Functionalized-radiolabeled hydroxyapatite/tenorite nanoparticles as theranostic agents for osteosarcoma

Hydroxyapatite (HA) nanoparticles (NPs) doped with different radioisotopes for use as theranostic systems play an important role in scientific research nowadays due to their ability to simultaneously act in the treatment and diagnosis of various types of cancers. In this work, we describe the synthesis and characterization of a hydroxyapatite/tenorite nanocomposite functionalized with folic acid, representing a nanotheranostic material with potential for application as an agent in positron emission tomography imaging systems and to act specifically in the treatment and diagnosis of osteosarcoma. ⁶⁴Cu and ³²P were produced by nuclear activation in the TRIGA reactor at CDTN. The obtained samples were characterized by XRD with Rietveld refinement, XAFS, SEM, BET, TGA, FTIR, CHN, ICP-AES, XPS and gamma spectroscopy. We investigated how CuO grows in HA NPs, the stability of the interactions between CuO and HA constituents and the interactions between folic acid and the surface of the HA NPs. The results indicate the formation of a second phase (tenorite) besides hydroxyapatite, and that the interactions between the two phases are stable, resulting in a nanocomposite. Furthermore, the activation of ⁶⁴Cu and ³²P inside the HA matrix, through the exposition to a neutron flux, produces a theranostic material of interest for biological tests.     

Synthesis and Antiplasmodial Activity of Novel Chloroquine Analogues with Bulky Basic Side Chains

Chloroquine is commonly used in the treatment and prevention of malaria, but Plasmodium falciparum, the main species responsible for malaria‐related deaths, has developed resistance against this drug. Twenty‐seven novel chloroquine (CQ) analogues characterized by a side chain terminated with a bulky basic head group, i.e., octahydro‐2H‐quinolizine and 1,2,3,4,5,6‐hexahydro‐1,5‐methano‐8H‐pyrido[1,2‐a][1,5]diazocin‐8‐one, were synthesized and tested for activity against D‐10 (CQ‐susceptible) and W‐2 (CQ‐resistant) strains of P. falciparum. Most compounds were found to be active against both strains with nanomolar or sub‐micromolar IC₅₀ values. Eleven compounds were found to be 2.7‐ to 13.4‐fold more potent than CQ against the W‐2 strain; among them, four cytisine derivatives appear to be of particular interest, as they combine high potency with low cytotoxicity against two human cell lines (HMEC‐1 and HepG2) along with easier synthetic accessibility. Replacement of the 4‐NH group with a sulfur bridge maintained antiplasmodial activity at a lower level, but produced an improvement in the resistance factor. These compounds warrant further investigation as potential drugs for use in the fight against malaria.     

Influence of low molecular weight ABS species on properties of PC/ABS systems

Differential scanning calorimetry (DSC), scanning electron microscopy (SEM) rheological, mechanical and impact tests were performed on alloys consisting of polycarbonate (PC) and diverse acrylonitrile‐butadiene‐styrene copolymers (ABS), from which different amounts of low molecular (M) weight (W) species had been previously extracted in a Soxhlet apparatus by methanol. The influence on properties of the alloy composition and of the low MW species amount was investigated. The glass transition temperature (Tg) was found to be a useful probe for monitoring the migration trends of low MW ABS species towards the PC domains for the different alloys. In a morphological analysis it was found that the higher the ABS extraction extent the less the penetration of the etching agent into the surfaces of smoothed specimens. The blend rheological behavior showed that the capability of improving the PC processability, characteristic of commercial ABS's, was strongly lowered by the ABS extracted ones. The alloy modulus was higher when the ABS extraction extent was larger. The yield stress of alloys showed higher values than that of the PC one, particularly at low ABS content. The alloy composition, for which the impact resilience was at its maximum value, strongly depended on the extraction extent. All the above findings seem to suggest an increased adhesion between PC and ABS domains with enhanced extraction amounts of low MW species from the ABS component.     

Use of microwave dielectric loss for characterisation of natural rubber/carbon black composites

Summary Microwave dielectric loss spectroscopy (MDS) has shown remarkable potential as a tool for the observation of changes in elastomer network structure within the interphase region of natural rubber/ carbon black composites. During crosslinking (non elemental sulphur system) the dielectric loss progressively increased. However, during ageing at high temperature the dielectric loss decreased. Parallel studies on the unfilled matrix yielded no such variation in dielectric loss. It was therefore concluded that the changes in microwave responses were related to the development of the interphase during curing and its subsequent destruction during ageing. The microwave response was related to the composite mechanical properties as a function of ageing time. The effect of stabiliser was also investigated. Received: 13 September 1999/Revised version: 7 February 2000/Accepted: 10 February 2000     

Sandwiched-Beam Procedure for Precracking Brittle Materials

A technique for precracking brittle materials is presented. This procedure, which is called the sandwiched-beam (SB) technique, allows the production of sharp through-thickness cracks with predetermined length in specimens with a rectangular section. A bar, in which an initial notch is produced by using a conventional saw, is inserted between two supporting beams and the sandwich assembly is loaded in three-point bending. Conditions can be defined that allow the stable propagation of a sharp flaw from the notch as the applied load is increased. Then, the cracked bar can be used to determine the fracture toughness. The SB technique is applied to different brittle materials, including soda-lime-silica glass, alumina, Si₃N₄, a SiC _w -Si₃N₄ composite, graphite, a Ti-Al intermetallic, and Carrara marble.     

