ABSORPTION AND DESORPTION TO AND FROM LIQUID FILMS ON INCLINED PLANES

Two published theoretical models are examined and applied to experimental results for absorption and desorption. The system used was CO₂/H₂O and studies were made for liquid film flow down inclined planes. Experimental results give “Reduced” values of mass ransfer rates.

Interferometric studies give interfacial concentration, penetration and film depths, and take-up of carbon dioxide. In the case of desorption the interferograms are distorted by “deflections.”

All the experimental values for absorption and desorption differ from those calculated from theoretical models.

Desorption is not a mirror image of absorption, and it is approximately 75% of the transfer rate of absorption over a wide operating range.

A comparison is made of the behaviour of static pools and flowing liquid films.     

Absolute Stability of Nonlinear Systems with Two Additive Time-varying Delay Components

In this paper, we present a new sufficient condition for absolute stability of Lure system with two additive time-varying delay components. This criterion is expressed as a set of linear matrix inequalities (LMIs), which can be readily tested by using standard numerical software. We use this new criterion to stabilize a class of nonlinear time-delay systems. Some numerical examples are given to illustrate the applicability of the results using standard numerical software.     

A neural framework for adaptive robot control

This paper investigates how dynamics in recurrent neural networks can be used to solve some specific mobile robot problems such as motion control and behavior generation. We have designed an adaptive motion control approach based on a novel recurrent neural network, called Echo state networks. The advantage is that no knowledge about the dynamic model is required, and no synaptic weight changing is needed in presence of time varying parameters in the robot. To generate the robot behavior over time, we adopted a biologically inspired approach called neural fields. Due to its dynamical properties, a neural field produces only one localized peak that indicates the optimum movement direction, which navigates a mobile robot to its goal in an unknown environment without any collisions with static or moving obstacles.     

Integrating customer's preferences in the QFD planning process using a combined benchmarking and imprecise goal programming model

Quality function deployment (QFD) is a customer-oriented design tool for developing new or improved products to achieve higher customer satisfaction by integrating various functions of an organization. The engineering characteristics (ECs) affecting the product performances are designed to match the customer attributes (CAs). However, from the viewpoint of the QFD team, product design processes are performed in imprecise environments, and more than one factor must be taken into account in determining the target levels of ECs, especially the limited resources and increased market competition. This paper presents an imprecise goal programming (GP) approach to determine the optimum target levels of ECs in QFD for maximizing customer satisfaction under resource limitation and considerations of market competition. Based on benchmarking data of CAs, the concept of satisfaction functions is utilized to formulate explicitly the customer's preferences and to integrate the competitive analysis of target market into the modelling and solution process. In addition, the relationships linking CAs and ECs and the ECs to each other are integrated by functional relationships. The proposed approach will be illustrated through a car door design example.     

Hop chains: Secure routing and the establishment of distinct identities

We present a secure routing protocol that is immune to Sybil attacks and that can tolerate collusion of Byzantine routers. It can tolerate either initial collusion of Byzantine routers or runtime collusion of non-adjacent Byzantine routers, both in the absence of runtime collusion between adjacent routers. For these settings, the calculated distance from a destination to a node is not smaller than the actual shortest distance from the destination to the node. The protocol can also simultaneously tolerate initial collusion of Byzantine routers and runtime collusion of adjacent Byzantine routers but in the absence of runtime collusion between non-adjacent routers. For this setting, it guarantees a bound on the difference between the calculated distance and the actual shortest distance. The bound depends on the number of Byzantine routers on a path. The protocol makes very weak timing assumptions and requires synchronization only between neighbors or second neighbors. We propose to use this protocol for secure localization of routers using hop-count distances, which can be then used as a proof of identity of nodes.     

Experimental analysis and numerical modelling of the forming process of polypropylene replicas of micro-cavities using hot embossing

Numerical modelling of the deformation of a polymer using the finite elements method in axisymetrical mode was performed using the LsDyna^® software to describe the filling of micro-cavities during the forming process of the material using the hot embossing. These simulations firstly allow verifying whether the chosen forming process conditions promote or not an optimized filling of the superficial cavities in order to achieve precise replicas which best reproduce the superficial topography of the mould. The simulations were carried out to evaluate the filling of the cavities taking into account the mechanical behaviour of the selected polymer into the model. Moreover, these models were developed to verify the effect of the distribution of the mould cavities on their filling. The influence of the mobility of non deformable rigid plates on the filling of the cavities represents an auxiliary variable. In the approach presented, the compression plates are assumed to be parallel and non deformable, whereas the polymer disk follows a rubbery behaviour around a temperature equal to 140°C. Globally the modelling results are satisfactory for they are rather close to the experimental observations conducted. In summary, the effect of the normal stress as also the distribution of micro-cavities at the mould surface seem to prevail in the case of the forming process by hot embossing.     

Help-Training for semi-supervised support vector machines

In this paper, we propose to reinforce the Self-Training strategy in semi-supervised mode by using a generative classifier that may help to train the main discriminative classifier to label the unlabeled data. We call this semi-supervised strategy Help-Training and apply it to training kernel machine classifiers as support vector machines (SVMs) and as least squares support vector machines. In addition, we propose a model selection strategy for semi-supervised training. Experimental results on both artificial and real problems demonstrate that Help-Training outperforms significantly the standard Self-Training. Moreover, compared to other semi-supervised methods developed for SVMs, our Help-Training strategy often gives the lowest error rate.     

Constructing malware normalizers using term rewriting

A malware mutation engine is able to transform a malicious program to create a different version of the program. Such mutation engines are used at distribution sites or in self-propagating malware in order to create variation in the distributed programs. Program normalization is a way to remove variety introduced by mutation engines, and can thus simplify the problem of detecting variant strains. This paper introduces the “normalizer construction problem” (NCP), and formalizes a restricted form of the problem called “NCP=”, which assumes a model of the engine is already known in the form of a term rewriting system. It is shown that even this restricted version of the problem is undecidable. A procedure is provided that can, in certain cases, automatically solve NCP= from the model of the engine. This procedure is analyzed in conjunction with term rewriting theory to create a list of distinct classes of normalizer construction problems. These classes yield a list of possible attack vectors. Three strategies are defined for approximate solutions of NCP=, and an analysis is provided of the risks they entail. A case study using the virus suggests the approximations may be effective in practice for countering mutated malware. R. Mathur is presently at McAfee AVERT Labs.     

The use of an electrothermal plasma gun to simulate the extremely high heat flux conditions of a tokamak disruption

Disruption damage conditions for future large tokamaks like ITER are nearly impossible to simulate on current tokamaks. The electrothermal plasma source SIRENS has been designed, constructed, and operated to produce high density (> 10²⁵/m³), low temperature (1–3 eV) plasma formed by the ablation of the insulator with currents of up to 100 kA (100 s pulse length) and energies up to 15 kJ. The source heat fluence (variable from 0.2 to 7 MJ/m²) is adequate for simulation of the thermal quench phase of plasma disruption in future fusion tokamaks. Different materials have been exposed to the high heat flux in SIRENS, where comparative erosion behavior was obtained. Vapor shield phenomena has been characterized for different materials, and the energy transmission factor through the shielding layer is obtained. The device is also equipped with a magnet capable of producing a parallel magnetic field (up to 16 T) over a 8 msec pulse length. The magnetic field is produced to decrease the turbulent energy transport through the vapor shield, which provides further reduction of surface erosion (magnetic vapor shield effect).