Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy

Processing by severe plastic deformation (SPD) typically increases the strength of metals and alloys drastically by decreasing their grain size into the submicrometer or nanometer range but the ductility of such materials remains typically low. This report describes the first demonstration that it is possible to increase the room temperature ductility of aluminum-based alloys processed by SPD and to attain elongations to failure of >150% while retaining the enhanced strength. This unique combination of properties is due to the occurrence of grain boundary sliding at room temperature. The sliding was obviously achieved by introducing a grain boundary wetting of the aluminum/aluminum grain boundaries.     

Enhanced photoluminescence of porous silicon nanoparticles coated by bioresorbable polymers

A significant enhancement of the photoluminescence (PL) efficiency is observed for aqueous suspensions of porous silicon nanoparticles (PSiNPs) coated by bioresorbable polymers, i.e., polylactic-co-glycolic acid (PLGA) and polyvinyl alcohol (PVA). PSiNPs with average size about 100 nm prepared by mechanical grinding of electrochemically etched porous silicon were dispersed in water to prepare the stable suspension. The inner hydrophobic PLGA layer prevents the PSiNPs from the dissolution in water, while the outer PVA layer makes the PSiNPs hydrophilic. The PL quantum yield of PLGA/PVA-coated PSiNPs was found to increase by three times for 2 weeks of the storage in water. The observed effect is explained by taking into account both suppression of the dissolution of PSiNPs in water and a process of the passivation of nonradiative defects in PSiNPs. The obtained results are interesting in view of the potential applications of PSiNPs in bioimaging.     

Microscale geochemical gradients in Hanford 300 Area sediment biofilms and influence of uranium

The presence and importance of microenvironments in the subsurface at contaminated sites were suggested by previous geochemical studies. However, no direct quantitative characterization of the geochemical microenvironments had been reported. We quantitatively characterized microscale geochemical gradients (dissolved oxygen (DO), H₂, pH, and redox potential) in Hanford 300A subsurface sediment biofilms. Our results revealed significant differences in geochemical parameters across the sediment biofilm/water interface in the presence and absence of U(VI) under oxic and anoxic conditions. While the pH was relatively constant within the sediment biofilm, the redox potential and the DO and H₂ concentrations were heterogeneous at the microscale (<500-1000 μm). We found microenvironments with high DO levels (DO hotspots) when the sediment biofilm was exposed to U(VI). On the other hand, we found hotspots (high concentrations) of H₂ under anoxic conditions both in the presence and in the absence of U(VI). The presence of anoxic microenvironments inside the sediment biofilms suggests that U(VI) reduction proceeds under bulk oxic conditions. To test this, we operated our biofilm reactor under air-saturated conditions in the presence of U(VI) and characterized U speciation in the sediment biofilm. U L_III-edge X-ray absorption spectroscopy (XANES and EXAFS) showed that 80-85% of the U was in the U(IV) valence state.     

Enhancing the fraction of grafted polystyrene on silica hybrid nanoparticles

Polymer-grafted inorganic nanoparticles are being developed for a diverse array of applications, ranging from drug delivery to multifunctional composites. In many instances, performance of these core-shell hybrids is limited by relatively broad distributions of size and composition, as well as the presence of impurities, such as unattached polymer chains. Herein, further synthetic improvements, and associated characterization techniques, to enhance the fraction of the grafted polystyrene shell on silica hybrid nanoparticles are discussed. We found that during surface-initiated atom transfer radical polymerization (SI-ATRP) from the silica nanoparticles, thermal self-initiation of styrene produces unattached polymer chains. Size exclusion chromatography afforded a facile approach to quantify the mass of the unattached polymer, and provide a substantial refinement to estimates of chain graft density beyond traditionally-used approaches, such as thermogravimetry. This fraction of unattached polymer is still present even after post-polymerization work-up via precipitation and re-dissolution. Removal necessitates additional procedures, such as high speed centrifugation. Selection of a lower polymerization temperature, in concert with a more reactive Cu complex, significantly reduces the amount of unattached polystyrene impurity. The improved polymerization conditions and post-polymerization purification provide more refined polystyrene-grafted silica nanoparticles to clarify structure-property relationships of these core-shell hybrids.     

Broadband light-induced absorbance change in multilayer graphene

We report the ultrafast light-induced absorbance change in CVD-grown multilayer graphene. Using femtosecond pump-probe measurements in 1100-1800 nm spectral range, we revealed broadband absorbance change when the probe photon energy was higher than that of the pump photon. The observed phenomenon is interpreted in terms of the Auger recombination and impact ionization playing a significant role in the dynamics of photoexcited carriers in graphene.     

