Effect of processing method on microstructure,electrical conductivity and electromagnetic wave interference (EMI) shielding performance of carbon nanofiber filled thermoplastic polyurethane composites

In this study, effect of processing method on microstructure formation and related electrical conductivity and electromagnetic interference shielding effectiveness of carbon nanofiber (CNF) filled thermoplastic polyurethane (TPU) composites, prepared via three different processing techniques; (i) melt compounding (MC) in a twin screw extruder, (ii) simple solution mixing (SM) on a magnetic stirrer, and (iii) solution mixing with sonication (SM-U) were investigated. It was found that the electrical conductivity values of samples decreased in the order of SM > SM-U > MC for a particular amount of CNF. The electromagnetic test results showed that the samples prepared with SM and SM-U methods yielded higher total shielding effectiveness (SE_T) values than those prepared with MC. SE_T values of samples including of 20 phr of CNF prepared with MC, SM-U and SM methods were varied in the range of 10–30 dB, 20–60 dB and 20–80 dB, respectively within a frequency range of 1–12 GHz.     

Polyhedral oligomeric silsesquioxane-based hybrid networks obtained via thiol-epoxy click chemistry

A series of hybrid networks based on polyhedral oligomeric silsesquioxane (POSS) were prepared by thiol-epoxy click reaction using commercially available octakis-glycidyl-POSS (G-POSS), trimethylolpropane triglycidyl ether, and trimethylolpropane tris(3-mercaptopropionate) as monomers. The click reaction was simply catalyzed by lithium hydroxide which proceeded readily at ambient conditions in very good yields. The incorporation of G-POSS into the network was clearly determined by transmission electron microscopy, FTIR, and ¹H-NMR spectroscopy techniques performed with a model study using 1-butane thiol and G-POSS molecules. The homogeneous distribution of G-POSS up to 5 wt% in the hybrid network was apparently confirmed by morphological investigations. By increasing G-POSS content higher than 5 wt%, the heterogeneous dispersion of G-POSS was determined from the tensile strength measurements. The significant decrease in tensile strength was possible due to the agglomeration of G-POSS. On the other hand, thermal properties of hybrid networks were compared together by thermogravimetric analyses, where all samples exhibited one-step degradation in the range of 220–500 °C. The thermal decomposition of hybrid network led to complete degradation of the organic part and favored the formation of stable carbonaceous and inorganic residues as char. Thus, the char yields of hybrid networks were increased to 6.2, 7.8, 10.1, 12.7, and 15.1% by G-POSS loadings from 0 to 15 wt%. This improvement was also a proof of the incorporation of G-POSS into the hybrid networks that resulted in high heat-resistant POSS-based hybrid networks compared to a sample without G-POSS.     

Recovery of Zinc by LIX 984N‐C from Electroplating Rinse Bath Solution

The development of a complete solvent extraction process at the laboratory scale for recovering zinc from the zinc electroplating first rinse bath solution (alkali solution) containing ～1.9 g/L zinc (ZEFRBS) by a solvent extraction route using LIX 984N‐C, which is a new SX reagent developed by Cognis, and dissolved in commercial kerosene was investigated. By using LIX 984N‐C, an electrolyte from ZEFRBS with ～12 g/L zinc content, which was addable to the alkali zinc electroplating bath, was generated by 10 vol.% LIX 984N‐C in commercial kerosene at the O/A ratio of 1/4 and equilibrium pH value of 8.00 ± 0.05 with a two‐stage countercurrent extraction, and stripping of the loaded organic by a strip solution with 150 g/L sulfuric acid and with the O/A ratio of 1.5 at a two‐stage countercurrent stripping process. A new complete flow sheet of 10 vol.% LIX 984N‐C process for the recovery of zinc from ZEFRBS has been demonstrated.     

Dehydration,Water Vapor Adsorption and Desorption Behavior of Zn[B3O3(OH)5] · H2O and Zn[B3O4(OH)3]

The dehydration behaviors of two different hydrated zinc borate species, Zn[B₃O₃(OH)₅] · H₂O and Zn[B₃O₄(OH)₃], which are industrially important flame retardants, were studied by thermal gravimetric(TG) analysis and in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. Dehydration onset temperatures of Zn[B₃O₃(OH)₅] · H₂O and Zn[B₃O₄(OH)₃] were 129 and 320°C, respectively, at a 10°C/min ramp rate. A very small amount of boric acid was volatilized in addition to water vapor when both samples were heated at 250°C. A significant amount of water vapor was adsorbed by Zn[B₃O₃(OH)₅] · H₂O from air at 25°C. However, Zn[B₃O₄(OH)₃] adsorbed a very small amount of water under the same conditions. Both zinc borates did not have a tendency to cake during storage.     

