A process-tolerant out-of-band blocker rejection technique for SAW-less receivers

In this paper, an active filtering technique is presented which is capable of filtering the out-of-band blockers in wireless receivers. The concept is based on the feedforward cancellation technique where a blocker replica is subtracted at the output of the low-noise amplifier (LNA). In contrast to the previously reported feedforward cancellation methods, exact gain and phase matching are easily obtained in the proposed architecture to produce a highly selective narrowband frequency response at the output of the LNA with wide rejection bandwidth. For the proof of concept, the system is implemented in a 65 nm CMOS technology. It occupies a total area of 0.8 mm² and the current consumption is 24 mA from a 1.2 V supply. The system post-layout simulations showed a blocker rejection of more than 33 dB for blocker signals 100 MHz away from the desired signal when the feedforward path is activated. The noise figure (NF) of the entire system is 3.8 dB that degrades to 5.8 dB when the feedforward path is activated.     

Location Management in PCS Networks by Caching Two-Level Forwarding-Pointers

One of the challenging tasks in Personal Communication Services (PCS) is to efficiently maintain the location of PCS subscribers who move from one region to another (hereafter called mobile users). When a mobile user receives a call, the network has to quickly determine its current location. The existing location management scheme suffers from high signaling traffic in locating the mobile users. Two-level forwarding pointer scheme has been proposed from per-user forwarding pointer scheme to reduce the cost of signaling traffic. In this paper, we enhance the two-level forwarding pointer scheme. When a mobile user moves from its current Registered Area (RA), which is served by Mobile Switching Center (MSC), to another RA the local switch that acts as a parent of those two MSCs maintains this movement in its memory (hereafter called cache entry). A cache entry is used to locate rapidly the mobile user instead of querying the Home Location Register (HLR) and waiting for its reply. HLR is centralized in the network and far away from the mobile users so that the signaling traffic crossing it is expensive. Sometimes the cache entry may be failed to reach the mobile user then a two-level forwarding pointers will be created from the corresponding Visitor Location Register (VLR), attached to its MSC, through a correct path to locate the mobile user. Thus, there is a saving in cost of querying the underlying HLR. The analytical results indicate that such proposal efficiently reduces the signaling traffic cost for all values of Call to Mobility Ratio (CMR), this is especially considerable when CMR ≥1, without any increase in the call setup delay. Salah M. Ramadan (samohra@yahoo.com) received the BS and MS degrees from Computers Engineering Department, Al-Azhar University, Cairo, Egypt, in 1995 and 2002, respectively. From 2002, he was a Ph.D. student in Computers Engineering Department at Al-Azhar University and is currently pursuing the Ph.D. degree, where he is a research assistant in the Wireless Networks Branch. His research interests include traffic management in ATM networks, routing protocols, mobility management in PCS networks, and mobile computing. He is currently an instructor in Cisco Academy, Egypt. Ahmed M. El-Sherbini (Sherbini@mcit.gov.eg) received the Ph.D. in Electrical and Communication Engineering, Case Western University, U.S.A. March 1983 and M.Sc. in Communication Engineering, Cairo University, Giza, Egypt, June 1980. (M. Sc. Research Studies at the Ecole Nationale Superieure des Telecommunications (ENST), Paris, France). He is the Director, National Telecommunication Institute – Ministry of Communications and Information Technology, Egypt and Professor of Electrical and Communication Engineering Dept. Faculty of Engineering, Cairo University, Egypt. M. I. Marie received his B.Sc., M.Sc. and Ph.D. in electronic and communication engineering from Cairo University on 1972, 1981, 1985, respectively. Now he is a professor of communications at Computer and System Engineering department Al-Azhar University, Cairo, Egypt. His fields of interest includes digital communication, computer networks and protocols development. M. Zaki (azhar@mailer.scu.eun.eg) is the professor of software engineering, Computer and System Engineering Department, Faculty of Engineering, Al-Azhar University at Cairo. He received his B.Sc. and M.Sc. degrees in electrical engineering from Cairo University in 1968 and 1973 respectively. He received his Ph.D. degrees in computer engineering from Warsaw Technical University, Poland in 1977. His fields of interest include artificial intelligence, soft computing, and distributed system.     

Models of Restoration Probability in WDM Networks Employing Active Restoration

The ever-increasing demand for network bandwidth makes network survivability an issue of great concern. Lightpath restoration is a valuable approach to guaranteeing an acceptable level of survivability in WDM optical networks with better resource utilization than that of its protection counterpart. Active restoration (AR) is a newly proposed lightpath restoration scheme [M. Mostafa et al. OSA Journal of Optical Networking, vol. 3, no. 4, pp. 247–260] that combines the best of protection and reactive restoration while avoiding their shortcomings. In this paper, we conduct detailed performance analysis on the restoration probability of AR-based WDM networks. In particular, analytical models of restoration probability are developed respectively for networks with full-wavelength conversion capability and for networks without wavelength conversion capability under different backup path searching schemes. Based on the new models, we investigate the effects of wavelength availability, wavelength conversion capability, path length as well as backup path seeking methods on the restoration probability.     

