Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.     

Chlorophyll adsorption on acid-activated clay

An acid-activated clay (Çanakkale montmorillonite from Turkey) was used to adsorb chlorophyll from hexane solutions. The phenomenon seems to be mainly driven by the interaction of chlorophyll with acid sites. The adsorption of chlorophyll on Brönsted acid sites was indicated by a characteristic infrared band for the -OH group at 3671 cm^?1. The variations in the structure of clay mineral and chlorophyll during adsorption have been examined by differential thermal analysis, thermogravimetry and infrared spectroscopy of the activated clay before and after adsorption of chlorophyll. Oxidation of adsorbed chlorophyll was completed at quite a high temperature.     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Improvement of Interfacial Adhesion of Glass Fiber/Epoxy Composite by Using Plasma Polymerized Glass Fibers

This study intends to produce plasma polymer thin films of γ-glycidoxypropyltrimethoxysilane (γ-GPS) on glass fibers in order to improve interfacial adhesion of glass fiber-reinforced epoxy composites. A low frequency (LF) plasma generator was used for the plasma polymerization of γ-GPS on the surface of glass fibers at different plasma powers and exposure times. X-ray photoelectron spectroscopy (XPS) and SEM analyses of plasma polymerized glass fibers were conducted to obtain some information about surface properties of glass fibers. Interlaminar shear strength (ILSS) values and interfacial shear strength (IFSS) of composites reinforced with plasma polymerized glass fiber were evaluated. The ILSS and IFSS values of non-plasma polymerized glass fiber-reinforced epoxy composite were increased 110 and 53%, respectively, after plasma polymerization of γ-GPS at a plasma power of 60 W for 30 min. The improvement of interfacial adhesion was also confirmed by SEM observations of fractured surface of the composites.     

FTIR and SEM analysis of polyester‐ and epoxy‐based composites manufactured by VARTM process

Polyester‐ and epoxy‐based composites containing glass and carbon fibers were manufactured using a vacuum‐assisted resin transfer molding (VARTM) process. Fourier transform infrared (FTIR) spectroscopy analyses were conducted to determine the interaction between fibers and matrix material. The results indicate that strong interaction was observed between carbon fiber and epoxy resin. However, weak interactions between remaining fiber‐matrix occur. Scanning electron microscopy (SEM) analysis was also performed to take some information about strength of interaction between fibers and matrix material. From SEM micrographs, it is concluded that the findings in SEM analysis support to that obtained in FTIR analysis. Another aim of the present work was to investigate the influence of matrix on composite properties. Hence, the strengths of composites having same reinforcement but different matrix systems in axial tension and transverse tension were compared. Short beam shear test has been conducted to characterize the interfacial strength in the composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure and Dielectric Properties of the Ba(Mg1/3Nb2/3)O3-La(Mg2/3Nb1/3)O3 System

A complete range of perovskite solid solutions can be formed in the (1 − x )Ba(Mg_1/3Nb_2/3)O₃- x La(Mg_2/3Nb_1/3)O₃ (BMN-LMN) pseudobinary system. While pure BMN adopts a 1:2 cation ordered structure, 1:1 ordered phases are stabilized for 0.05 ≤ x ≤ 1.0. Dark-field TEM images indicate that the La-doped solid solutions are comprised of large 1:1 ordered domains and no evidence was found for a phase-separated structure. This observation coupled with the systematic variations in the intensities of the supercell reflections supports a charge-balanced "random-site" model for the 1:1 ordering. The substitution of La also induces a transformation from a negative to positive temperature coefficient of capacitance in the region 0.25 ≤ x ≤ 0.5.     

Novel Amide-Based Cationic Surfactants as Efficient Corrosion Inhibitors for Carbon Steel in HCl and H2SO4 media

A variety of surface active compounds were synthesized by the quaternization of some straight chain amide derivatives with triethylamine or pyridine. Their structure FT-IR and ¹H-NMR spectra were recorded. In addition their physical properties and corrosion prevention efficiencies were investigated. All compounds were tested with steel coupons in acidic media by the gravimetric method. As acidic media 1.5 M HCl and 1.5 M H₂SO₄ were used and the corrosion inhibition tests fulfilled at room temperature for 24 h. Almost all prepared cationic surfactants showed efficient inhibition around their critical micelle concentrations. The effects of HCl concentration on corrosion inhibition of some synthesized compounds were also investigated. The corrosion tests were supported by contact angle measurements.     

Adsorption of Congo Red dye by native amine and carboxyl modified biomass of <Emphasis Type="Italic">Funalia trogii</Emphasis>: Isotherms,kinetics and thermodynamics mechanisms

Native, iminodiacetic acid and triethylenetetraamine modified biomasses of Funalia trogii were used for removal of Congo Red dye (CRD) from aqueous medium. The native and modified fungal biomasses were characterized using ATR-FTIR, Zeta potential, contact angle studies and analytical methods. FTIR studies of the native and chemically modified adsorbent preparations show that amine, carboxyl and hydroxyl groups are involved in the adsorption of the model dye (i.e., Congo Red). The maximum adsorption of the CRD on the native, carboxyl and amine groups modified fungal biomasses was obtained at pH 5.0. The amount of adsorbed dye on the adsorbent samples increased as the initial concentration of CRD in the solution increased to 200mg/L. The adsorption capacities of native, carboxyl groups and amine modified fungal preparations were 90.4, 153.6 and 193.7mg/g dry adsorbents, respectively. The data was fitted well with the Langmuir isotherm model, and followed the pseudo-second-order equations. Thermodynamic parameters (ΔG ^o , ΔH ^o and ΔS ^o ) were also calculated. The results showed that triethylenetetraamine (TETA) modified biomass of F. trogii presented an excellent dye removal performance and can be used in various environmental applications such as various micro-pollutants removal from aqueous medium.