模拟集成温度传感器设计

介绍了一种模拟集成温度传感器的电路设计。该电路利用双极性晶体管基极-发射极结压降与热力学温度T成比例的关系来实现温度的测量,并在6μm双极工艺线上投片成功。该电路在常温25℃下输出298.2μA的电流,在-55℃～150℃的工作温度范围内的误差不超过±3℃,非线性度误差不超过±0.4℃。     

台儿庄城区饮用水水源地水质放射性水平分析

为了解和掌握台儿庄城区饮用水水源地放射性水平和动态变化,本文以枣庄市生态环境局台儿庄分局提供的饮用水水源地水质放射性数据为基础,探讨了台儿庄城区饮用水水源地水质中α、β放射性质量浓度的动态变化。结果显示:水源地总α、β放射性质量浓度均低于标准限值,总α放射性质量浓度小于总β放射性质量浓度,总α、β放射性水平在水源地和季节变化中差异均不显著(P>0.05)。水源地水质总放射性水平符合我国规定的饮用水指导值。     

Fuzzy local maximal marginal embedding for feature extraction

In graph-based linear dimensionality reduction algorithms, it is crucial to construct a neighbor graph that can correctly reflect the relationship between samples. This paper presents an improved algorithm called fuzzy local maximal marginal embedding (FLMME) for linear dimensionality reduction. Significantly differing from the existing graph-based algorithms is that two novel fuzzy gradual graphs are constructed in FLMME, which help to pull the near neighbor samples in same class nearer and nearer and repel the far neighbor samples of margin between different classes farther and farther when they are projected to feature subspace. Through the fuzzy gradual graphs, FLMME algorithm has lower sensitivities to the sample variations caused by varying illumination, expression, viewing conditions and shapes. The proposed FLMME algorithm is evaluated through experiments by using the WINE database, the Yale and ORL face image databases and the USPS handwriting digital databases. The results show that the FLMME outperforms PCA, LDA, LPP and local maximal marginal embedding.     

Semi‐Global Output Feedback Stabilization for a Class of Uncertain Nonlinear Systems

This paper addresses the problem of semi‐global stabilization by output feedback for a class of nonlinear systems whose output gains are unknown. For each subsystem, we first design a state compensator and use the compensator states to construct a control law to stabilize the nominal linear system without the perturbing nonlinearities. Then, combining the output feedback domination approach with block‐backstepping scheme, a series of homogeneous output feedback controllers are constructed recursively for each subsystem and the closed‐loop system is rendered semi‐globally asymptotically stable.     

Augmented Lyapunov functional approach for stability of neutral systems with mixed delays

This paper is concerned with the neutral‐delay‐dependent and discrete‐delay‐dependent stability for uncertain neutral systems with mixed delays and norm‐bounded uncertainties. Through constructing a new augmented Lyapunov‐Krasovskii functional and proving its positive definiteness, introducing some slack matrices and using integral inequality, the improved delay‐dependent stability criteria are derived in terms of linear matrix inequalities. Numerical examples are given to illustrate the significant improvement on the conservatism of the delay bound over some existing results. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Improved stability conditions for systems with interval time-varying delay

The paper is concerned with the stability of linear systems with interval time-varying delay. Through constructing a new augmented Lyapunov-Krasovskii functional (LKF) which contains some quadruple-integral terms and estimating the time derivative of the LKF less conservatively, new stability criteria are derived without introducing any free matrices. Moreover, by proving the positive definiteness of the LKF with some integral inequalities, the constraints on some functional parameters are relaxed and the conservatism of the obtained results are further reduced. Numerical examples are also given to demonstrate the effectiveness and reduced conservatism of the obtained results.     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

离子液体改性花生壳对铬离子的吸附行为与机制

研究了用离子液体改性花生壳,并考察了改性花生壳对Cr(Ⅵ)的吸附行为与机制.结果表明:在改性花生壳用量10 g/L、温度50℃、初始Cr(Ⅵ)质量浓度10 mg/L条件下,改性花生壳对Cr(Ⅵ)的吸附率达99.82％;吸附过程符合Langmuir等温吸附模型,为单分子层吸附,吸附发生在均匀的吸附点位上,理论最大吸附量qm=9.70 mg/g;RL=0.221<1,表明吸附过程为优惠吸附;吸附过程符合准二级动力学模型,动力学常数k2=0.0452 g/(mg·min),理论平衡吸附量qe=1.14 mg/L,表明吸附过程主要为化学吸附.     

添加硫酸锰对化学镀Co-Fe-P合金结构禾口磁性台皂的影响

借助扫描电镜、能谱分析、X射线衍射和振动样品磁强计研究了添加硫酸锰对Co-Fe-P合金沉积速率、结构和磁性能的影响.结果表明,少量的硫酸锰有利于Co-Fe-P镀层的沉积,但过量时会降低沉积速率.当镀液中添加的硫酸锰浓度小于0.02 mol-L-1时对镀层组成几乎没有影响,但随着其浓度进一步增大至0.04 mol·L-1,镀层组成发生显著的变化.硫酸锰对该镀层具有整平作用,而且可使镀层中颗粒细化;硫酸锰有利于镀层形成非晶或微晶态结构.硫酸锰还可以改善Co-Fe-P合金膜的磁性能.