微粒EMD电化学活性及应用

本文从等酸点pH值、pH—MnO_2电极电位,干电池放电容量等对微粒EMD同其他MnO_2进行比较,肯定了微粒EMD的电化学活性及应用价值。     

煤矸石的资源化利用

介绍了煤矸石的基本组成及对水体,土壤,大气等的危害。介绍了几种煤矸石利用的主要途径及新的利用途径,并进行了经济技术分析,提出煤矸石资源化利用的建议。     

蔚县矿区奥陶系下统灰岩岩溶发育规律的研究

对矿区基底O1灰岩的溶隙、溶孔、溶洞进行综合分析,得出矿区的岩溶形态和岩溶发育程度特征。对研究奥陶系灰岩岩溶含水层的发育分布特征、富水特征及其地下水运移规律具有重要意义。     

破坏煤分类及宏观和微观特征

本文在南桐矿区井下煤壁、手标本和煤岩光片观测的基础上，对煤的宏观和微观坏特征以及破坏类型划分进行了研究。采用煤层某一分层的平均破碎程度级别将煤体宏观破坏类型分为两类四型七种。参照构造岩的分类将煤体显微破坏类型分为６类，划分出８种显微结构，描述了各类破坏煤特征并指出了宏观和显微破坏类型之间的关系。     

Experimental and MD simulation study on the physical and mechanical properties of organically modified montmorillonite clay and compatibilized linear low density polyethylene nanocomposites

Understanding the interfacial interactions plays a key role in controlling mechanical and physical properties of polymer/clay nanocomposites (PCNs). In this work, the surface interactions between constituents of experimentally prepared PCNs which are the pristine linear low density polyethylene (PE) chains, PE compatibilizers, montmorillonite clay surface layer, and surfactants were studied quantitatively by employing molecular dynamics simulation technique. The interaction energy between the polymer and the clay was found to be inversely proportional with the volume of the surfactant which decreases the electrostatic interactions between the compatibilizer and the hydrophilic clay surface. However, the van der Waals (vdW) interactions between alkyl tails of surfactants and the PE chains increase with the tail length of the surfactants. The most attractive interaction was between the surfactant's head group and the clay surface. We showed that there existed fine balance between the electrostatic and vdW type forces on the stability and the enhanced properties of the PE–organoclay nanocomposites. Calculated interaction energies were then correlated to the experimentally measured mechanical properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45817.     

Effect of processing method on microstructure,electrical conductivity and electromagnetic wave interference (EMI) shielding performance of carbon nanofiber filled thermoplastic polyurethane composites

In this study, effect of processing method on microstructure formation and related electrical conductivity and electromagnetic interference shielding effectiveness of carbon nanofiber (CNF) filled thermoplastic polyurethane (TPU) composites, prepared via three different processing techniques; (i) melt compounding (MC) in a twin screw extruder, (ii) simple solution mixing (SM) on a magnetic stirrer, and (iii) solution mixing with sonication (SM-U) were investigated. It was found that the electrical conductivity values of samples decreased in the order of SM > SM-U > MC for a particular amount of CNF. The electromagnetic test results showed that the samples prepared with SM and SM-U methods yielded higher total shielding effectiveness (SE_T) values than those prepared with MC. SE_T values of samples including of 20 phr of CNF prepared with MC, SM-U and SM methods were varied in the range of 10–30 dB, 20–60 dB and 20–80 dB, respectively within a frequency range of 1–12 GHz.     

Polyhedral oligomeric silsesquioxane-based hybrid networks obtained via thiol-epoxy click chemistry

A series of hybrid networks based on polyhedral oligomeric silsesquioxane (POSS) were prepared by thiol-epoxy click reaction using commercially available octakis-glycidyl-POSS (G-POSS), trimethylolpropane triglycidyl ether, and trimethylolpropane tris(3-mercaptopropionate) as monomers. The click reaction was simply catalyzed by lithium hydroxide which proceeded readily at ambient conditions in very good yields. The incorporation of G-POSS into the network was clearly determined by transmission electron microscopy, FTIR, and ¹H-NMR spectroscopy techniques performed with a model study using 1-butane thiol and G-POSS molecules. The homogeneous distribution of G-POSS up to 5 wt% in the hybrid network was apparently confirmed by morphological investigations. By increasing G-POSS content higher than 5 wt%, the heterogeneous dispersion of G-POSS was determined from the tensile strength measurements. The significant decrease in tensile strength was possible due to the agglomeration of G-POSS. On the other hand, thermal properties of hybrid networks were compared together by thermogravimetric analyses, where all samples exhibited one-step degradation in the range of 220–500 °C. The thermal decomposition of hybrid network led to complete degradation of the organic part and favored the formation of stable carbonaceous and inorganic residues as char. Thus, the char yields of hybrid networks were increased to 6.2, 7.8, 10.1, 12.7, and 15.1% by G-POSS loadings from 0 to 15 wt%. This improvement was also a proof of the incorporation of G-POSS into the hybrid networks that resulted in high heat-resistant POSS-based hybrid networks compared to a sample without G-POSS.     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

An Improvement Method of Matrix Converter Drives Under Input Voltage Disturbances

While the matrix converter has many advantages that include bidirectional power flow, a size reduction, a long lifetime, and sinusoidal input currents, it is vulnerable to the input voltage disturbances, because it directly exchanges the input voltage to the output voltage. The instantaneous effective power control (IEPC) method has been proposed to compensate the input voltage disturbances, in which the instantaneous effective power is kept constant by controlling input current. However, to date, no method has been proposed to maintain the stability of the system with the IEPC. The purpose of this paper is to propose a method to control the stability of the system with IEPC. First, this paper explains the IEPC theoretically. Next, a model of the system with the IEPC is developed, and stability analyses are conducted. Then, based on the results of the analyses, a stability control method for the system with the IEPC is proposed. Furthermore, the validities of the proposed method are demonstrated by simulation and experiments. Finally, a restart performance of the system after momentary power interruption is discussed. Because the IEPC does not need phase-locked-loop to detect the phase angle of the input voltage, fast restart is expected     

黄药合成工艺的生产实践

本文介绍了永平铜矿强力公司黄药合成的工艺概况 ,并论述了在生产实践中对提高产品质量所采取的主要措施