Structure and Properties of Electroless Ni Deposits

The changes in structure and the hardness of two electroless deposited Ni-P alloy coatings (with P content of 1.5 and 9.5 wt pct) with heat treatment have been studied by XRD and TEM. The deposits containing 1.5 wt pct P can be represented as an fcc NiP supersaturated solid solution of 5~10 nm microcrystallites. whereas the deposits containing 9.5 wt pct P are amorphous. The heat treatment process induces crystallization of amorphous Ni to Ni phosphides and fcc Ni.Both of the deposits reach maximum hardness after annealing at 400℃ for 1 h. All coated steel specimens are inferior in fatigue strength to uncoated steel specimens mainly due to the poor fatigue resistance of the coating itself     

非线性系统鲁棒吸引的动态补偿方法

考虑非线性不确定系统的鲁棒吸引问题,借助于动态输出反馈,构造了两类控制律。这两类控制律分别可使相应的闭环系统被一任意小的区域鲁棒吸引,或被一预先设置的区域有限吸引。     

Method for error recovery of line spectral frequencies

The authors have exploited the ideas used in vector quantisation for error recovery of scalar quantised LSFs. The good performance of this method has provided high resistance of the LSFs to channel errors, outperforming other schemes by, possibly, a considerable margin. Better objective and subjective performances were obtained with this new method which obviates the need for more powerful FEC schemes for transmission over noisy channels.<>     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

利用ASP技术远程维护基于Web的光盘数据库

介绍了利用ASP技术对图书馆主页上的光盘数据库进行远程维护，给出整个实施过程的步骤及部分程序的源程序。     

新经济增长理论对我国人力资本发展的借鉴

新经济增长理论为人力资本理论注入了新的内容,为各国如何利用人力资本发展经济提供了理论指导。分析了新经济增长理论中有关人力资本的理论,以此对我国经济和人力资本的发展提出了一些借鉴;收益递增模型。     

源气体流量比对F-DLC薄膜结构的影响

以高纯石墨作靶，CHF3/Ar作源气体采用反应磁控溅射法制备出了氟化类金刚石（F-DLC）薄膜。拉曼光谱表明，CHF3相对流量的增加会引起薄膜的D峰与G峰强度之比I（D）/I（G）减小，晶粒增大，芳香环结构出例下降。红外吸收光谱分析证实了这些推论，指出这是由于薄膜中氟含量上升的结果。     

低温等离子体对血管内金属支架的表面改性

生物材料用于人体必须要具备生物相容性。尤其是与血液相接触的材料如血管内支架必须要具备血液相容性。材料的表面特性直接影响血液系统中是否会出现血栓。本文针对金属血管内支架的表面特性、与血液的界面反应以及用于提高血液相容性的低温等离子表面改性进行了简要综述     

溶胶-凝胶生物玻璃多孔材料显微结构和生物活性的扫描电镜及红外光谱分析

本文利用溶胶．凝胶法制备了CaO-P2O5-SiO，系统生物活性玻璃，并以其为原料制备了用于骨修复及骨组织工程支架的块状生物活性材料。利用体外实验方法(invitro)结合x射线衍射(XRD)、扫描电子显微镜(SEM)和傅立叶变换红外光谱分析(FTIR)技术对不同烧结工艺制备的材料结构、晶相和生物活性的影响进行了分析研究。研究表明，经800℃和1100℃烧结5min的两种材料均有硅磷酸钙Ca5(PO4)2SjO4微晶相析出。烧结温度越高，析出微晶相的体积比例越大，材料的生物活性则越低。在模拟生理溶液中碳酸羟基磷灰石(HCA)只在烧结体中的玻璃颗粒表面形成，而在其硅磷酸钙Ca5(PO4)2SiO4微晶相表面未发现HCA形成。