PPARγ agonist DIM‐Ph‐4‐CF 3 , a template for RXRα agonist (E)‐3‐[5‐di(1‐methyl‐1H‐indol‐3‐yl)methyl‐2‐thienyl] acrylic acid: DIM‐Ph‐CF3 is reported to inhibit cancer growth independent of PPARγ and to interact with NR4A1. As both receptors dimerize with RXR, and natural PPARγ ligands activate RXR, DIM‐Ph‐4‐CF3 was investigated as an RXR ligand. It displaces 9‐cis‐retinoic acid from RXRα but does not activate RXRα. Structure‐based direct design led to an RXRα agonist.
Prospective motion correction using data from optical tracking systems has been previously shown to reduce motion artifacts in MR imaging of the head. We evaluate a novel optical embedded tracking system.
Materials and methods
The home-built optical embedded tracking system performs image processing within a 7T scanner bore, enabling high speed tracking. Corrected and uncorrected in vivo MR volumes are acquired interleaved using a modified 3D FLASH sequence, and their image quality is assessed and compared.
Results
The latency between motion and correction of the slice position was measured to be (19?±?5)?ms, and the tracking noise has a standard deviation no greater than 10???m/0.005° during conventional MR scanning. Prospective motion correction improved the edge strength by 16?% on average, even though the volunteers were asked to remain motionless during the acquisitions.
Conclusion
Using a novel method for validating the effectiveness of in vivo prospective motion correction, we have demonstrated that prospective motion correction using motion data from the embedded tracking system considerably improved image quality. 相似文献
AbstractThe one-step method for graphene oxide (GO) simultaneous reduction and carboxylation via ultraviolet irradiation in the inert atmosphere has been reported. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) data revealed that the proposed approach allows to obtain reduced graphene oxide (rGO) films, containing up to 10 at.% of carboxyl groups. The carboxyl groups concentration can be tuned within the range of 3 to 10 at.% by controlling the oxidation degree of the irradiated GO via the preliminary low-temperature air heating. Furthermore, no carboxylation effect is observed in the case of irradiation of the completely reduced GO films. This coincides with our previous results, validating the proposed model of GO carboxylation based on photoinduced conversion of basal-plane hydroxyl groups and ketones into carboxyl ones. Despite a different degree of carboxylation, all the obtained samples demonstrate almost complete elimination of basal plane groups and restoration of the graphene flakes aromatic structure. This fact is emphasized by the sheet resistance measurements, demonstrating that the obtained C-xy graphene exhibits high electrical conductivity. As a net result, the material obtained by the presented method shows promising applications in the manufacturing of biosensor transducers owing to both its conductive nature and presence of carboxyl groups, playing the role of the anchoring points for biomolecules. 相似文献
Development of spectroscopic prediction models via partial least squares regression (PLSR) suggests that model performance is highly affected by means of calibration and nature of the dataset. This study compares the predictive performance of PLSR models obtained by cross-validation and independent validation to quantify physico-chemical soil properties from their mid-infrared diffuse reflectance Fourier transform spectra (midDRIFTS) across two contrasting regions, Kraichgau (K) and Swabian Alb (SA), in Southwest Germany. We evaluated the capability of midDRIFTS-PLSR models for predicting total carbon (TC), organic carbon (TOC), inorganic carbon (TIC), nitrogen (TN), mineral N (Nmin), C:N ratio, hot water extractable C and N (CHWE, NHWE), microbial biomass C and N (Cmic, Nmic), pH, bulk density, and clay, silt and sand contents of 126 soil samples. Based on calibrated models, most soil properties were predicted successfully using either calibration approach with residual prediction deviations ≥3 and R2 > 0.9, except for Nmin, C/N ratio, pH, bulk density and sand. However, predictive performance of generic independent validation derived models (GIC) of test set was considerably higher than generic cross-validation models. Validation using GIC models gave relatively the same predictive performance with those obtained in calibration except for Nmin. Validation of region specific cross-validated models, however, resulted in successful predictions only for TC, TIC, TOC and TN in SA and TC and TIC and TOC in K. Our results show the superiority of independent validation over both generic and region specific cross-validation as a robust tool for predicting soil properties without further laboratory measurements. 相似文献
Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications. 相似文献
The thermal stability and decomposition mechanisms of Fe2AlB2 powders, synthesized by reactive powder metallurgy, were studied under nitrogen (N2) or argon (Ar) atmospheres. The effects of using different FeB precursors to synthesize the Fe2AlB2 and hydrochloric acid (HCl) purification treatments on the thermal stability were also investigated. When as-synthesized Fe2AlB2 powders are treated in dilute HCl to dissolve impurity phases, decomposition in N2 atmospheres occurs readily above 1200 K. The decomposition reaction involves β-FeB precipitation and the liberated Al atoms reacting with the ambient N2 to form AlN. Under Ar environments, HCl-treated Fe2AlB2 powders decompose and precipitate β-FeB, by the out-diffusion of Al from the nanolaminated structure. Interestingly, isothermal annealing under N2 atmospheres revealed that Fe2AlB2 was more thermally stable when synthesized from lab-synthesized, instead of commercially available, FeB precursors and when the HCl treatment was avoided. The effects of the various factors on the decomposition temperature and decomposition mechanisms are discussed herein. 相似文献
The instability of hybrid organic–inorganic perovskite (HOIP) devices is one of the significant challenges preventing commercialization. Exploring these phenomena is severely limited by the complexity of the intrinsic electrochemistry of HOIPs, the presence of multiple volatile and mobile ionic species, and the possible role of environmentally induced reactions at surfaces and triple‐phase junctions. Here, in situ studies of the electrochemistry of methylammonium lead bromide perovskite with the Au electrode interface are reported via light‐ and voltage‐dependent time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) imaging of lateral perovskite heterostructures. While ToF‐SIMS allows for the visualization of the chemical composition along the surface and its evolution with light and electrical bias, the interpretation of the multidimensional data obtained is often limited due to strong correlations between chemical signatures and the need to track multiple peaks at once. Here, a machine learning workflow combining the Hough transform and non‐negative matrix factorization and non‐negative tensor decomposition is developed to avoid this limitation and extract salient features of associated chemical changes and to separate the light‐ and voltage‐dependent dynamics. Combining these in situ characterizations and the machine learning workflow provides comprehensive information on the chemical nature of moving species, ion accumulation, and interfacial electrochemical reactions in HOIP devices. 相似文献