STUDY ON GIS BASED PREDICTION SYSTEM FOR RADIO WAVE PROPAGATION IN UBAN REGION

In this letter, an integrated application of the prediction for radio wave propagation with the Geographic Information System (GIS) is presented and a real prediction system based on GIS is implemented.     

Fuel management of the HTR-10 including the equilibrium state and the running-in phase

The mode of fuel management of the HTR-10 was studied, including the simulation of the fuel shuffling process and the measurement of the burnup of a fuel element. The prior consideration was the design of the equilibrium state. Based on this the fuel loading of the initial core and the fuel shuffling mode from the initial core through the running-in phase into the equilibrium state were studied. The code system VSOP was used for the physical layout of the HTR-10 at the equilibrium state and in the running-in phase. For the equilibrium state, in order to lessen the difference between the peak and the average burnup, 5-fuel-passage-through-the-core was chosen for the fuel management. The average burnup of the spent fuel for the equilibrium core is 80 000 MWd t⁻¹, and the peak value of it is less than 100 000 MWd t⁻¹ when the burnup of the recycled fuel element is under 72 000 MWd t⁻¹. The mixture of fuel element and graphite element was used for the initial core loading, the volume fractions of the fuel and the graphite elements were 0.57 and 0.43, respectively. During the running-in phase, the volume fraction of graphite will decrease with the fresh fuel elements being loaded from the top of the core and the graphite elements discharged from the bottom of the core. The fuel shuffling mode is similar to that of the equilibrium state. The burnup limit of recycled fuel element is also 72 000 MWd t⁻¹ and the peak burnup is less than 100 000 MWd t⁻¹. Finally the core will be full of fuel elements with a certain profile of burnup and reaches the equilibrium state. According to the characteristics of the pebble-bed high temperature gas-cooled reactor, a calibrating method of concentration of ¹³⁷Cs was proposed for the measurement of fuel burnup.     

高效率窄线宽光纤激光器

本文报道了一种环形腔掺饵光纤激光器，得到了泵浦效率高达22.6%，输出线宽小于0.1nm的激光输出。     

走特色城镇建设发展之路--大理白族自治州开展白族民居建筑风格整治

一、基本情况和主要做法 “越是民族性的,就越是世界性的”。特色城镇建设已成为当今城镇规划建设的主潮流。 大理的洱海流域是以白族为主要世居民族的多民族聚居区,经过白族先民上千年创造并汲取各族优秀建筑文化智慧结晶白族民以其独特的院落布局、庭院绿化、照壁门楼、白墙青瓦、坡顶屋面、流檐飞阁、淡墨彩画、精美木雕和砖雕泥塑等丰富的建筑文     

Adaptive 2D finite element simulation of metal forming processes

The development and integration of available current methods and the development of new methods for an adaptive finite element analysis of metal forming processes are presented. The analysis includes large-strain, elastic–plastic, and thermal effects. Many numerical methods such as mesh generation, simulation of the contact between the workpiece and tool and die, and optimization of the finite element mesh are integrated and incorporated. In addition, an algorithm is developed which can detect certain severely distorted elements where the area of integration is approaching zero. The advantage of correcting these regions of locally distorted elements is demonstrated. These numerical methods are implemented in a finite element program developed for simulating metal forming processes, with the emphasis on automating the analysis. Examples include an axisymmetric stress simulation of a coldheading process, a plane strain simulation of an extrusion process and a plane strain simulation of orthogonal metal cutting, all with noticeable thermal effects. The orthogonal cutting forces and feed forces calculated are compared with two sets of experimental data, with good agreement.     

高压热处理对氧沉淀低温形核的影响

研究了外加高压(1GPa)下对450℃热处理硅片中氧沉淀行为的影响.透射电镜观察表明相对于大气压下热处理的样品,高压处理的样品会产生密度更高、尺寸更小的氧沉淀,表明高压有利于小直径氧沉淀的生成.电学性能测试表明,高压下处理的样品其热施主生成浓度和生成速率远远高于常压下处理的样品,这表明热施主与低温热处理过程中生成的高浓度氧沉淀核心有密切的关系.     

中国台湾电信市场现状

台湾电信市场的开放大致分四个阶段,从1995年起,陆续开放了移动通信、卫星通信及固定通信等多种业务。固网市场,2001年新世纪资通、台湾固网和力霸宽频电信的加入打破了中华电信的独家垄断,开始形成四强竞争的新局面。移动领域,1997年底6家运营商8张民营执照的发放开始了该领域史无前例的竞争。在2001年1月,台湾大哥大、远致电信、亚太行动宽频、联邦电信和中华电信获得了3G执照,累计竞标金额达488.99亿元(新台币)。     

工艺条件对薄片陶瓷材料凝胶流延成型的影响

利用有机单体的聚合原理，成功进行了陶瓷薄片材料的凝胶流延成型。讨论了工艺条件对成型的影响。使用惰性气氛保护克服了单体聚合反应中的氧气阻聚问题，浆料在一定温度和气氛条件下能够顺利完成聚合反应。所成型的坯体具有良好的强度和柔韧性，在1550℃经2h烧结，烧结样品显微结构均匀，没有发现晶粒异常长大现象，烧结体致密度达到97．7％。