Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Working Memory Capacity and the Antisaccade Task: Individual Differences in Voluntary Saccade Control.

Performance on antisaccade trials requires the inhibition of a prepotent response (i.e., don't look at the flashing cue) and the generation and execution of a correct saccade in the opposite direction. The authors attempted to further specify the role of working memory (WM) span differences in the antisaccade task. They tested high- and low-span individuals on variants of prosaccade and antisaccade trials in which an eye movement is the sole requirement. In 3 experiments, they demonstrated the importance of WM span differences in both suppression of a reflexive saccade and generation of a volitional eye movement. The results support the contention that individual differences in WM span are not exclusively due to differences in inhibition but also reflect differences in directing the focus of attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Web-based systems design: a study of contemporary practices and an explanatory framework based on “method-in-action”

This paper reports the findings of a detailed study of Web-based systems design (WBSD) practices in Ireland based on data collected over a 3-year period (2002–2005), the objectives of which were to (1) contribute towards a richer understanding of the current “real-world” context of WBSD by characterising the profile of a typical project (team size, timeframe, nature of requirements, etc.) and identifying the key challenges, constraints, and imperatives (i.e. “mediating factors”) faced by Web-based system designers, and (2) understand how those contextual parameters and mediating factors influence the activity of WBSD as regards the selection and enactment of whatever design practices are therefore engaged (i.e. the use of methods, procedures, etc.). Data was gathered through a survey which yielded 165 usable responses, and later through a series of semi-structured qualitative interviews. Using grounded theory, an explanatory conceptual framework is derived, based on an extension of the “method-in-action” model, the application of which to WBSD has not been previously investigated in depth. It is proposed that this framework of WBSD issues is valuable in a number of ways to educators, researchers, practitioners, and method engineers.     

The spatial economics of geothermal district energy in a small, low-density town: a case study of Mammoth Lakes, California

This research focuses on the spatial economics of geothermal district energy (DE) systems that distribute hot fluids through a pipeline network to multiple thermal customers. We argue here that DE is held back by uncertainty about its economic feasibility when implemented in real places. DE works best with high urban densities, but in the US the best geothermal resources are in the less-populated west. Economic geography theory suggests that the optimal size of a DE firm's service area should depend on the trade-off between the economies of scale inherent in a large service area and the greater network development costs and heat loss involved in serving a large area. The HEATMAP© software program developed by Washington State University was used to study the feasibility of numerous scenarios for a proposed DE system in Mammoth Lakes, California. Results indicate that the core area of the town is large enough, dense enough, and in close enough proximity to the resource for profitable DE development. Proposed ski village developments would increase the thermal load density and significantly enhance its ability to remain competitive with other fuels, even in pessimistic sensitivity analyses regarding geothermal heat input costs, public participation, and retro-fitting costs.     

Bedload Transport in Alluvial Channels

Hydraulic, sediment, land-use, and rock-erosivity data of 22 alluvial streams were used to evaluate conditions of bedload transport and the performance of selected bedload-transport equations. Transport categories of transport-limited (TL), partially transport-limited (PTL), and supply-limited (SL) were identified by a semiquantitative approach that considers hydraulic constraints on sediment movement and the processes that control sediment availability at the basin scale. Equations by Parker et al. in 1982, Schoklitsch in 1962, and Meyer-Peter and Muller in 1948 adequately predicted sediment transport in channels with TL condition, whereas the equations of Bagnold in 1980, and Schoklitsch, in 1962, performed well for PTL and SL conditions. Overall, the equation of Schoklitsch predicted well the measured bedload data for eight of 22 streams, and the Bagnold equation predicted the measured data in seven streams.     

Scalar network analysers operating at Ka- and W-bands

Scalar network analysers measuring the amplitude of the reflection/transmission coefficients of waveguide structures have been realised at Ka- and W-bands. Their accuracy derived by using standard mismatches is excellent at Ka- band and fairly good at W-band. To our knowledge this is the first instance where the accuracy of measurements obtained from a scalar network analyser was checked over full waveguide bands with the aid of standard mismatches. The reported reflectometers are precursors of vector network analysers based on six-port reflectometers. Methods aimed at increasing the signal-to-noise ratio (SNR) of the measurements have been developed, while proposals for improving the dynamic range of these network analysers are put forward.     

Delamination Resistant Zinc Alloys: Simple Concept and Results on the System Zinc‐Magnesium

Alloying zinc coatings with elements such as magnesium and titanium increases the corrosion resistance in industrial tests. Based on the fundamental mechanism of cathodic delamination, a simple concept how alloying zinc with specific elements might improve its resistance to cathodic delamination is presented in this paper. As an example, results concerning the delamination of a simple polymer from the zinc‐magnesium intermetallic MgZn₂ are presented. From electrode potential measurements obtained with the Scanning Kelvin Probe it can be concluded that cathodic delamination from this alloy is completely inhibited. This behaviour is attributed to the electronic properties of the magnesium‐rich oxidic passive layer, that inhibits the oxygen reduction reaction at the metal oxide/polymer interface.     

Novel amplified fiber-optic recirculating delay line processor

The application of optical amplifiers (OAs) to fiber-optic delay line signal processing is demonstrated. Both erbium-doped fiber amplifiers (EDFAs) and semiconductor optical amplifiers (SOAs) are applicable. Analytical results are presented for both amplified and unamplified fiber-optic recirculating delay lines (AFORDLs and UFORDLs). In the AFORDL an OA is inserted in the fiber loop. It is shown that the active AFORDL structure is capable of realizing all-fiber filters not possible with the passive UFORDL. This result is significant because it shows that the OAs can function beyond just the trivial optical loss compensation to provide extra flexibility not available in passive designs. An AFORDL design is presented which has a pole near +1 and a zero at -1 in the Z-plane resulting in useful characteristics in the magnitude and phase responses. The results suggest that extension of the concept to higher-order filters has the potential to lead to the realization of more complex optical processors     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.