A Combined Antenna Array and Multi-User Detection DS-CDMA Receiver in Single-Path and Multi-Path Fading Channels

An adaptive antenna array is incorporated into a decorrelatingmulti-user detector to effectively increase the DS-CDMA system capacity.Capacity improvement is due to beamforming gain, spatial diversity gain(assuming large angle spread), and the decorrelating effect. Thereceiver has been analyzed for the cases of sufficiently andinsufficiently spaced receiving antennas. The receiver consists of afront-end beamformer for every user in the cell and has knowledge of allusers' signature sequences. The beamformer estimates the desired userchannel vector, enhancing its signal and reducing the co-channelinterference from other directions. The multi-user detection, exploitingknowledge of other users, rejects those interferers whose arrival anglesare close to that of the desired user. The average uncoded Bit ErrorRate (BER) as a function of the number of in-beam active users, theaverage antenna Signal-to-Noise Ratio (SNR), and the number of receivingantennas is examined in both single-path and multi-path Rayleigh fadingchannels. Analysis shows an increase in system capacity proportional tothe number of receiving antennas.     

Study of features based on nonlinear dynamical modeling in ECG arrhythmia detection and classification

We present a study of the nonlinear dynamics of electrocardiogram (ECG) signals for arrhythmia characterization. The correlation dimension and largest Lyapunov exponent are used to model the chaotic nature of five different classes of ECG signals. The model parameters are evaluated for a large number of real ECG signals within each class and the results are reported. The presented algorithms allow automatic calculation of the features. The statistical analysis of the calculated features indicates that they differ significantly between normal heart rhythm and the different arrhythmia types and, hence, can be rather useful in ECG arrhythmia detection. On the other hand, the results indicate that the discrimination between different arrhythmia types is difficult using such features. The results of this work are supported by statistical analysis that provides a clear outline for the potential uses and limitations of these features.     

Détermination des perturbations induites aux extrémités d’une ligne blindée soumise à une excitation ponctuelle de courant

This article allows the determination of the induced perturbations at the ends of the coaxial line in wide frequency band enough. The perturbation source is a current direct point injection into the cable screen in any position. For this, we have applied the theory of the state variables, with foundation of the quasi-TEM approximation, in order to simulate the coaxial line above a ground level that has a finished conductivity. This allows us to supply the current and voltage expressions at the ends of the line as their analytic forms for any conditions of charge. Next, the elaborate objective is to verify experimentally on concrete applications if the test obtained results confirm the theoretical expectations supplied by calculation code finalizing.     

Cooperative Q‐learning techniques for distributed online power allocation in femtocell networks

In this paper, we address the problem of distributed interference management of femtocells that share the same frequency band with macrocells using distributed multi‐agent Q‐learning. We formulate and solve two problems representing two different Q‐learning algorithms, namely, femto‐based distributed and sub‐carrier‐based distributed power controls using Q‐learning (FBDPC‐Q and SBDPC‐Q). FBDPC‐Q is a multi‐agent algorithm that works on a global basis, for example, deals with the aggregate macrocell and femtocell capacities. Its complexity increases exponentially with the number of sub‐carriers in the system. Also, it does not take into consideration the sub‐carrier macrocell capacity as a constraint. To overcome these problems, SBDPC‐Q is proposed, which is a multi‐agent algorithm that works on a sub‐carrier basis, for example, sub‐carrier macrocell and femtocell capacities. Each of FBDPC‐Q and SBDPC‐Q works in three different learning paradigms: independent (IL), cooperative (CL), and weighted cooperative (WCL). IL is considered the simplest form for applying Q‐learning in multi‐agent scenarios, where all the femtocells learn independently. CL and WCL are the proposed schemes in which femtocells share partial information during the learning process in order to strike a balance between practical relevance and performance. We prove the convergence of the CL paradigm when used in the FBDPC‐Q algorithm. We show via simulations that the CL paradigm outperforms the IL paradigm in terms of the aggregate femtocell capacity, especially in networks with large number of femtocells and large number of power levels. In addition, we propose WCL to address the CL limitations. Finally, we evaluate the robustness and scalability of both FBDPC‐Q and SBDPC‐Q, against several typical dynamics of plausible wireless scenarios (fading, path loss, random activity of femtocells, etc.). We show that the CL paradigm is the most scalable to large number of femtocells and robust to the network dynamics compared with the IL and WCL paradigms. Copyright © 2014 John Wiley & Sons, Ltd.     

Resistivity dependence of minority carrier lifetime and cell performance in p-type dendritic web silicon ribbon

This study shows that the bulk lifetime in 95 μm thick p-type dendritic web silicon solar cells is a strong function of bulk resistivity. The higher the resistivity, the greater the bulk lifetime. This behavior is explained on the basis of dopant–defect interaction, which increases the lifetime limiting trap concentration with the addition of dopant atoms. Model calculations show that in the absence of doping dependence of bulk lifetime (τ), 2 Ω cm web should give the best cell efficiency for bulk lifetimes below 30 μs. However, strong doping dependence of bulk lifetime in p-web cells shifts the optimum resistivity from 2 to 15 Ω cm. Bulk lifetime in the as-grown web material was found to be less than 1 μs for all the resistivities. After the cell processing which involves phosphorus gettering, aluminum gettering, and SiN induced hydrogen passivation of defects, the bulk lifetime increased to 6.68, 11, 31 and 68.9 μs in 0.62, 1.37, 6.45 and 15 Ω cm p-type web material, respectively. Therefore, cell process induced recovery of lifetime in web is doping dependent, which favors high resistivity. Solar cells fabricated on 95 μm thick web silicon by a manufacturable process involving screen-printing and belt-line processing gave 14.5% efficient 4 cm² cells on 15 Ω cm resistivity. This represents a record efficiency for such a thin manufacturable screen-printed cell on a low-cost PV grade Si ribbon that requires no wafering or etching.