Will smartwatches last? factors contributing to intention to keep using smart wearable technology

This study aims to deepen our understanding of the underlying factors affecting the intention to continue using increasingly popular wearable technology. A new theoretical model is developed and validated to extend traditional technology acceptance theories by identifying several value drivers of the continuous intention and actual usage of wearable devices. Hypotheses were tested using partial least squares path modeling on data collected from 383 actual smartwatch users. The results provide wearable device manufacturers with practical guidance for optimizing competition strategies. They also offer policy-making insights for practitioners to promote better wearable devices on the market, especially during the early stages of adoption.     

Compact tunable tri-band bandpass filter using varactor diodes for wireless fidelity,wireless local area network,and worldwide interoperability for microwaves access applications

The purpose of this paper is to present a tri-band bandpass filter (BPF) with compact structure. This filter consists of 50 Ω transmission line, varactor diode, positive-intrinsic-negative (PIN) diode, symmetrical square-shaped half-loop resonator pair, and three pairs of rectangular half circle that a T-stub is placed in it. By using the add PIN and varactor diodes in the proposed structure, it is possible to connect and disconnect each band, and change the central frequency up to 400 MHz. In addition, there is a situation to disconnect and connect all three bands simultaneously and asynchronously (unconditionally). This filter contains a low ripple value in all three bands. In this regard, the maximum ripple value does not exceed 0.3 dB and rejection is greater than 25 dB in total stop-band. An experimental tri-band BPF has been developed for wireless fidelity, wireless local area network, and worldwide interoperability for microwaves access applications. The measured results are properly accommodated with simulated results.     

Facile Room‐Temperature Anion Exchange Reactions of Inorganic Perovskite Quantum Dots Enabled by a Modular Microfluidic Platform

In an effort to produce the materials of next‐generation photoelectronic devices, postsynthesis halide exchange reactions of perovskite quantum dots are explored to achieve enhanced bandgap tunability. However, comprehensive understanding of the multifaceted halide exchange reactions is inhibited by their vast relevant parameter space and complex reaction network. In this work, a facile room‐temperature strategy is presented for rapid halide exchange of inorganic perovskite quantum dots. A comprehensive understanding of the halide exchange reactions is provided by isolating reaction kinetics from precursor mixing rates utilizing a modular microfluidic platform, Quantum Dot Exchanger (QDExer). The effects of ligand composition and halide salt source on the rate and extent of the halide exchange reactions are illustrated. This fluidic platform offers a unique time‐ and material‐efficient approach for studies of solution phase‐processed colloidal nanocrystals beyond those studied here and may accelerate the discovery and optimization of next‐generation materials for energy technologies.     

Compact ultra‐wideband bandpass filter with variable notch characteristics based on transversal signal‐interaction concepts

A novel technique is presented to design highly compact microstrip ultra‐wideband (UWB) bandpass filters that exhibit high selectivity quasi‐elliptical response. The design is based on transversal signal‐interaction concepts that enable the inclusion of single or dual notch‐bands within the filter's passband to eliminate interference from other services that coexist within the UWB spectrum. The filter configuration comprises of two transmission paths which include folded T‐shaped stepped impedance resonators (SIRs) that are capacitively coupled with the input/output lines to enable signal transmission. It is shown that by combining the filters of different passband centre frequencies an UWB filter can be realised with either a single‐ or dual‐notch function. The theoretical performance of the filter is corroborated via measurements to confirm that the proposed filter exhibits UWB passband of 123% for a 3 dB fractional bandwidth, a flat group‐delay with maximum variation of less than 0.3 ns, passband insertion loss less than 0.94 dB, high selectivity, a sharp rejection notch‐band with attenuation of ?23 dB, and a good overall out‐of‐band performance. Furthermore, the filter occupies a significantly small area of 94 mm² compared with its classical counterparts. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:549–559, 2014.     

Establishment of a calibration curve for an isocentric cobalt unit using Monte Carlo simulation

Measurement of dose distribution in patients during radiotherapy is impossible. The Monte Carlo simulation is an alternative method for dose calculations. In routine radiotherapy, the source-to-surface distance(SSD)method is not practical for an isocentric unit because it requires numerous values of tissue–air ratios and inverse square law. Therefore, this method is time consuming. In this paper, the curves of relative depth doses were obtained for three different SSDs using the MCNP4C Monte Carlo simulation and approximated with a single curve called calibration curve. This curve was compared to the curve obtained by published data, differing in approximately 5% in the worst case. It was also observed that the obtained results were more accurate for distances between-5 and 10 cm from source-to-axis distance.     

