Crystallization of poly(3‐hydroxybutyrate) by exfoliated graphite nanoplatelets

Poly(3‐hydroxybutyrate) (PHB) has been shown to be efficiently nucleated by exfoliated graphite nanoplatelets (xGnP). The nucleating effect of xGnP was investigated using differential scanning calorimetry, optical microscopy and atomic force microscopy. Nonisothermal crystallization of PHB from the melt required lower activation energies for PHB containing 1 wt % and 3 wt % xGnP (?214 and ?102 kJ/mol respectively) than for pure PHB (?60 kJ/mol). A kinetic study of the PHB/xGnP crystallization employing a modified form of the Avrami equation revealed that the presence of xGnP increased the PHB crystallization temperature, as well as the crystallization rates, and generated smaller and more numerous spherulites. Optical microscopy and atomic force microscopy confirmed the incorporation of xGnP into the lamellar structure of the PHB spherulites and provided insight into the influence of xGnP on spherulite size and lamellae thickness. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Nanomechanical and surface frictional characteristics of a copolymer based on benzoyl-1,4-phenylene and 1,3-phenylene

Surface mechanical and tribological properties of a copolymer based on benzoyl-1,4-phenylene and 1,3-phenylene were evaluated using nanoprobe investigation techniques and compared to the properties obtained at the macroscale. These copolymers are commonly referred to as self-reinforced polymers (SRPs) because of their intrinsic high strength and modulus without addition of a reinforcing agent. Specimens were prepared by spin casting, solvent casting, and compression molding. Surface mechanical properties and film thickness were measured by nanoindentation and scratching techniques. Friction properties were found using lateral force microscopy (LFM), and surface topography was imaged by tapping mode atomic force microscopy (AFM). Macroscale friction testing revealed a kinetic coefficient of friction of 0.08 for SRP, approaching that of Teflon. Similarly low relative friction coefficients were obtained in nanoprobe measurements. Nanoindentation of SRP, polycarbonate (PC), and polyetherimide (PEI) demonstrated superior surface hardness and modulus of SRP copolymer thin films.     

Nonisothermal crystallization behavior of glass‐bead‐filled polypropylene

The effects of the glass‐bead content and size on the nonisothermal crystallization behavior of polypropylene (PP)/glass‐bead blends were studied with differential scanning calorimetry. The degree of crystallinity decreased with the addition of glass bead, and the crystallization temperature of the blends was marginally higher than that of pure PP at various cooling rates. Furthermore, the half‐time for crystallization decreased with an increase in the glass‐bead content or particle size, implying the nucleating role of the glass beads. The nonisothermal crystallization data were analyzed with the methods of Avrami, Ozawa, and Mo. The validity of various kinetic models for the nonisothermal crystallization process of PP/glass‐bead blends was examined. The approach developed by Mo successfully described the nonisothermal crystallization behavior of PP and PP/glass‐bead blends. Finally, the activation energy for the nonisothermal crystallization of pure PP and PP/glass‐bead blends based on the Kissinger method was evaluated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2026–2033, 2006     

Structure and properties of compatibilized blends of polyamide-6 and ABS

Mechanical and Morphological properties of polyamide-6/ABS blend systems, compatibilized by styrene-maleic anhydride (SMA) copolymer, have been studied. The strength, modulus, and impact properties improved upon the addition of SMA. Morphological studies, using small angle light scattering, polarizing microscopy, and scanning electron microscopy, showed that SMA acts as a compatibilizer for the above system. © 1993 John Wiley & Sons, Inc.     

Polybutylene terephthalate/high-density polyethylene alloys. I. Morphological studies

Polybutylene terephthalate (PBT) is a commercially successful thermoplastic polyester but has certain drawbacks such as low impact strength and low melt strength. An attempt has been made to modify the properties of PBT by blending it with polyolefin such as highdensity polyethylene (HDPE). Since PBT and HDPE are incompatible, an ionomer has been used as a compatibilizer to form an alloy. Alloys of PBT and HDPE with varying amounts (2-8%) of ionomer were prepared by melt blending. The ultimate mechanical properties improved significantly on the addition of the ionomer due to an increase in interfacial adhesion between PBT and HDPE. DSC studies show that the presence of ionomer facilitated the crystallization of PBT in the alloy. DMTA studies show that more of PBT (amorphous) is going in to the HDPE-rich phase in the presence of ionomer. The morphology of the alloys was studied using scanning electron microscopy (SEM), polarizing microscopy (PM), and small-angle light scattering (SALS). They showed improved dispersion of HDPE domains in PBT matrix with increasing ionomer content and change in the type of superstructure on adding the ionomer. It has been shown that an alloy of PBT and HDPE with improved mechanical properties and homogeneous morphology can be made with use of ionomer as a compatibilizer. Such alloys are cost effective and can find use in several engineering applications.     

Graft copolymerization of acrylonitrile onto acetylated jute fibers

Graft copolymerization of acrylonitrile (AN) onto acetylated chemically modified jute was carried out in the temperature range 40–60°C using V⁵⁺-cyclohexanone redox initiator system. The effects of temperature, time, concentrations of metal ion (V⁵⁺), monomer (AN), cyclohexanone, some inorganic salts, and organic solvents on percent grafting have been studied. IR spectra of acetylated chemically modified jute and grafted jute have been taken, and their characteristic bands have been identified. Grafting has improved the thermal stability and also the lightfastness rating of jute fibers dyed with basic dyes.     

