Determining of heat balance design criteria for laying hen houses under continental climate conditions

This study focuses on the heat balance status of laying hen houses in regions with continental climate. The material consists of 45 laying hen houses from 27 commercial farms selected from the survey area where continental climate prevails. These laying hen houses differ from each other with respect to capacity, planning system and materials used in construction. First observations were conducted on the size and dimensions of laying hen houses as well as construction materials used, insulation, heat loss factors, ventilation capacity, ground space per hen and total size of laying hen house in order to assess the sufficiency of heat balance. Then, seven laying hen house models were developed. These models were developed by considering the present situation in operating laying hen houses, relevant literature, features of continental climate and suggestions made by firms manufacturing laying hen house construction materials in Turkey. These models give heat conduction coefficients that will prevent moisture concentration and ensure heat balance under continental climate conditions and suggest different sets of materials that can be used on walls and roofs. At the end of the study, under the condition of no moisture on surface of structural components and in areas where the indoor and outdoor temperatures are 25.3 °C and 20.2 °C, respectively, maximum total heat conduction coefficients are calculated to be between 1.38 and 1.73 Kcal/m² °C h. According to the features of area and housing, for providing heat balance, total heat conduction coefficients requirements are calculated to be between 0.62 and 2.08 Kcal/m² °C h for walls, 0.33 and 1.62 Kcal/m² °C h for roofs. In research area, minimum ventilation capacities are determined as 0.72 m³/h hen for carbon dioxide balance and, according to outdoor temperature, as 0.83–1.20 m³/h hen for water vapor balance. Heat loss factors are calculated to be between 0.10 and 0.15 Kcal/°C h hen. We believe that these suggestions will greatly facilitate the work of project engineers in the design of laying hen houses in regions and areas with continental climate.     

Removal of trivalent chromium from water using low-cost natural diatomite

Trivalent chromium was removed from the artificial wastewater using low-cost diatomite in batch and continuous systems. In batch system, four different sizes and five different amount of sorbent were used. The effect of the temperature on sorption was evaluated with using three different temperatures. As a result of the experiments, 85% of the trivalent chromium was removed from the wastewater in conditions of using 1.29 mm grain material at 30 °C temperature for 60 min in batch system but chromium removal was 82% at 30 °C temperature for 22 min and 97% from the wastewater at 30 °C temperature for 80 min in continuous system. Also, the equilibrium adsorption isotherms have been analyzed by Langmuir and Freundlich models. The Langmuir isotherms have the highest correlation coefficients. Langmuir adsorption isotherm constants corresponding to adsorption capacity, q₀, were found to be 28.1, 26.5 and 21.8 mg Cr³⁺/g diatomite at 15, 30 and 45 °C, respectively. Adsorption process was an exothermic process as a result of thermodynamic parameters calculations. The kinetic data of the sorption showed that the pseudo second-order equation was the more appropriate, which indicate that the intraparticle diffusion is the rate-limiting factor.     

Transition metal cations extraction by ester and ketone derivatives of chromogenic azocalix[4]arenes

The molecule of azocalix[n]arene is a macrocyclic used effectively in the complexation of the heavy metal pollutants (like silver and mercury). In this work, our main aim is to prepare new chromogenic azocalix[n]arene molecules to elaborate an extractant with high extractant selectivity for metal ions able to detect this type of pollutant. The solvent extraction properties of four acetyls, four methyl ketones and four benzoyls derivatives from azocalix[4]arenes which were prepared by linking 4-ethyl, 4-n-butyl, 4-acetamid anilin and 2-aminothiazol to calix[4]arene through a diazo-coupling reaction, the alkaline earth (Sr2+) and the transition (Ag+, Hg2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Cr3+) metal cations have been determined by extraction studies with metal picrates. Both ketones are better extractants than esters, and show a strong preference for Ag+, while Cu2+ and Cr3+ are the most extracted cation with the esters. Both acetyl and benzoyl esters are good carriers for Ag+ and Hg2+.     

Thermal analysis of isothermal crystallization kinetics in blends of cocoa butter with milk fat or milk fat fractions

The kinetics of isothermal crystallization of binary mixtures of cocoa butter with milk fat and milk fat fractions were evaluated by applying the Avrami equation. Application of the Avrami equation to isothermal crystallization of the fats and the binary fat blends revealed different nucleation and growth mechanisms for the fats, based on the Avrami exponent. The suggested mechanism for cocoa butter crystallization was heterogeneous nucleation and spherulitic growth from sporadic nuclei. For milk fat, the mechanism was instantaneous heterogeneous nucleation followed by spherulitic growth. For milk fat fractions, the mechanism was high nucleation rate at the beginning of crystallization, which decreased with time, and plate-like growth. Addition of milk fat fractions did not cause a significant change in the suggested nucleation and growth mechanism of cocoa butter.     

