Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.     

Characterization of micromachined silicon rectangular waveguide at 400 GHz

We present the first characterization of a micromachined silicon rectangular waveguide at 400GHz. The silicon waveguide has an average loss of 0.086dB/mm for a range of 350-460GHz. The waveguides are formed using well known microfabrication techniques and demonstrate a successful first step towards the use of silicon waveguides as a viable option for THz systems.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

An integrated methodology to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes

Today, air pollution, smoking, use of fatty acids and ready‐made foods, and so on, have exacerbated heart disease. Therefore, controlling the risk of such diseases can prevent or reduce their incidence. The present study aimed at developing an integrated methodology including Markov decision processes (MDP) and genetic algorithm (GA) to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes. First, the efficiency of GA is evaluated against Grey Wolf optimization (GWO) algorithm, and then, the superiority of GA is revealed. Next, the MDP is employed to estimate the risk of cardiovascular disease. For this purpose, model inputs are first determined using a validated micro‐simulation model for screening cardiovascular disease developed at Tehran University of Medical Sciences, Iran by GA. The model input factors are then defined accordingly and using these inputs, three risk estimation models are identified. The results of these models support WHO guidelines that provide medicine with a high discount to patients with high expected LYs. To develop the MDP methodology, policies should be adopted that work well despite the difference between the risk model and the actual risk. Finally, a sensitivity analysis is conducted to study the behavior of the total medication cost against the changes of parameters.     

Efficient designs of reversible sequential circuits

The Journal of Supercomputing - Recently, the synthesis of reversible sequential circuits has attracted researchers’ attention for implementing low-power logic designs. So far, the direct and...     

Direct adaptive fuzzy control with membership function tuning

In this paper, a direct self‐structured adaptive fuzzy control is introduced for the class of nonlinear systems with unknown dynamic models. Control is accomplished by an adaptive fuzzy system with a fixed number of rules and adaptive membership functions. The reference signal and state errors are used to tune the membership functions and update them instantaneously. The Lyapunov synthesis method is also used to guarantee the stability of the closed loop system. The proposed control scheme is applied to an inverted pendulum and a magnetic levitation system, and its effectiveness is shown via simulation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Supplier selection using a novel intuitionist fuzzy clustering approach

Supplier selection is a complicated decision-making problem involving multicriteria, alternative and decision makers (DMs). The main purpose of this paper is to demonstrate the use of a clustering-based method to solve a group decision making (GDM) problem and, also to achieve more realistic and homogeneous results. Intuitionistic fuzzy value (IFV) is used to show the decision makers’ preferences and IFN clustering method is utilized to cluster around DM's preferences. Intuitionistic fuzzy weighted geometric (IFWG) is applied to aggregate the obtained clusters. Ranking process is used based on the two indices, score function and accuracy function, to rank the alternatives. Lastly, to demonstrate the efficiency of our proposed method, it is implemented to choose suppliers in a car factory.The strength of the propose approach is considering the group agreement on proposed DMs’ preferences for giving different effect on their judgment. Besides, encountering the qualitative judgment of DMs using IFV concept with score function and the accuracy function for modeling the DMs’ knowledge is the other contribution of this paper.     

Solving coupled matrix equations over generalized bisymmetric matrices

In this paper, an iterative algorithm is established for finding the generalized bisymmetric solution group to the coupled matrix equations (including the generalized (coupled) Lyapunov and Sylvester matrix equations as special cases). It is proved that proposed algorithm consistently converges to the generalized bisymmetric solution group for any initial generalized bisymmetric matrix group. Finally a numerical example indicates that proposed algorithm works quite effectively in practice.