Recent advances in the preparation of functionalized polysulfones

This review summarizes the studies related to chemical functionalization of polysulfones used in many different applications such as membranes with special functions, nanocomposites, biofilm formation, fuel cells etc. reported in recent years from the literature since 2000. Various strategies have been applied for the functionalization of polysulfones. One strategy is to add desired functionality into starting monomers in the solution containing the main components of commercial polysulfones, the aromatic dihalide sulfone and bisphenol monomers, or to functionalize the related monomers before the condensation. Another approach is to form difunctional polysulfone oligomers. Then, functional groups can be utilized to react with monomers or other polymers to obtain functional polymers or block copolymers. The most applied method is post‐modification of commercially available polysulfones by incorporation of functional groups to their aromatic groups and their use in the formation of graft polymers or polysulfone‐based networks. © 2013 Society of Chemical Industry     

The Impacts of Heat Treatment on Lap Joint Shear Strength of Black Pine Wood

This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to temperatures of 160, 180, and 200°C for durations of 2 and 6 hours. Specimens having two layers were prepared from untreated and treated wood for mechanical testing of bond lines. Data were analyzed using variance analysis and Tukey's test to determine the impacts of changes in density and mass of heat-treated black pine wood on lap shear strength. The results indicated that the lap shear strength of black pine wood decreased as the intensity of heat treatment increased. The results also indicated that the minimum and maximum percentage decreases of lap shear strength were approximately 27% for 160°C and 2 hours and 78% for 200°C and 6 hours.     

Improvement of Interfacial Adhesion of Glass Fiber/Epoxy Composite by Using Plasma Polymerized Glass Fibers

This study intends to produce plasma polymer thin films of γ-glycidoxypropyltrimethoxysilane (γ-GPS) on glass fibers in order to improve interfacial adhesion of glass fiber-reinforced epoxy composites. A low frequency (LF) plasma generator was used for the plasma polymerization of γ-GPS on the surface of glass fibers at different plasma powers and exposure times. X-ray photoelectron spectroscopy (XPS) and SEM analyses of plasma polymerized glass fibers were conducted to obtain some information about surface properties of glass fibers. Interlaminar shear strength (ILSS) values and interfacial shear strength (IFSS) of composites reinforced with plasma polymerized glass fiber were evaluated. The ILSS and IFSS values of non-plasma polymerized glass fiber-reinforced epoxy composite were increased 110 and 53%, respectively, after plasma polymerization of γ-GPS at a plasma power of 60 W for 30 min. The improvement of interfacial adhesion was also confirmed by SEM observations of fractured surface of the composites.     

OBTAINING SCARLET SAGE (SALVIA COCCINEA) EXTRACT THROUGH HOMOGENIZER- AND ULTRASOUND-ASSISTED EXTRACTION METHODS

Scarlet sage (Salvia coccinea) leaves were extracted with water, ethanol, methanol, and aqueous mixtures of those solvents by homogenizer-assisted extraction (HAE) and ultrasound-assisted extraction (UAE) methods, which are novel technologies used for this purpose. The best results were compared with those obtained by the conventional Soxhlet method (SM). Total phenolic content was expressed in gallic acid equivalent (GAE) per g of dried leaf. Free radical scavenging activity for the antioxidant capacity was tested by 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical. The greatest amount of extraction was achieved by pure water with the value of 368.87 mg/g dried matter and the highest total phenolic content was observed by 100% methanol as 43.18 mg-GAE/g dried matter, both obtained by the HAE method. The mint leaves extracted by SM exhibited the highest antioxidant capacity, with a value of 90.55% for inhibition of DPPH radical.     

Evaluation of antibacterial effects of contemporary orthodontic bonding materials

Aim: The aim of this study was to evaluate the antibacterial effects of five orthodontic bonding materials commonly used in orthodontics. Materials and Methods: The antibacterial effects of five orthodontic bonding materials were evaluated against Streptococcus mutans and Streptococcus salivarius by direct contact test (DCT). Using the DCT technique, quintet specimens of Transbond XT, Blugloo, Grengloo, Light Bond, and Opal Bond were applied to the bottom and the walls of the five wells of a 96-microtiter plate with a height of 2 mm. Samples were prepared in two sets: 1-day samples and 7-day samples. Ten microliters of bacterial suspension were added to each well for direct contact with each material for 1h at 37 °C. Bacterial growth was then measured in a microplate spectrophotometer hourly at 600 nm for 24 h. Five uncoated wells with identical inoculum sizes served as positive controls. The data obtained at the end of 24 h was statistically analyzed with one-way ANOVA, and post hoc comparisons were done using Tamhane’s T2 test. Results: Blugloo generally showed better antibacterial activity than the other materials. Transbond XT did not show any antibacterial activity. There was a statistically significant difference between Transbond XT and Light Bond in the 1-day sample against S. mutans (p < 0.05). No statistically significant differences were found among the other groups (p > 0.05). Conclusion: Blugloo had the most potent antibacterial activity against S. salivarious.     

Kinetic Investigation of Reaction Between Colemanite Ore and Methanol

In the field of industry, it is very important that boron compounds are produced from boron ores. The aim of this study was to investigate the dissolution kinetics with carbon dioxide of colemanite in methanol medium in a pressure reactor and to derive an alternative process for producing boron compounds. Reaction temperature, stirring speed, solid/liquid ratio, pressure, and particle size were selected as parameters for the dissolution rate of colemanite. It was found that the dissolution rate increased with increase in pressure and reaction temperature, and with decrease in particle size and solid/liquid ratio. No effect of stirring speed was observed on conversion. The dissolution kinetics of colemanite were examined using both heterogeneous and homogeneous reaction models, and it was determined that the reaction rate can be described by a second-order pseudo-homogeneous reaction model. The activation energy was found to be 51.4 kJ/mol.