Exergetic analysis of an LPG evaporator/regulator with thermal storage

In this study, the efficiency of an LPG evaporator/regulator (E/R) is investigated on both energy and exergy concept. The E/R, which is a key part of LPG conversion systems that enables gasoline engines to be operated on LPG when desired, has been transformed to a thermal energy storage (TES) system using an adequate amount of phase change material (PCM) to be able to store waste energy of the engine coolant, so that the engine can be operated on LPG rather than gasoline even at cold start to decrease fuel consumption and exhaust emissions. The engine has been tested at idle speed at 4 °C environment temperature. The PCM application provided the engine to be operated on LPG at cold start and increased the efficiency of the E/R in a considerable extent on both energy and exergy bases. It was observed that using PCM in the E/R for thermal storage, the net efficiency differences of the E/R with PCM application reach to the values of 20% and 10%, respectively for the energy and exergy calculations. The net 2nd law efficiencies were lower than the ones that of 1st law with the values of about 11% for gasoline operation, and 8% for LPG operation of the engine.     

The effects of hypercapnia on early and later phases of phrenic neurogram during early maturation

In this paper, we investigate the influence of hypercapnia on the early and late phases of the phrenic neurogram using the matching pursuit (MP) method in the decebrated piglets. The phrenic neurogram was recorded from 8 piglets (4-7 days old) during control (40% O2 with 5% end-tidal CO2), the mild hypercapnia (40% O2 with 7% end-tidal CO2), and the severe hypercapnia (40% O2 with 15% end-tidal CO2). The time-frequency representations, atoms, of the phrenic neurogram are calculated from the 5 consecutive phrenic neurogram burst for each piglet for each condition using the MP method after vagotomy and chemodenervation. Our results show that the energy percentage of atoms representing the nonperiodic neural activities (NPNAs) significantly increased when the CO2 concentration was shifted from 7% to 15% in the early phase (the first half) of the phrenic neurogram. In addition, the energy percentage of atoms representing the periodic neural activities (PNAs) decreased in the late phase (the second half) when the CO2 concentration was shifted from 7% to 15% (p < 0.01). As a summary, our result suggest that hypercapnia results in significant changes in the phrenic neurogram, an output of the respiratory neural networks in the medulla, both in time and frequency domians during early maturation.     

Concentration of phenolic compounds from apple pomace extracts by nanofiltration at lab and pilot scale with a techno‐economic assessment

Apple pomace can be used as resource for the extraction of phenolic compounds with antioxidant properties. Pressing of apple in juice and pomace at lab scale in open air (aerobic) and under N₂ atmosphere (anaerobic) showed a recovery of phenolic compounds of 85% in juice and pomace after anaerobic pressing, compared to 43% after aerobic pressing, indicating loss of phenolic compounds by oxidation and the advantage of anaerobic over aerobic pressing. After a membrane screening and concentration test at lab scale, the commercial nanofiltration membrane NFX was selected to concentrate phenolic compounds in an ethanol : water extract of apple pomace. At pilot scale, the concencentration of 10 selected phenolic compounds and quinic acid increased from 59.5 mg/L in the ethanol : water extract to 1256.1 mg/L in the final retentate, that is, by a factor 21.1. The volume of the crude extract was reduced by a factor of 28.5 during the filtration, indicating some loss of phenolic compounds during pilot testing due to membrane fouling or oxidation of polyphenols. The pilot concentration test using a spiral‐wound membrane module showed good flux and concentration of phenolic compounds, indicating the technical feasibility of membrane technology for efficient concentration of polyphenols in an ethanol : water extraction solvent. Unfortunately, the extraction and concentration process was not economically feasible under the assumptions made.

Practical applications

The valorization of food waste for the production of high‐added value products is an increasingly hot topic. Phytochemicals are present in relatively low concentration in the fruit matrix, and concentration in the extraction solvent is necessary to develop an industrially relevant process. In this study, membrane filtration was selected for concentration due to its low energy consumption and mild processing conditions compared to other technologies. Membrane screening and testing at lab and pilot scale with techno‐economic assessment can be used by food and nutraceutical industries to evaluate membrane technology for concentration of phytochemicals extracted from agroindustrial by‐products.     

Planning of capacity,production and inventory decisions in a generic reverse supply chain under uncertain demand and returns

There is a growing interest for the design and operation of reverse supply chain systems due to the cost and the legislation issues. In this paper, we address the disassembly, refurbishing and production operations in a reverse supply chain setting for modular products such as computers and mobile phones considering the uncertainties in this system, which are the return amounts of the used products and demand for final products. We develop a large-scale mixed integer programming model in order to capture all characteristics of this system, and use two-stage stochastic optimisation and robust optimisation approaches to analyse the system behaviour. In the first stage, we focus on the strategic decisions about the capacities at disassembly and refurbishing sites considering different scenarios regarding the uncertainties in the system. In the second stage, we analyse the operational decisions such as production, inventory and disposal rates. We observe through our extensive numerical analysis that the randomness of demand and return values effect the performance of the system substantially and the uncertainty of the return amounts of used products is much more important than the uncertainty of demand in this system.