远距离移动负载高压电源的设计

为对远距离的直流移动负载进行供电,须考虑损耗、体积、指标等一系列的问题。要解决远距离损耗大的问题,则须采用在始端升压、负载端降压的措施;要使负载端的变换器体积小,则须提高系统频率,在变换器中采用高频变压器;要满足整个系统的指标,则须完成从部分到整体的设计过程。在此基础上,此供电电源采用AC/DC/DC变换的过程,始端变换器中采用三相PWM斩波稳压与12脉波整流相结合输出高压直流,然后经过远距离的电缆,负载端DC/DC变换器采用半桥三电平结构进行直流降压后为移动负载供电。文中分别对两个部分的拓扑以及工作原理进行了理论分析与仿真,仿真结果表明,供电电源采用这样的拓扑结构能够得到稳定的直流电压,并且不会影响始端的交流指标。     

Binary blends of nylons with ethylene vinyl alcohol copolymers: Morphological,thermal, rheological,and mechanical behavior

Binary blends of ethylene vinyl alcohol copolymers, containing 62 (EVOH-62) and 71 (EVOH-71) mole percent vinyl alcohols, with nylons (nylon-6, nylon-6/12, and nylon-12) have been prepared from melt mixing in a twin screw compounding machine. Morphological, thermal, rheological, and mechanical properties were determined. EVOH-62/nylon-6 and EVOH-71/nylon-6 blends showed homogeneous phase morphologies in the nylon-6-rich region, and fine phase separations (c.a. 2 × 10^?7 m) in the EVOH-rich region. Melting point depression, positive deviations in viscosity and flexural modulus, and negative deviation in impact strength from the simple additive rule were generally observed. And the results were possibly interpreted in terms of compatibility and increased nylon/EVOH interactions over the nylon/nylon interactions. On the contrary, clean phase separations in large domains were observed from EVOH-71/nylon-6/12 and EVOH-71 /nylon-12 blends. Fibrillation was also obtained from EVOH rich blends. Probably due to the incompatible nature of these blends, yield at low rate of shear and a mechanical property drop were also observed.     

Three schemes of remote information concentration based on ancilla-free phase-covariant telecloning

In this paper, remote information concentration is investigated which is the reverse process of the $1\rightarrow 3$ optimal asymmetric economical phase-covariant telecloning (OAEPCT). The OAEPCT is different from the reverse process of optimal universal telecloning. It is shown that the quantum information via $1\rightarrow 3$ OAEPCT procedure can be remotely concentrated back to a single qubit with a certain probability via several quantum channels. In these schemes, we adopt Bell measurement to measure the joint systems and use projected measurement and positive operator-valued measure to recover the original quantum state. The results shows non-maximally entangled quantum resource can be applied to information concentration.     

粉煤灰填充PVC树脂的研究

采用ＷＡＸＤ、ＳＥＭ和力学测试等方法对不同粒度和不同含量的粉煤灰（ＰＦＡ）与聚氯乙烯（ＰＶＣ）共混物的结构形态、力学性能进行了测定。结果表明，ＰＦＡ粒度对ＰＶＣ／ＰＦＡ共混物的性能具有明显影响，当ＰＦＡ粒度尺寸达到一定程度时，再降低ＰＦＡ粒度尺寸对共混物的性能影响不大。随着ＰＶＣ／ＰＦＡ共混物中ＰＦＡ含量的增加，拉伸强度和拉伸模量增大，但伸长率降低。     

模糊逻辑在模拟演练系统智能体设计中的应用

根据模拟演练系统对智能体智能程度的要求为模拟演练系统添加模糊推理机,以增加演练系统的逼真程度及适应性. 本文以模糊逻辑理论为基础,以模拟演练系统为背景,对一个具体的应用实例进行数学建模,阐述了如何运用模糊逻辑来解决问题,并设计了模糊逻辑模块,通过应用实例演示验证了设计的可行性.     

Preparation and characterization of a PMMA/Ce(OH)3, Pr2O3/graphite nanosheet composite

An easy process for the synthesis of poly(methyl methacrylate)/Ce(OH)₃, Pr₂O₃/graphite nanosheet (PMMA/Ce(OH)₃, Pr₂O₃/NanoG) composite was developed. Graphite nanosheets (NanoG) were prepared by treating the expanded graphite with sonication in aqueous alcohol solution. The PMMA/Ce(OH)₃, Pr₂O₃/NanoG composites were prepared via in situ polymerization of MMA monomer in the presence of graphite nanosheets and Ce(OH)₃, Pr₂O₃ through reverse micelle template, in which the methyl methacrylate was designated as the oily phase. The composites were then dispersed with chloroform and coated on glass slides to form films. Scanning and transmission electron microscopy were used to characterize the structure and dispersion of the graphite nanosheets and the composites. The results showed that the high-aspect-ratio structure of the nanosheets played an important role in forming a conducting network in the PMMA matrix. From thermogravimetric analysis, the introduction of graphite nanosheets and inorganic nanopartices exhibited a beneficial effect on the thermal stability of PMMA.     

Thermal and mechanical properties of the polymers synthesized by the sequential polymerization of propylene and 1‐hexadecene

The block copolymer of poly(1‐hexadecene) (PHD) and polypropylene (PP) was effectively synthesized by the sequential polymerization of propylene and 1‐hexadecene by using highly isospecific TiCl₃/Cp₂Ti(CH₃)₂ (Cp = cyclopentadienyl). The block copolymers had two separate melting temperatures of constituent blocks. The modulus of PHD–PP block copolymer was enhanced as the content of sequentially polymerized PP block was increased. The elongation at break showed positive deviation at the intermediate compositions from the simple additive values of constituent homopolymers. Shape memory effect which utilizes the crystalline PHD block as a reversible phase and the crystalline PP block as a fixed structure was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1709–1715, 2002; DOI 10.1002/app.10551     

宽带直流放大器的增益控制设计与研究

首先进行了方案论证与比较,分析各种方案的优点缺点,最后选择亚德诺半导体公司生产的低噪声增益可控集成运算放大器AD603和电流反馈型宽带运算放大器AD811等器件设计宽带直流放大器。输入级采用两级AD603级联,输出级设计通频带0~10MHz的带宽,通过单片机可以对放大器增益进行控制。该放大器具有频带宽、功率高、增益可调、带宽可选择等特点。此外,对提高直流放大器的各种性能指标提出了多种具体措施,在要求较高的系统中具有较强的实用性。     

磁力驱动器涡流损失的研究

对磁力驱动器金属隔离套在交变磁场中引起的涡流损失进行了理论计算 ,并与实测结果进行了对比。指出合理选择金属隔离套的相关参数 ,可以有效控制涡流损失的大小     

Effects of polyoxyethylene nonylphenol on dynamic mechanical properties and crystallization of polypropylene

Polypropylene (PP) was blended with polyoxyethylene nonylphenol (PN) in a twin-screw extruder and injection moulded. The dynamic mechanical properties of PP/PN blends were characterized by dynamic mechanical analyser (DMA). The glass transition temperature (T_g) of PP showed a slight decrease with incorporation of PN. Differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and polarized optical microscopy (POM) were employed to investigate the effects of PN on crystallization of PP. In a study of nonisothermal crystallization of PP and PP/PN blends, crystallization parameter analysis showed the addition of PN reduced the peak temperature of crystallization. β-form crystals of PP coexisted with α-form crystals in PP/PN blends, and oriented on the surface layer of injection moulded bar as revealed by WAXD. The degree of orientation was determined using Hermans orientation function. The thermal stability of β-form crystals was evaluated using high temperature WAXD and POM.