激光熔覆前合金粉末的火焰喷涂

火焰喷涂是激光熔覆前合金粉末的预置方法之一。本文在实验的基础上,探讨了工艺过程,并讨论了影响质量的因素。     

Nonuniformity of phase structure in immiscible polymer blends

This article is focused on the phase structure development in immiscible polymer blends during melt mixing. Nonuniformity of the phase structure, i.e., the coexistence of areas containing particles with markedly different size distribution, was detected in quenched and compression molded samples of a number of various blends prepared by long and intensive mixing in the chamber of a Plasticorder. The same effect was found also for polystyrene/polyamide blends prepared in a twin‐screw extruder. It was shown that neglecting nonuniformity of the phase structure can lead to considerable error in evaluation of the effect of system parameters on the blend morphology. The reasons for the effect were discussed and it was found that inhomogeneous flow field in mixers is a plausible explanation of the nonuniform phase structure. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Textilspanplatten

Ohne Zusammenfassung     

Influence of Cu<Superscript>2+</Superscript> ions on structural and magnetic properties of NiZn ferrites

The paper is devoted to the preparation of NiZn ferrite with small substitutions of copper by means of ceramic technology. The influence of small Cu substitution on the microstructural and magnetic properties of NiZn ferrites have been analysed by means of various experimental methods and interpreted from the point of view of preparation technology optimisation and possible applications of such materials. A strong correlation between the substituent content and resulting properties has been observed, thus allowing preparation of material with the properties tailored for any particular application.     

提高辽河原油重交通道路沥青的质量

辽河油田石化总厂为提高从辽河原油生产重交通道路沥青的质量，对所用的辽河原油中的低凝点环烷基原油经过分储、分输、分炼，对减压蒸馏塔进行改造，控制减压拔出率，对直馏沥青进行轻度氧化，使９０号重交通道路沥青中沥青质的含量大于１０％，蜡含量小于２％，质量达到了国际先进水平。     

Electrophysiological properties and cholinergic responses of rat ventral oral pontine reticular neurons in vitro

This study analyses the relationship between the use of rotating instruments, the production of a smear layer and the presence of alterations to enamel microstructures. The rotating instruments used were carbide (8-12 blade) and diamond tipped (30-15 m) cutters. Cavities were made in extracted teeth. Subsequently, half the sample was analysed using the rugosimeter before and after the application of ortophosphoric acid at 35% for 15 and the other half suing a Scansion Electronic microscope (SEM). The results obtained showed on the one hand that carbide cutters leave a smoother surfacer than diamond tipped cutters, and on the other that the smear layer is eliminated better by carbide cutters compared to diamond tipped cutters. Moreover, there are no major traumatic-type alterations at the level of the enamel affecting the microstructure after the use of carbide cutters.     

钻速模式动态辨识方法研究

目的：钻进过程是一个复杂的工艺过程，影响钻速的因素错综复杂。为钻井参数优化和实时控制，提出钻速动态模型。方法：对影响钻速的因素进行分析，用系统辨识方法建立钻速模式。结果：利用该方法建立了华北油田岔河集地区的钻速模型，取得满意结果。结论：此动态钻速模式能更准确、科学地描述钻进过程，并在钻井参数最优化、钻井过程的闭环控制等方面具有广阔的应用前景。     

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

Condensation polymerization of pyrogallol and benzaldehyde

Novolac-type polycondensation of benzaldehyde (B) and pyrogallol (P) has been carried out at 60°C, 75°C and 90°C and at B/P mole ratios of 1.5 and 3.0 using phosphoric acid as catalyst. The reaction follows a 2nd order rate law. By using GC consumption data of benzaldehyde and pyrogallol, kinetic parameters such as the overall rate constants, activation energies (E_a) and logA values are investigated. The activation energies for 1.5 and 3.0 B/P mole ratios are found as 62.3 kJ mol^?1 and 56.4 kJ mol^?1, respectively. The molecular weights of the resins determined by measuring intrinsic viscosities (25°C, THF) are in the range of 0.03 to 0.07 dL g^?1 at various temperatures and B/P mole ratios.     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).