Increasing productivity and protein content using early-maturing rices and efficient nitrogen management

Germplasm with shorter duration than that of the currently grown varieties is being generated to maximize productivity of irrigated rice. However, short-duration varieties often produce yields lower than the medium- and long-duration varieties. Experiments were conducted during the 1980–82 dry and wet seasons to increase productivity through the use of very early-maturing rices and the improved management of nitrogen (N) fertilizers.Results over three years showed that IR58 and IR9729-67-3 (growth duration 100 ± 5 days) yield as well as or higher than IR36 although earlier maturing. They generally had a higher productivity (kg ha^–1 day^–1) than IR36 (110 ± 5 days).Three years' data suggest that the improved timing of broadcast applications of urea in split doses increased grain yield comparable with the basal incorporation of slow-release sulfur-coated urea (SCU) or deep point-placement of urea supergranules (USG).Results on elite breeding lines showed that the early-maturing IR9729-67-3 produced higher protein yield ha^–1 than longer duration varieties such as IR8 and IR42 in the dry season. Furthermore, contrary to earlier results, single basal incorporation of slow-release SCU increased the protein yield of rice by 53 kg ha^–1 and deep point-placement of USG by 43 kg ha^–1 over split application of prilled urea.     

Viscometric studies of starch-g-polyacrylamide composites

Composites of starch-g-polyacrylamide, starch, and polyacrylamide have been prepared by gamma radiation-initiated polymerization of acrylamide in the presence of starch in aqueous medium. The polymerization was studied as a function of the (i) amount of water (ii) monomer concentration, and (iii) total dose. The optimum conditions for maximum conversion of the monomer to homopolymer and graft copolymer have been evaluated. Percentage of grafting of polyacrylamide could not be determined precisely as both the homopolymer and the graft are soluble in common solvents and all attempts to separate the graft from the homopolymer were unsuccessful. However, the formation of the starch-g-polyacrylamide copolymer was confirmed by the turbidimetric studies using acetone as a nonsolvent. The products of polymerization of acrylamide in the presence of starch consisted of unreacted starch, starch-g-polyacrylamide, and polyacrylamide and is referred to as the composite. Acrylamide was also polymerized in the absence of starch using γ-rays as means of initiation and the optimum conditions for maximum conversion of acrylamide to polyacrylamide have been evaluated. Viscosity behavior of the composite and polyacrylamide was studied in aqueous medium at 30±0.04°C. The reduced specific viscosity of the aqueous solution of acrylamide and the composite as well was found to increase with increasing dilution, the effect being more pronounced in the composite. This tends to indicate that both the homopolymer and the composite behave as polyelectrolytes. An attempt has been made to explain the polyelectrolytic behavior of the homopolymer and the composite. © 1993 John Wiley & Sons, Inc.     

Ractions of SiC with H2/H2O/Ar Mixtures at 1300°C

The reactions of a sintered α-SiC with 5% H₂/H₂O/Ar at 1300°C were studied. Thermomchemical modeling indicates that three reaction regions are expected, depending on the initial water vapor or equivalently oxygen content of the gas stream. A high oxygen content ( P (O₂) > 10⁻²² atm) leads to a SiO₂ formation. This generally forms as a protective film and limits consumption of the SiC (passive oxidation). An intermediate oxygen content (10⁻²² atm > P (O₂) > 10⁻²⁶ atm) leads to SiO and CO formation. These gaseous products can lead to rapid consumption of the SiC (active oxidation). Thermogravimetric studies in this intermediate region gave reaction rates which appear to be controlled by H₂O gas-phase transport to the sample and reacted microstructures showed extensive grain-boundary attack in this region. Finally, a very low oxygen content ( P (O₂) < 10⁻²⁶ atm) is thermochemically predicted to lead to selective removal of carbon and formation of free silicon. Experimentally low weight losses and iron silicides are observed in this region. The iron silicides are attributed to reaction of free silicon and iron impurities in the system.     

Studies on polyblends of poly(vinyl chloride) and acrylonitrile-butadiene-styrene terpolymer

Blends of poly (vinyl chloride) (PVC) and acrylonitrile-butadiene styrene (ABS) terpolymer were prepared in different ratios by a melt blending technique. ABS containing three different levels of rubber content were used. A quantitative assessment of ABS in PVC/ABS blends has been shown by infrared studies. ABS content has been shown as the presence of the characteristic acrylonitrile peak. Differential scanning calorimetry (DSC) studies have been carried out to study the glass transition (T_g) behavior of the blends. Two T_g values corresponding to PVC and styrene-acrylonitrile (SAN) copolymer have been observed. Thermogravimetric analysis (TGA) reveals a significant improvement in thermal stability of these blends as compared to PVC. Mechanical properties show a significant increase in the impact strength which is related to rubber content of the ABS used. Morphological studies have been carried out by scanning electron microscopy which support the observation that an increase in rubber content results in greater ductility.