煤的大分子结构与超细物理结构研究(Ⅱ)煤的超细物理结构

回顾了煤的超细物理结构的x射线衍射研究,对散射强度的解析方法进行了评述。讨论了超细物理结构模型,以及在煤化过程中煤结构的变化。提出了多元非晶态和过渡态煤结构的概念。     

黄烷酮衍生物的合成及杀菌活性

以取代苯甲醛为起始原料 ,经过肉桂酸衍生物合成了 7个黄烷酮衍生物 ,它们的结构分别经IR和1 H NMR确证。通过生物测试表明 ,部分化合物具有较好的杀菌活性     

电除尘器分电场灰密度变化规律及粉煤灰密度与成份的关系

本文介绍粉煤灰经电除尘器分离后所得分电场灰密度沿电场方向的变化规律及影响因素，并阐述了粉煤灰密度与成份之间的关系。     

An adaptive watermarking scheme for e-government document images

This paper proposes an adaptive watermarking scheme for e-government document images. The adaptive scheme combines the discrete cosine transform (DCT) and the singular value decomposition (SVD) using luminance masking. As a core of masking model in the human visual system (HVS), luminance masking is implemented to improve noise sensitivity. Genetic algorithm (GA), subsequently, is employed for the optimization of the scaling factor of the masking. Involving a number of steps, the scheme proposed through this study begins by calculating the mask of the host image using luminance masking. It is then continued by transforming the mask on each area into all frequencies domain. The watermark image, following this, is embedded by modifying the singular values of DCT-transformed host image with singular values of mask coefficient of host image and the control parameter of DCT-transformed watermark image using Genetic Algorithm (GA). The use of both the singular values and the control parameter respectively, in this case, is not only to improve the sensitivity of the watermark performance but also to avoid the false positive problem. The watermark image, afterwards, is extracted from the distorted images. The experiment results show the improved adaptive performance of the proposed scheme is in resistant to several types of attacks in comparison with the previous schemes; the adaptive performance refers to the adaptive parameter of the luminance masking functioned to improve the performance or robustness of an image from any attacks.     

Stabilization And Tracking Of Underactuated Surface Vessels In Random Waves With Fin Based On Adaptive Hierarchical Sliding Mode Technique

Trajectory tracking and roll stabilization are both vital practices in ship motion control. Trajectory tracking is a kind of low‐frequency control, while roll stabilization by means of fins is a kind of high‐frequency control. However, they have been studied separately previously; most tracking control of underactuated surface vessels in the previous studies do not account for roll stabilization by means of fins. In reality, however, they are an integral system. In this paper, a simple control strategy is proposed to achieve trajectory tracking and fin roll stabilization simultaneously. Four degrees of freedom derived from a six degrees of freedom mathematical model of a surface vessel is considered, including surge, sway, roll and yaw. Surge force, roll moment and yaw moment are considered as control inputs, while position, yaw angle and roll angle are controlled. The number of control inputs is fewer than the outputs to be controlled. Therefore, we are dealing with an underactuated problem. An adaptive hierarchical sliding mode control technique is employed to deal with the underactuation. Stabilization of underactuated surface vessels is studied as a special case. Random waves are applied to test the robustness of the designed controllers. Lyapunov stability theory is used to show the stability of closed‐loop system. The simulation results verify the effectiveness of the proposed strategy.     

Electrophoretic Deposition of YSZ Particles on Non-Conducting Porous NiO–YSZ Substrates for Solid Oxide Fuel Cell Applications

This paper reports a method of performing electrophoretic deposition (EPD) on non-conducting substrates overcoming the requirement of a conducting substrate through the use of porous substrates. The conductivity of the substrate is therefore no longer a limiting factor in the application of EPD. This method is applicable to the fabrication of thick or thin layers of ceramic or metal for various applications. As an example, thin and dense yttria-stabilized zirconia (YSZ) layers have been deposited on a non-conducting NiO–YSZ substrate by EPD from a non-aqueous suspension. A solid oxide fuel cell constructed on these sintered bilayers exhibited power densities of 384 and 611 mW/cm² at 750° and 850°C, respectively.     

