Optical properties of end-sealed hollow fibers

We propose sealing techniques for medical hollow fibers to protect the inner surface of fibers from debris or water that scatters from targets. First, hollow fibers are sealed with a film of polymer that is easily formed by use of a dipping technique. The transmission loss of 20-microm-thick sealing film was 0.2 dB for Er:YAG laser light, and the maximum energy that is available for the film was 180 mJ. Second, a sealed glass cap was applied to the output end of hollow fiber. The silica-glass cap with a wall thickness of 400 microm shows a transmission loss of 0.5 dB and was not damaged by radiation of 400-mJ energy pulses.     

Complex impedance and admittance of a silver-conducting glass

From the analysis of complex impedance and admittance data of (Agl)₇₅(Ag₄P₂O₇)₂₅ glass, an Ag⁺-ion conductor, it was revealed that the sample can be approximated by a seriesRC ₁ circuit at high temperature, with the capacitorC ₁ arising from the charge-carrier depleted region near the anode which develops as conduction proceeds, and by a parallelRC ₂ circuit at low temperature, with the capacitorC ₂ arising from the saturated value for ionic polarization of, say, the silver-iodine pairs as well as from the relaxation effect of the Ag⁺ ions for conduction. TheC ₁ andC ₂ values were found to be almost temperature-independent at peak frequencies of the distorted semicircles in respective complex planes, with the ratioC ₁/C ₂ as large as 10⁴.     

Sialon formation by Si+ and N2 + ion implantation into sapphire

Single-crystal alumina was implanted firstly with 400 keV Si⁺ and subsequently with N₂ ⁺ ions and then annealed at 1673 K in an No atmosphre. The implanted layers were characterized by means of X-ray diffraction, Rutherford backscattering-channelling of 2 MeV He⁺ ions, and the resonance nuclear reaction¹⁵N(p,)¹²C. The annealing of sapphire implanted at ambient temperature resulted in the formation of-sialon, a solid solution of-silicon nitride and alumina in the subsurface layer, while implantation at 100 K resulted in the formation of aluminium oxynitride in the surface layer. In the latter case, the implanted silicon atoms were believed not to react vxi1h the implanted nitrogen atoms but with the substrate oxygen atoms. These crystalline precipitates were found to have epitaxial relations with the sapphire substrate.     

A new parameter for describing the structure bifurcation in two-phase alloys containing coherent particles

The so-called bifurcation diagrams for precipitate particles in nickel-based alloys were obtained by calculating the energy state for a pair of particles on the basis of the bifurcation theory. Based on the bifurcation diagrams, we have proposed a new parameter for describing the two-phase structure containing coherent particles. The parameter is defined as the mean particle radius at the intersection of the energy ridge and the line ofR=–0.5 orR=0.5 in the bifurcation diagram (R(r –r )/(r +r ), wherer andr are the radii of and ), and is symbolized by¯r ^* _±0.5. Because the energy state of the paired and is maximum at¯r ^* _±0.5 whenR=±0.5,¯r ^* _±0.5 is just like the watershed and hence we have termed it structureshed. This parameter successfully describes the effects of elastic energy as well as surface energy on the microstructural changes during coarsening of precipitate particles.     

Discrete finger and palmar feature extraction for personal authentication

A practical method for a noncontacting and real-time feature extraction for personal authentication is proposed. The finger geometry and feature extraction of the palmar flexion creases are integrated into a small number of discrete points based on the anatomical observation. For a video image of either palm, a palm placed freely facing toward a video camera is acquired. The fingers are brought together, and the palm is straightened out to eliminate any constraints. The discrete feature points for the fingers involve intersection points of the three finger (digital) flexion creases on the four finger skeletal lines. The feature points for the palm involve intersection points of the major palmar flexion creases and/or prominent creases of the palm on the extended finger skeletal lines. The orientations of the creases at the intersection points are also extracted features to be matched. The matching results are perfect for about 500 palm samples from 50 subjects so far. This discrete point processing, requiring no time-consumptive palmprint image analysis and requiring less than one second processing time, will contribute to a noncontacting, real-time and reliable feature extraction, easily combinable with other traits, for the personal authentication.     

Fabrication of a polymer-coated silver hollow optical fiber with high performance

The techniques for fabricating a hollow optical fiber with an inner silver layer and a cyclic olefin polymer (COP) layer have been improved to reduce the surface roughness of these two layers. The loss spectrum was thereby drastically reduced over a wide wavelength range, from visible to near infrared. Optimization of the COP layer thickness resulted in low loss simultaneously at several key laser wavelengths. Infrared hollow fiber with low loss was developed for Er:YAG and Nd:YAG lasers. It can also deliver green and red pilot beams with low loss. Use of this fiber in therapeutic and pilot lasers should prove useful for research and development in laser medicine.     