Rheology of fluids measured by correlation force spectroscopy

We describe a method, correlation force spectrometry (CFS), which characterizes fluids through measurement of the correlations between the thermally stimulated vibrations of two closely spaced micrometer-scale cantilevers in fluid. We discuss a major application: measurement of the rheological properties of fluids at high frequency and high spatial resolution. Use of CFS as a rheometer is validated by comparison between experimental data and finite element modeling of the deterministic ring-down of cantilevers using the known viscosity of fluids. The data can also be accurately fitted using a harmonic oscillator model, which can be used for rapid rheometric measurements after calibration. The method is non-invasive, uses a very small amount of fluid, and has no actively moving parts. It can also be used to analyze the rheology of complex fluids. We use CFS to show that (non-Newtonian) aqueous polyethylene oxide solution can be modeled approximately by incorporating an elastic spring between the cantilevers.     

Experimental analysis of properties of materials for rapid prototyping

Rapid prototyping (RP) can substantially shorten the time and reduce the cost of developing a new product from the initial idea to production. Rapid prototyping can help in recognizing the basic defects whose subsequent correction may prove very expensive, especially if they have already been made when the product is ready for production. There are also many restrictions of RP procedures, primarily in the number of available materials and their properties, which may differ significantly from the properties of end product materials. In this work, based on the stipulated standards of the 3D printing machines (ZPrinter 310 Plus) and the hybrid Polyjet technique (Objet Eden 330), adequate test specimens were made. Furthermore, with adequate equipment, we carried out the analysis of the dimensions, roughness of surfaces, and mechanical properties of prototype test specimens. Then, based on the data obtained by testing of properties, we provided a critical commentary regarding the data stipulated by their producers.     

Machine-Learning-Based Genome-Wide Association Studies for Uncovering QTL Underlying Soybean Yield and Its Components

A genome-wide association study (GWAS) is currently one of the most recommended approaches for discovering marker-trait associations (MTAs) for complex traits in plant species. Insufficient statistical power is a limiting factor, especially in narrow genetic basis species, that conventional GWAS methods are suffering from. Using sophisticated mathematical methods such as machine learning (ML) algorithms may address this issue and advance the implication of this valuable genetic method in applied plant-breeding programs. In this study, we evaluated the potential use of two ML algorithms, support-vector machine (SVR) and random forest (RF), in a GWAS and compared them with two conventional methods of mixed linear models (MLM) and fixed and random model circulating probability unification (FarmCPU), for identifying MTAs for soybean-yield components. In this study, important soybean-yield component traits, including the number of reproductive nodes (RNP), non-reproductive nodes (NRNP), total nodes (NP), and total pods (PP) per plant along with yield and maturity, were assessed using a panel of 227 soybean genotypes evaluated at two locations over two years (four environments). Using the SVR-mediated GWAS method, we were able to discover MTAs colocalized with previously reported quantitative trait loci (QTL) with potential causal effects on the target traits, supported by the functional annotation of candidate gene analyses. This study demonstrated the potential benefit of using sophisticated mathematical approaches, such as SVR, in a GWAS to complement conventional GWAS methods for identifying MTAs that can improve the efficiency of genomic-based soybean-breeding programs.     

Real-time separation of aerosolized Staphylococcus epidermidis and polystyrene latex particles with similar size distributions

For rapid and effective detection of airborne microorganisms, it is preferable to remove dust particles during the air sampling process because they can reduce the detection accuracy of measurements. In this study, a methodology of real-time separation ofaerosolized Staphylococcus epidermidis (S. epidermidis) andpolystyrene latex (PSL) particles of similar size was investigated. These two species represent biological and non-biological particles, respectively. Due to their different relative permittivities, they grasp different numbers of air ions under corona discharge. After these charged particles enter a mobility analyzer with airflow, in which an electric field is applied perpendicular to the airflow, the S. epidermidis and PSL particles separate, due to the difference in their electric mobilities, and exit through two different outlets. Purities and recoveries for S. epidermidis and PSLat their respective outlets were determined with measurements of aerosol number concentrations and ATP bioluminescence intensities at the inlet and two outlets. The results were that purities for PSL and S. epidermidis were 70% and 80%, respectively. This methodology provides a rapid and simple way to increase the detection accuracy of bacterial agents in air.

Copyright © 2017 American Association for Aerosol Research