基于遥感和模糊数学的矿山地质环境综合评价研究-以红格钒钛磁铁矿区为例

利用IKONOS影像对红格钒钛磁铁矿区的矿山地质环境进行监测,结合实地调查资料,利用模糊数学综合评价法建立了研究区的评价指标体系,并对研究区矿山地质环境进行了综合评价。以研究区内5个规模较大的矿山为评价单元,得到白草铁矿、潘家田铁矿和小黑箐铁矿的矿山地质环境评价等级为Ⅰ(好),优于阳雀箐铁矿的Ⅱ(一般)和红格铁矿的Ⅲ(较差)。研究成果可为矿山地质环境评价、矿产资源合理开发及矿山生态环境综合整治等工作提供参考。     

优化变形能的平面多边形同构剖分

平面多边形间的同构三角剖分是平面形状渐进过渡与插值的基础,降低对应三角形的变形程度是获得高质量应用的关键.文中提出一种基于变形能优化的2个平面多边形的同构剖分算法,其中包含同构剖分生成和变形能最小化2个模块.首先根据用户指定的对应特征点对多边形进行顶点重采样,得到顶点一一对应的2个多边形;然后利用带约束的Delaunay剖分对其中的一个多边形进行三角化,得到源网格;再用重心坐标将源网格的内部顶点嵌入到另一个多边形得到同构剖分(目标网格);最后逐一检查三角形的变形能,对源网格中变形能超过阈值的三角形进行细分,用同构剖分模块生成新的目标网格.实验及数据统计分析表明,该算法可以得到较好的同构三角剖分,提升网格质量,并能很好地避免纹理细节失真.     

Oxygen enrichment from air through multilayer thin low‐density polyethylene films

Several multilayer thin low‐density polyethylene (LDPE) films were fabricated by blown thin film having a thickness of 7 μm and an area of 130 cm². They were characterized for their oxygen‐enrichment performance from air by a constant pressure–variable volume method in a round permeate cell with an effective area of 73.9 cm². The relationship between oxygen‐enrichment properties, including oxygen‐enriched air (OEA) flux, oxygen concentration, permeability coefficients of OEA, oxygen, nitrogen, as well as separation factor through the multilayer LDPE films, and operating parameters, including transfilm pressure difference, retentate/permeate flux ratio, temperature, as well as layer number, are all discussed in detail. It is found that all of the preceding oxygen‐enrichment parameters increase continuously with an increase of transfilm pressure difference from 0.1 to 0.65 MPa, especially for the trilayer and tetralayer LDPE films. The oxygen concentration and separation factor appear to rapidly increase within the retentate/permeate flux ratio below 200, and then become unchangeable beyond that, whereas the OEA flux and the permeability coefficients of OEA, oxygen, and nitrogen seem to remain nearly constant within the whole retentate/permeate flux ratio investigated, especially for the monolayer and bilayer LDPE films. The selectivity becomes inferior, whereas the permeability becomes superior, as the operating temperature increases from 23 to 31°C. The highest oxygen concentration was found to be 44.8% for monolayer LDPE film in a single step with air containing oxygen of 20.9% as a feed gas and operating pressure of 0.5 MPa at a retentate/permeate flux ratio of 340 and 23°C. The results demonstrate a possibility to prepare an oxygen‐enriching membrane directly from air, based on the easily obtained thin LDPE films. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3013–3021, 2002; DOI 10.1002/app.2331     

超细CaCO3与金属氧化物M2O3对Al/AP/HTPB推进剂燃烧的催化协同效应研究

对超细及市售ＣａＣＯ３在低含量（≤１％）的情况下对丁羟推进剂燃烧性能的影响进行了研究，结果发现ＣａＣＯ３低含量时可提高推进剂的燃速且超细ＣａＣＯ３比市售ＣａＣＯ３的催化效率高。进一步研究了超细ＣａＣＯ３与金属氧化物Ｍ２Ｏ３组合对推进剂燃烧的催化作用，结果表明两者有协同效应，其组合的燃烧催化效果较各自单独使用的催化效果要好。