Non-homogeneous extracellular resistivity affects the current-source density profiles of up-down state oscillations

Rhythmic local field potential (LFP) oscillations observed during deep sleep are the result of synchronized electrical activities of large neuronal ensembles, which consist of alternating periods of activity and silence, termed 'up' and 'down' states, respectively. Current-source density (CSD) analysis indicates that the up states of these slow oscillations are associated with current sources in superficial cortical layers and sinks in deep layers, while the down states display the opposite pattern of source-sink distribution. We show here that a network model of up and down states displays this CSD profile only if a frequency-filtering extracellular medium is assumed. When frequency filtering was modelled as inhomogeneous conductivity, this simple model had considerably more power in slow frequencies, resulting in significant differences in LFP and CSD profiles compared with the constant-resistivity model. These results suggest that the frequency-filtering properties of extracellular media may have important consequences for the interpretation of the results of CSD analysis.     

Electron beam radiation of dried fruits and nuts to reduce yeast and mold bioburden

Dried fruits and nuts make up a significant portion of the commodities traded globally, and the presence of yeasts and molds on dried fruits and nuts can be a public health risk because of the potential for exposure to toxigenic fungi. Since current postharvest treatment technologies are rather limited for dried fruits and nuts, electron beam (E-beam) radiation experiments were performed to determine the doses required to reduce the yeast and mold bioburden of raisins, walnuts, and dates. The indigenous yeast and mold bioburden on a select number of commodities sold at retail ranged from 10(2) to 10(3) CFU/g. E-beam inactivation kinetics based on the linear model suggest that the decimal reduction dose required to eliminate 90% of the microbial population (D10-value) of these indigenous fungal populations ranges from 1.09 to 1.59 kGy. Some samples, however, exhibited inactivation kinetics that were better modeled by a quadratic model. The results indicate that different commodities can contain molds and yeasts of varying resistance to ionizing radiation. It is thus essential for the dried fruit and nut industry to determine empirically the minimum E-beam dose that is capable of reducing or eliminating the bioburden of yeasts and molds in their specific commodities.     

Effectiveness of potassium lactate and sodium diacetate in combination with irradiation to control Listeria monocytogenes on frankfurters

ABSTRACT:  The use of antimicrobial ingredients in combination with irradiation is an effective antilisterial intervention strategy for ready-to-eat meat products. Microbial safety was evaluated for frankfurters formulated with 0% or 3% added potassium lactate/sodium diacetate solution and inoculated with Listeria monocytogenes before or after treatment with irradiation (0, 1.8, or 2.6 kGy). Frankfurters were stored aerobically or vacuum packaged and L. mo nocytogenes counts and APCs were determined while refrigerated. The incorporation of lactate/diacetate with or without irradiation had a strong listeriostatic effect for aerobically stored frankfurters. Outgrowth was suppressed and counts were not different from initial counts (5.2 log CFU/frank compared with 5.0 log CFU/frank); however, those without the additive increased steadily (5.4 to 9.3 log CFU/frank). Irradiation treatments alone had higher L. monocytogenes counts after 3 wk. For vacuum-packaged frankfurters, both the addition of lactate/diacetate and irradiation were effective at controlling growth after 8 wk. Large and incremental reductions in total counts were seen for irradiation treatments. Initial counts were reduced by 3 log CFU with the application of 1.8 kGy while 2.6 kGy decreased counts over 5 log CFU. These reductions were maintained throughout storage for lactate/diacetate-treated frankfurters. By 8 wk, L. monocytogenes counts on 1.8 and 2.6 kGy irradiated frankfurters without lactate/diacetate increased to 7.43 and 6.13 log CFU, respectively. Overall, lactate/diacetate retarded the outgrowth of L. monocytogenes on frankfurters throughout aerobic storage and the combination of irradiation and 3% lactate/diacetate reduced and retarded growth of L. monocytogenes , especially during the last 2 wk of vacuum-packaged storage.     

An improved PSF mapping method for EPI distortion correction in human brain at ultra high field (7T)

Object  

To further improve the quality and robustness of the point-spread function (PSF) mapping method for fully automatic and accurate correction of geometric distortions in EPI at ultra high field such as 7 Tesla with high fidelity.