent a viable opportunity for clean and reliable power. However, the stresses the OTEC platform will need to endure during adverse environmental conditions are not well defined. The magnitude of these stresses will then have a direct influence on the design of the OTEC device. In order to overcome this uncertainty, this paper uses hindcast data sets from global weather and ocean models to assess the metocean conditions of the Maldives, with particular reference to extreme conditions. After selecting a suitable location for the deployment of the devices, return values calculated using the peaks‐over‐threshold (POT) methodology are estimated for wind, waves, and currents. The 100‐year return value for the significant wave height is found to be 4.5 m, with a joint occurrence of energy periods between 7.5 and 8.5 seconds, whereas the 100‐year return wind has a velocity of 17.8 m/s and the 100‐year return current of 1.9 m/s. The directionality of these extreme events is also considered, showing the southern and western sub‐quadrants as the prevailing sources, which provides essential information for positioning of the platform. Additional evaluations of tropical revolving storms (TRS) and variations in temperature and salinity patterns are also provided over a 1500‐m water column; temperature varies by approximately 24°C, and salinity by around 2 ppt, showing the suitability of OTEC platforms in the Maldives. This work is therefore of interest to offshore renewable energy stakeholders interested in developing a project in the Maldives or those conducting an analogous analysis in other locations.     

Improving Implicit Stochastic Reservoir Optimization Models with Long-Term Mean Inflow Forecast

This technical note introduces a reservoir operation model based on implicit stochastic optimization (ISO) in which the release policy is guided by the forecast of the mean inflow for a given future horizon rather than by the prediction of the current-month inflow, such as in typical ISO models. The model also does not require the forecast of all inflows for the future horizon and shows to be more efficient in finding less vulnerable release policies when compared to several other explicit and implicit stochastic procedures.     

Not so black and white: Memory for ambiguous group members.

Exponential increases in multiracial identities, expected over the next century, create a conundrum for perceivers accustomed to classifying people as their own- or other-race. The current research examines how perceivers resolve this dilemma with regard to the own-race bias. The authors hypothesized that perceivers are not motivated to include ambiguous-race individuals in the in-group and therefore have some difficulty remembering these individuals. Both racially ambiguous and other-race faces were misremembered more often than own-race faces (Study 1), though memory for ambiguous faces was improved among perceivers motivated to include biracial individuals in the in-group (Study 2). Racial labels assigned to racially ambiguous faces determined memory for these faces, suggesting that uncertainty provides the motivational context for discounting ambiguous faces in memory (Study 3). Finally, an inclusion motivation fostered cognitive associations between racially ambiguous faces and the in-group. Moreover, the extent to which perceivers associated racially ambiguous faces with the in-group predicted memory for ambiguous faces and accounted for the impact of motivation on memory (Study 4). Thus, memory for biracial individuals seems to involve a flexible person construal process shaped by motivational factors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Response of real-time black carbon mass instruments to mini-CAST soot

Soot is a climate forcer and a dangerous air pollutant that has been increasingly regulated. In aviation, regulatory measurements of soot mass concentration in the exhaust of aircraft turbine engines are to be based on measurements of black carbon (BC) calibrated to elemental carbon (EC) content of diffusion flame soot. The calibration soot must currently meet only one criterion: minimum EC to total carbon (TC) ratio of 0.8. However, not including soot properties other than the EC/TC ratio may potentially lead to discrepancies between different BC measurements. We studied the response of two instruments, the AVL Micro-Soot Sensor (MSS) and the Artium Laser-Induced Incandescence 300 (LII), to soot from two miniature combustion aerosol standard (mini-CAST) burners. By changing the air-fuel ratio, premixing nitrogen into the fuel, and using a catalytic stripper to remove volatile compounds, we produced a wide range of particle morphologies and EC contents. As the EC content decreased, both the instruments underreported the EC mass, but the LII diverged more severely. Upon closer investigation of eight conditions with EC/TC > 0.8, the LII underreporting was found independent of primary particle size, but increased with decreasing geometric mean diameter of the soot agglomerates. As the geometric mean diameter decreased from 160 nm to 50 nm, the differences between the LII and MSS increased from 15% to 50%. The results suggest that in addition to EC content, calibration procedures for the regulatory BC measurements may need to take particle size distributions into account.

© 2016 American Association for Aerosol Research     

利用氦流法真密度仪研究水泥水化过程

采用氦流法真密度仪测定了水泥水化过程中水泥浆体的绝对体积变化,并根据水泥浆体绝对体积变化曲线将水泥水化过程划分为极速收缩期、收缩暂停期、快速收缩期和收缩趋缓期4个阶段.结果表明:水泥浆体极速收缩期和快速收缩期发生的绝对体积变化最为明显,且变化幅度较大,其与C_3A和C_3S的水化密切相关;水泥浆体收缩暂停期的绝对体积通常呈线性规律缓慢减小,但变化幅度较小,其规律与"欠饱和度理论"相符;水泥浆体收缩趋缓期的绝对体积变化曲线通常会出现"膨胀"假象,不能反映水泥浆体绝对体积变化的实际情况,但与水泥浆体孔结构的发展有关,对水泥水化行为的表征仍具有重要的指导意义;水灰比不仅可以影响水泥水化过程,而且可以对水泥浆体各水化阶段的绝对体积变化产生明显影响.     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

A novel thermoplastic polyurethane scaffold fabrication method based on injection foaming with water and supercritical carbon dioxide as coblowing agents

