Immiscible polymer blend electrorheological fluids: Composition dependence

We investigated the composition dependence of the electrorheological properties of immiscible polymer blends which consist of liquid crystalline polymers (LCPs) and polydimethylsiloxane (DMS). We used two different kinds of LCPs, designated as A and B polymers. We observed that for a fixed ratio of an LCP and DMS (LCP:DMS = 2:1) the electrorheological properties change from type I to type II as the fraction of the A polymer is reduced. Microscopic observations indicate that the change in the electrorheological properties is associated with the structural change; in type I, LCP droplets are dispersed in DMS, while in type II, DMS droplets are dispersed and, furthermore, that the structural change is associated with the miscibility between DMS and the LCPs; the A polymer is partially miscible with DMS, while the B polymer is hardly miscible with DMS. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3673–3680, 2002     

(Z,Z)-5,27-Tritriacontadiene: Major sex pheromone ofDrosophila pallidosa (Diptera; Drosophilidae)

A crude cuticular extract from both sexes of 3660 fruit flies (Drosophila pallidosa) was subjected to SiO₂ and AgNO₃/SiO₂ column chromatography, accompanied by bioassay for the sex pheromone activity. After three chromatographic steps, the active fraction was obtained. The main component of the active fraction was determined to be (Z,Z)-5,27-tritriacontadiene [(Z,Z)-5,27-C_33:2, on the basis of gas-liquid chromatographic analysis, chemical derivatization and gas chromatography-mass spectrometry. Synthetic (Z,Z)-5,27-C_33:2 at 5 female equivalents (FE) elicited a clear courtship response with a high courtship index amongD. pallidosa males. Therefore it was concluded that (Z,Z)-5,27-C_33:2 was a major sex pheromone component in this species.     

Strengthening of Alumina by Reactions with Silicon Film on the Surface and Effects of Ion Irradiation

Deposition of Si film on sintered alumina, followed by annealing at 1673 K in air, increased the flexural strength by ∼28%. Mullite formation on the surface was confirmed by X–ray diffraction analysis. Ion irradiation of the Si/alumina interface, followed by annealing, produced anorthite but not mullite, and the flexural strength also increased by ∼35%. Thermal expansion mismatch between surface compounds and the alumina body may be responsible for the strengthening.     

Fiber Formation in Medium and Ultra‐High‐Molecular‐Weight Polyhydroxybutyrate Blends under Shear Flow

Summary: Polyhydroxybutyrate (PHB) is an ideal bioplastic, however, this polymer undergoes a severe embrittlement process because of its spherulitic structure, rendering the material brittle. Using a series of in‐situ rheo techniques, we have previously observed only the rapid initial stage of shish formation, we term a partial shish, which existed at high shears in medium‐molecular‐weight PHB, = 360 000. The shish kebab morphology is anticipated to remove or severely lessen this embrittlement process whilst providing new properties and applications. For medium and ultra high‐molecular‐weight (MMWT, = 360 000/UHMWT, = 5 × 10⁶) PHB 99/1 and 99.5/0.5 blends only a partial shish is identified. However, the initial shish formation stage and subsequent stages were observed at 98/2 and 97/3 blend ratios resulting in a complete shish, we term the full shish, and fiber formation was evident. We believe this fiber morphology achieved by high molecular weights is crucial to sustaining the shish kebab structure for an excessive period.

Left: In‐situ rheo‐light scattering micrograph; 97/3 MMWT/UHMWT PHB at 100 s^?1 for 1 s shear shish held at 75 s. Right: In situ rheo‐optical micrograph; PHB fiber morphology observed at 50 s^?1 for 2 s shear 98/2 MMWT/UHMWT PHB after 1 min.     

