Soluble semi-conductive chelate polymers containing Cr(III) in the backbone: Synthesis, characterization, optical, electrochemical, and electrical properties

Soluble kinds of coordination polymers containing Cr(III) ion in the backbone were synthesized. Structures of the polymers were characterized by FT-IR, UV-vis, ¹H and ¹³C NMR, and size exclusion chromatography (SEC). Thermal degradation data were obtained by TG-DTA and DSC techniques. Cyclic voltammetry (CV) measurements were carried out and the HOMO-LUMO energy levels and electrochemical band gaps were calculated. Additionally, the optical band gaps (E_g) were determined by using UV-vis spectra of the materials. Electrical conductivity measurements of doped (with iodine) and undoped polymers related to temperature were carried out by four-point probe technique using a Keithley 2400 electrometer. Measurements were made by using the polymeric films deposited on ITO glass plate by dip-coating method. Also, absorption spectra of doped polymeric films were recorded by a single beam spectrophotometer showing that doping procedure causes shifting in absorption spectra. Their abilities of processing in gas sensors were also discussed. According to obtained results the synthesized chelate polymers are semi-conductors having polyconjugated structures. Also, P-2 is the most electro-conductive polymer among the synthesized, while P-1 is the most thermally stable one.     

Cost analysis of seawater desalination with reverse osmosis in Turkey

Economically usable water resources per capita are decreasing due to excessive population increase each year in Turkey. For this reason, new water resources should be found in the near future. The potential water resources are seawater or well water both of which need removal of salinity. The most promising treatment method for salinity is reverse osmosis. While reverse osmosis becomes widespread, the cost of the process will decrease. There is no detailed information about cost of seawater desalination in Turkey. In this study, a cost analysis of seawater desalination in Turkey was performed for reverse osmosis systems. The basic parameters of cost analysis such as capacity, recovery, membrane life, energy, chemical costs and flux were evaluated based on the effects on capital, operating and total production costs.     

Comparison of textile dyeing effluent adsorption on commercial activated carbon and activated carbon prepared from olive stone by ZnCl2 activation

Adsorption of Remazol Red B on activated carbon prepared from olive stone and commercial activated carbon from aqueous solutions was compared. Different activating agent (ZnCl₂) amounts and adsorbent particle size were studied to optimize adsorbent surface area. The adsorptive property of commercial activated carbon and activated carbon prepared from olive stone were investigated in terms of adsorbent dose, temperature, equilibrium time and pH. Then the obtained results were compared for all parameters, According to the results, the equilibrium time, optimum pH, adsorbent dosage were found 60 min, pH < 3–4 and 1.0 g/50 ml respectively. Lower adsorption capacity for RRB on activated carbon prepared from olive stone was found. The kinetic data for both adsorbents supports pseudo-second order model (r² > 0.99) and intra-particle model (r² > 0.95) but the first order kinetic model did not adequately fit to the experimental values (r² < 0.76). The equilibrium adsorption data were interpreted using Langmuir and Freundlich models. The adsorption of Remazol Red B was better represented by the Langmuir equation. In addition, the thermodynamic parameters, standard free energy (ΔG°), standard enthalpy (ΔH°), standard entropy (ΔS°) of the adsorption process were calculated for both adsorbents. To reveal the adsorptive characteristics of the produced active carbon, surface area measurements were carried out and structural analysis was performed using SEM-EDS.     

FTIR and SEM analysis of polyester‐ and epoxy‐based composites manufactured by VARTM process

Polyester‐ and epoxy‐based composites containing glass and carbon fibers were manufactured using a vacuum‐assisted resin transfer molding (VARTM) process. Fourier transform infrared (FTIR) spectroscopy analyses were conducted to determine the interaction between fibers and matrix material. The results indicate that strong interaction was observed between carbon fiber and epoxy resin. However, weak interactions between remaining fiber‐matrix occur. Scanning electron microscopy (SEM) analysis was also performed to take some information about strength of interaction between fibers and matrix material. From SEM micrographs, it is concluded that the findings in SEM analysis support to that obtained in FTIR analysis. Another aim of the present work was to investigate the influence of matrix on composite properties. Hence, the strengths of composites having same reinforcement but different matrix systems in axial tension and transverse tension were compared. Short beam shear test has been conducted to characterize the interfacial strength in the composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The usability of (sodium alginate/acrylamide) semi-interpenetrating polymer networks on removal of some textile dyes