The role of dispersed particles in strengthening and fracture mechanisms in a Mo-ZrC alloy processed by mechanical alloying

The tensile properties of a ZrC particle-dispersed Mo, which was processed by spark plasma sintering with mechanically alloyed powder, were investigated at room temperature and at elevated temperatures of 1170 to 1970 K. The Mo-ZrC alloy showed much higher strength at room temperature than a fully recrystallized pure Mo. The high strength of Mo-ZrC is mainly attributed to a very small grain size (about 3 μm). The main role of the ZrC particle is not to increase strength due to the particle-dislocation interaction, but to limit grain growth during sintering and to attain the very small grain size. The elongation at room temperature of Mo-ZrC was much lower than that of pure Mo. This is probably related to the higher interstitial contents. However, Mo-ZrC showed a large elongation of 180 pct at 1970 K and 6.7×10⁻⁴ s⁻¹. It was suggested that the ZrC particles stabilized the fine-grained microstructure yet provided no cavitation sites at 1970 K; as a result, the large elongation was attained.     

Vascular endothelial growth factor enhances vascularization in microporous small caliber polyurethane grafts

Neoarterial regeneration in an implanted small caliber vascular prosthesis is complexly controlled by many structural and biologic factors, such as cytokines. The authors designed an artificial graft, which was prepared as follows. Segmented polyurethane tubular film (inner diameter, 1.5 mm; wall thickness, 100 microns; length, 20 mm), in which micropores (pore size, 100 microns) were fabricated by an excimer laser ablation technique, were coated with a mixed solution of photoreactive gelatin and heparin with or without cytokines (vascular endothelial growth factor [VEGF]: 5 or 50 micrograms/ml, basic fibroblast growth factor [bFGF]: 1 microgram/ml). These coated grafts were irradiated by ultraviolet light, and were implanted in aortas of rats for 4 weeks; the VEGF (5 micrograms/ml) group, n = 6; the bFGF group, n = 6; the VEGF (5 micrograms/ml)/bFGF group, n = 11; the VEGF (50 micrograms/ml)/bFGF group, n = 5; and the control group, n = 9. Control grafts were treated without cytokines. Endothelial coverage was greater for the cytokine immobilized groups (approximately equal to 50-60%) than for the control group (approximately equal to 30%). At the midportion of the triple VEGF immobilized group, many capillaries were seen in the neoarterial intima, and in the micropores, although such capillaries were rarely observed in the bFGF and control groups. Thus, impregnation of VEGF in the gelatinous layer of grafts enhanced transanastomotic tissue ingrowth and transmural capillary ingrowth.     

Pre-operative radio-chemotherapy enhances apoptotic cell death in oral squamous cell carcinoma

The effect of pre-operative radio-chemotherapy (RCT) has been examined in a total of 15 oral squamous cell carcinomas (SCCs), in terms of apoptosis (cell loss) and proliferation. All the patients received pre-operative radiation at a dosage of 30 or 40 Gy, as well as anticancer agents including tagaful (FT), 5-fluorouracil (5-FU), bleomycin (BLM) and peplomycin (PEP). Surgical specimens were obtained before and after RCT, and serial sections were prepared for immunohistochemistry for p53 oncoprotein and Ki-67 antigen, as well as for terminal deoxynucleotidyl transferase (TdT)-mediated dUTP-biotin nick end labeling (TUNEL). TUNEL indices (TI; percentage of TUNEL-positive cells in the tumor cells) before and after RCT were 1.2+/-1.1 and 4.7+/-2.9 in the nine well-differentiated oral SCCs, and 1.0+/-0.7 and 3.9+/-2.1 in the six poorly differentiated SCCs, respectively. Similarly, Ki-67 indices (KI; percentage of Ki-67 antigen-positive cells in tumor cells) before and after RCT were 31.1+/-14.2 and 15.8+/-11.1 in the former, and 37.1+/-7.8 and 8.7+/- 13.4 in the latter, respectively. Thus, pre-operative RCT enhanced apoptotic cell death and abated proliferative activity significantly (P<0.05), regardless of histological differentiation. Enhancement of apoptosis was more prominent in the group treated with FT or 5-FU than with BLM or PEP. Oral SCC with >20% of nuclear p53-positive tumor cells was noted in six cases. Enhanced TI and abadement of KI did not differ among the p53-positive and -negative tumors.