Injection foaming is an method for mass producing lightweight, foamed plastic components with excellent dimensional stability while using less material and energy. In this study, a novel injection foaming method employing supercritical CO₂ (scCO₂) and water as coblowing agents was developed to produce thermoplastic polyurethane (TPU) components with a uniform porous structure and no solid skin. Various characterization techniques were employed to investigate the cell morphology, crystallization behavior, and static and dynamic mechanical properties of solid injection molded samples, foamed samples using CO₂ or water as a single blowing agent, and foamed samples using both CO₂ and water as coblowing agents. When compared with CO₂ foamed samples, samples produced by the coblowing method exhibited much more uniform cell morphologies without a noticeable reduction in mechanical properties. Moreover, these TPU samples had almost no skin layer, which permitted the free transport of nutrients and waste throughout the samples. Such a mass‐produced, skin‐free structure is desirable in tissue engineering. In this study, the biocompatibility of the scaffolds was confirmed and the effect of these blowing agents on the TPU foaming behavior was studied. POLYM. ENG. SCI., 54:2947–2957, 2014. © 2014 Society of Plastics Engineers     

‘Living’ free radical graft copolymers,II: Structure

Poly(vinyl chloride)–n-propyl xanthate (PVC–nPX) macroinitiators with 3 to 14 bonded xanthate groups per molecule were synthesized using PVC and potassium n-propyl xanthate. The reaction took place rapidly between 30 and 45°C. Ultraviolet (UV) and nuclear magnetic resonance studies confirmed the presence of xanthyl groups on these macroinitiators. The PVC–nPX macroinitiators were grafted by methyl methacrylate under UV irradiation of 254, 302 and 336 nm producing graft copolymers and homopolymers. The molecular weights increased with increasing conversion, which is consistent with a ‘living’ polymerization process. The active species in these polymerizations are believed to be macroradicals and xanthyl radicals.     

Functional Characterization of the Solute Carrier LAT-1 (SLC7A5/SLC2A3) in Human Brain Capillary Endothelial Cells with Rapid UPLC-MS/MS Quantification of Intracellular Isotopically Labelled L-Leucine

The solute carrier L-type amino acid transporter 1 (LAT-1/SLC7A5) is a viable target for drug delivery to the central nervous system (CNS) and tumors due to its high abundance at the blood–brain barrier and in tumor tissue. LAT-1 is only localized on the cell surface as a heterodimer with CD98, which is not required for transporter function. To support future CNS drug-delivery development based on LAT-1 targeting, we established an ultra-performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) assay for stable isotopically labeled leucine ([¹³C₆, ¹⁵N]-L-leucine), with a dynamic range of 0.1–1000 ng/mL that can be applied for the functional testing of LAT-1 activity when combined with specific inhibitors and, consequently, the LAT-1 inhibition capacity of new compounds. The assay was established in a 96-well format, facilitating high-throughput experiments, and, hence, can support the screening for novel inhibitors. Applicable recommendations of the US Food and Drug Administration and European Medicines Agency for bioanalytical method validation were followed to validate the assay. The assay was applied to investigate the IC₅₀ of two well-known LAT-1 inhibitors on hCMEC/D3 cells: the highly specific LAT-1 inhibitor JPH203, which was also used to demonstrate LAT-1 specific uptake, and the general system L inhibitor BCH. In addition, the [¹³C₆, ¹⁵N]-L-leucine uptake was determined on two human brain capillary endothelial cell lines (NKIM-6 and hCMEC/D3), which were characterized for their expressional differences of LAT-1 at the protein and mRNA level and the surface amount of CD98. The IC₅₀ values of the inhibitors were in concordance with previously reported values. Furthermore, the [¹³C₆, ¹⁵N]-L-leucine uptake was significantly higher in hCMEC/D3 cells compared to NKIM-6 cells, which correlated with higher expression of LAT-1 and a higher surface amount of CD98. Therefore, the UPLC-MS/MS quantification of ([¹³C₆, ¹⁵N]-L-leucine is a feasible strategy for the functional characterization of LAT-1 activity in cells or tissue.     

Identification of Entry Inhibitors against Delta and Omicron Variants of SARS-CoV-2

Entry inhibitors against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are urgently needed to control the outbreak of coronavirus disease 2019 (COVID-19). This study developed a robust and straightforward assay that detected the molecular interaction between the receptor-binding domain (RBD) of viral spike protein and the angiotensin-converting enzyme 2 (ACE2) receptor in just 10 min. A drug library of 1068 approved compounds was used to screen for SARS-CoV2 entry inhibition, and 9 active drugs were identified as specific pseudovirus entry inhibitors. A plaque reduction neutralization test using authentic SARS-CoV-2 virus in Vero E6 cells confirmed that 2 of these drugs (Etravirine and Dolutegravir) significantly inhibited the infection of SARS-CoV-2. With molecular docking, we showed that both Etravirine and Dolutegravir are preferentially bound to primary ACE2-interacting residues on the RBD domain, implying that these two drug blocks may prohibit the viral attachment of SARS-CoV-2. We compared the neutralizing activities of these entry inhibitors against different pseudoviruses carrying spike proteins from alpha, beta, gamma, and delta variants. Both Etravirine and Dolutegravir showed similar neutralizing activities against different variants, with EC50 values between 4.5 to 5.8 nM for Etravirine and 10.2 to 22.9 nM for Dolutegravir. These data implied that Etravirine and Dolutegravir may serve as general spike inhibitors against dominant viral variants of SARS-CoV-2.