In this study, (sodium alginate/acrylamide) interpenetrating polymer networks ((NaAlg/AAm)IPN) have been prepared at definite composition. The aqueous solution of 3% (w/v) sodium alginate and 50% (w/v) acrylamide was irradiated with ⁶⁰Co-γ rays at a dose rate of 0.07 kGy/h up to 5 kGy. The percent conversion was determined gravimetrically and 100% gelation was achieved at 5 kGy dose. To understand whether the semi-interpenetrating polymer network of sodium alginate is performed, Fourier Transform Infrared (FTIR) spectra of polyacrylamide (PAAm), sodium alginate, and the semi-interpenetrating polymer network were recorded. It is found that the FTIR spectra of PAAm, NaAlg, and the semi-interpenetrating polymer network are different. The thermograms of PAAm, sodium alginate, and the semi-interpenetrating polymer network were recorded for investigating their thermal character. (NaAlg/AAm)IPN hydrogels were immersed to swell in a solution of pH 7, at a temperature of 25°C. The swelling results at pH 7.0 indicated that (NaAlg/AAm)IPN hydrogel, containing 3% NaAlg showed maximum % swelling in water but swelling increased in the order of water > Magenta > Methylene Blue > Safranine-O > Methyl Violet. Diffusion of water and aqueous solution of dyes within (NaAlg/AAm)IPN hydrogels was found to be of Fickian character at the initial stage of swelling with regard to values calculated for diffusion coefficient of (NaAlg/AAm)IPN hydrogels in water and aqueous solution of dyes. Some diffusion parameters were calculated from swelling of (NaAlg/AAm)IPN in water and dyes and their adsorption isotherms were plotted. In the adsorption experiments, the efficiency of (NaAlg/AAm)IPN hydrogels to adsorb Magenta, Safranine-O, Methylene Blue, and Methyl Violet dyes from water was studied. (NaAlg/AAm)IPN hydrogels showed different adsorption for different aqueous solution of dyes at pH 7.0. Adsorption isotherms were constructed for (NaAlg/AAm)IPN-dye systems. S type adsorption in the Giles classification system was found. Thermal and spectroscopic characterization of semi-interpenetrating polymer network of sodium alginate and acrylamide and dye adsorbed semi-interpenetrating polymer network of sodium alginate and acrylamide was recorded. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimization of stiffness, strength, and toughness is a challenge for any material, and commercial PLA is well-known to be inherently brittle and temperature-sensitive and to show poor melt elasticity. In this study, we report that high-shear mixing with cellulose nanocrystals (CNC) leads to significant improvements in the toughness, heat resistance, and melt elasticity of PLA while further enhancing its already outstanding room temperature stiffness and strength. This is evidenced by (i) one-fold increase in the elastic modulus (6.48 GPa), (ii) 43% increase in the tensile strength (87.1 MPa), (iii) one-fold increase in the strain at break (∼6%), (iv) two-fold increase in the impact strength (44.2 kJ/m²), (v) 113-fold increase in the storage modulus at 90°C (787.8 MPa), and (vi) 10³-fold increase in the melt elasticity at 190°C and 1 rad/s (∼10⁵ Pa) via the addition of 30 wt% CNC. It is hence possible to produce industrially viable, stiff, strong, tough, and heat resistant green materials with improved melt elasticity through high-shear mixing.     

Machining strategy development and parameter selection in 5-axis milling based on process simulations

Fused deposition modeling (FDM) is one of the most popular additive manufacturing technologies for fabricating prototypes with complex geometry and different materials. However, current commercial FDM machines have the limitations in process reliability and product quality. In order to overcome these limitations and increase the levels of machine intelligence and automation, machine conditions need to be monitored more closely as in closed-loop control systems. In this study, a new method for in situ monitoring of FDM machine conditions is proposed, where acoustic emission (AE) technique is applied. The proposed method allows for the identification of both normal and abnormal states of the machine conditions. The time-domain features of AE hits are used as the indicators. Support vector machines with the radial basis function kernel are applied for state identification. Experimental results show that this new method can potentially serve as a non-intrusive diagnostic and prognostic tool for FDM machine maintenance and process control.     

Surface Modification of Thermal Barrier Coatings by Single-Shot Defocused Laser Treatments

Thermal barrier coatings (TBC) consisting of atmospheric plasma-sprayed ZrO₂-8 wt.% Y₂O₃ and a high velocity oxygen fuel-sprayed metallic bond coat were subjected to CO₂ continuous wave laser treatments. The effects of laser power on TBCs were investigated as was the thermally grown oxide (TGO) layer development of all as-sprayed and laser-treated coatings after thermal oxidation tests in air environment for 50, 100, and 200 h at 1100 °C. The effects of laser power on TBCs were investigated. TGO layer development was examined on all as-sprayed and laser-treated coatings after thermal oxidation tests in air environment for 50, 100, and 200 h at 1100 °C. Melted and heat-affected zone regions were observed in all the laser-treated samples. Oxidation tests showed a stable alumina layer and mixed spinel oxides in the TGO layers of the as-sprayed and laser-treated TBCs.     

Methacrylate-functionalized POSS influence on cross-linking and mechanical properties of styrene-butadiene rubber

Iranian Polymer Journal - The addition of methacrylate-functional polyhedral oligomeric silsesquioxane (MA-POSS) nanoparticles to styrene-butadiene rubber (SBR) composites was evaluated in terms of...