EFFECT OF DISTRIBUTOR ON BUBBLE SIZE AND BUBBLE RISE VELOCITY IN THE SLUGGING REGIME OF A SEMI-CYLINDRICAL GAS-SOLID FLUIDIZED BED†

A semi-cylindrical fluidized bed of 15 cm internal diameter, equipped with a transparent flat glass plate for the front wall, was employed to visually observe bubbles in the bubbling to slugging transition regime and in the slugging regime. Five kinds of perforated distributors were used to investigate the effect of distributor type on the bubble size and the bubble rise velocity. The average bubble size was not affected by distributor type in these flow regimes, and could be predicted by Darton et al's correlation (1974)of hole number 22. In other words, this comes from the inapplicability of the correlation to the slugging regime. The bubble rise velocity agreed well with Allahwala et al's correlation (1979) and was not affected by the type of distributor.     

Behavioral Response of Males to Major Sex Pheromone Component, (Z,Z)-5,25-Hentriacontadiene, of Drosophila ananassae Females

To identify sex pheromone components in Drosophila ananassae, the cuticular hydrocarbons were analyzed and bioassayed. After silicic acid and two silver nitrate–silicic acid chromatographic steps, active fractions containing (Z,Z)-5,25- and (Z,Z)-4,26-hentriacontadiene as the most abundant components were obtained. Both hydrocarbons could elicit male courtship behavior. The former was the more predominant compound and elicited a higher courtship index value than the latter. Cuticular hydrocarbon differences between D. ananassae and its close relative, D. pallidosa, and their roles in species recognition are discussed.     

Electrolytic decomposition of amaranth dyestuff using diamond electrodes

The electrolytic decomposition of an amaranth dyestuff solution using several combinations of electrodes with diamond and platinum is reported. It is observed that a portion of the amaranth is decomposed on the cathode surface while the other portion is decomposed to lower molecular weight components on the anode surface. The decolourizing rate is higher at diamond electrodes used as the anode and the cathode than with other combinations. This electrode combination also shows a rapid decrease in total organic carbon concentration. Acetic acid and oxalic acid are detected as the intermediate substances, and CO₂ gas is generated as a final product corresponding to the decrease in the oxalic acid concentration.     

Port capital formation and economic development in Japan: A vector autoregression approach

Applying the lag-augmented vector autoregression approach developed by Toda and Yamamoto (1995), we analyse the causal relationships among GDP, private capital, transport user cost, and port capital in Japan, and investigates the dynamic and accumulated effects of port capital formation on other variables from 1966 to 1997. Results from our analysis indicate that the causal relationships between port capital and other variables are significant. Port capital development leads to accrual of considerable magnitudes of both flow and stock effects. We conclude that structural economic effects of forming port capital are substantial for Japan.Received: 10 September 2002, Accepted: 14 August 2003, JEL Classification: C32, E22, F10, O47, R42We express our gratitude to the Ports and Harbors Bureau of Japans Ministry of Land, Infrastructure and Transport for providing us with valuable data. We also thank the Pacific editor and anonymous referees for useful comments.     

Effects of Rice Straw on the Color and Microstructure of Bizen, a Traditional Japanese Stoneware, as a Function of Oxygen Partial Pressure

The effects of oxygen partial pressure during thermal treatment on the color and microstructure of Bizen, a traditional Japanese stoneware, were studied through model experiments using clay pellets covered lightly with rice straw as a coloring assistant. When heated in flowing nitrogen, the model pellet turned blackish owing to the formation of α-Fe particles coated with graphite. However, schreibersite (Fe₃P), which is also blackish, was formed specifically on the pellet surface in direct contact with the straw. The rice straw seems to have generated a strongly reducing atmosphere, strong enough for the metallization to α-Fe, and also to have provided phosphorus through contact. When oxygen content in the surrounding gas atmosphere was raised to N₂/O₂=99/1, the pellet surface turned yellowish brown because the main coloring material was Fe³⁺-containing mullite. At oxygen contents of N₂/O₂=98/2 or more, the formation of hematite (α-Fe₂O₃) pushed the color to deep red.