Co-doped willemite ceramic pigments: Technological behaviour,crystal structure and optical properties

Cobalt-doped willemite is a promising blue ceramic pigment, but some important aspects concerning crystal structure, optical properties and technological behaviour are still undisclosed. In order to get new insight on these features, willemite pigments (Zn_2?xCo_xSiO₄, 0 < x < 0.3) were synthesized by the ceramic route and characterized from the structural (XRPD with Rietveld refinement), optical (DRS and colorimetry), microstructural (SEM, STEM, TEM, EDX, EELS) and technological (simulation of the ceramic process) viewpoints. The incorporation of cobalt in the willemite lattice, taking preferentially place in the Zn1 tetrahedral site, induces an increase of unit-cell parameters, metal–oxygen distances, and inter-tetrahedral tilting. It causes shifting and enhanced splitting of spin-allowed bands of Co²⁺ in tetrahedral coordination, implying slight changes of crystal field strength Dq and Racah B parameter, but increasing spin-orbit coupling parameter λ. Willemite pigments impart deep blue hue to ceramic glazes and glassy coatings with a colouring performance better than commercial Co-bearing colorants in the 800–1200 °C range. Detailed SEM-TEM investigation and microanalysis proved that no diffusion phenomena occur at the pigment–glassy coating interface and that willemite pigments are chemically inert during firing at 1050 °C.     

The specific-word frequency effect: Implications for the representation of homophones in speech production.

In a series of experiments, the authors investigated whether naming latencies for homophones (e.g., /nΛn/) are a function of specific-word frequency (i.e., the frequency of nun) or a function of cumulative homophone frequency (i.e., the sum of the frequencies of nun and none). Specific-word but not cumulative-homophone frequency affected picture-naming latencies. This result was obtained in 2 languages (English and Chinese). An analogous finding was obtained in a translation task, where bilingual speakers produced the English names of visually presented Spanish words. Control experiments ruled out that these results are an artifact of orthographic or articulatory factors, or of visual recognition. The results argue against the hypothesis that homophones share a common word-form representation, and support instead a model in which homophones have fully independent representations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Oxidation resistant ceramic foam from a silicone preceramic polymer/polyurethane blend

Silicon oxycarbide (SiOC) ceramic foams, produced by the pyrolysis of a foamed blend of a methylsilicone preceramic polymer and polyurethane (PU) in a 1/1 wt.% ratio, exhibit excellent physical and mechanical properties. The proposed process allows to easily modify the density and morphology of the foams, making them suitable for several engineering applications. However, it has been shown that, due to residual carbon present in the oxycarbide phase after pyrolysis, the foams are subjected to an oxidation process that reduces their strength after high temperature exposure to air (12 h 1200°C). A modified process, employing the same silicone resin preceramic polymer but a much lower PU content (silicone resin/PU=5.25/1 wt.% ratio), has been developed and is reported in this paper. Microstructural investigations showed that carbon rich regions deriving from the decomposition of the polyurethane template are still present in the SiOC foam, but have a much smaller dimension than those found in foams with a higher PU content. Thermal gravimetric studies performed in air or oxygen showed that the low-PU containing ceramic foams display an excellent oxidation resistance, because the carbon-rich areas are embedded inside the struts or cell walls and are thus protected by the dense silicon oxycarbide matrix surrounding them. SiOC foams obtained with the novel process are capable to maintain their mechanical strength after oxidation treatments at 800 and 1200°C (12 h), while SiOC foams obtained with a higher amount of PU show about a 30% strength decrease after oxidation at 1200°C (12 h).     

Overview of Sourdough Technology: from Production to Marketing

Sourdough is a type of dough fermented by yeast and lactic acid bacteria (LAB) used as sponge dough in bread making. Sourdough may have four classifications according to the fermentation type and the technological process used. On sourdough type I, the fermentation of yeasts and LAB present in the flour occurs spontaneously whereas in type II, fermentation occurs after the inoculation of a starter culture. Type III is simply type II sourdough dehydrated and type IV is a mixture of type I and type II sourdough, produced on laboratory scale. With LAB’s growth during fermentation, pH decreases with subsequent hydrolysis of starch and protein, favoring the growth of yeasts. The yeast in turn, releases amino acids during autolysis, contributing to the growth of LAB. Due to this synergistic growth of LAB and yeasts, the products obtained from sourdough show more concentration of flavor, more elastic dough, and a longer shelf life than bread fermented only by yeast. Although, the benefits of this technology, using sourdough, is present just in a few countries, where it is also possible to obtain the dehydrated sourdough starters, for domestic use, in local supermarkets. Due to its fermentative process complexity, this paper presents updated information about the fabrication process of sourdough, main factors affecting this process, benefits of sourdough use for bakery products, and the varieties of dehydrated sourdough commercially available throughout the world.     

Experimental and numerical study of hydrogen addition in a natural gas heavy duty engine for a bus vehicle

Hydrogen added to natural gas improves the process of combustion with the possibility to develop engines with higher performance and lower environmental impact. In this paper experimental and numerical analyses on a multi cylinder stoichiometric heavy duty engine, fuelled with natural gas–hydrogen blends, are reported. Some constrains on hydrogen content and maximum load achievable have limited the scope of investigation. A specific modelling of the reference engine was developed to extend the study at full load condition and at higher hydrogen content. The results showed a higher combustion speed when hydrogen content in the fuel is increased. However, the positive effect of shorter combustion duration on thermal efficiency is mitigated by higher wall heat loss, due to higher combustion temperatures. Therefore lower CO₂ emissions are due only to the substitution of natural gas with hydrogen, making crucial the way of hydrogen producing to have a benefit on well-to-wheel CO₂ emissions.